Help - Search - Members - Calendar
Full Version: Backu My Pc, Why Still Using Floppys?
Roxio Community > Easy Media Creator Products > Legacy Creator Products > Easy Media Creator 7, 7.5 and 8 > Easy Media Creator 8 > EMC 8 - Backup
andyloc
Hi Ihave just got EMC8.
Backup myPC looks good, however I went to use the disaster recovery, which sounds a bit like the Ghost program for a total snapshot of your PC.

However it sked for 4 flopptys, I dont have a floopy drive on my machine, most new PCs dont come with them, surely you should be able to boot from a CD now??

anyone help?
The Highlander
Hi Andyloc, reading all the documentation in this little app all comes back to what you are saying, it only looks like you can use floppys for restore or by rebuilding the pc clean and re-installing EMC8 then restoring from media that way, both dont probably suit what you are looking for,
you could make a cd from the 4 disks but you would have to be very good and making auto run cd's
Maybe some one can post a way for you to do this without the cd's?

here is the documents details over DR side of disk making..(you have prob read this already?)

Windows XP Professional and Media Center Edition Disaster Recovery Set
To create your Windows XP Professional Disaster Recovery Set, you will need the following:

Four (4) blank, formatted 1.44MB diskettes
Windows XP Professional installation CD
Media for your backup device
It is recommended that you label your media when prompted in the Wizards, and store your DR Set in a safe place.

To create your Windows XP Professional Disaster Recovery Set:

Select Recovery Wizard... from the Tools menu.
The Recovery Wizard appears

Follow the instructions on the Wizard screens to create your Disaster Recovery Set.
Windows XP Professional CD
Due to a licensing agreement with Microsoft, some computer manufacturers may not provide full, retail versions of the Windows XP Professional CD with their systems. Backup MyPC requires this CD in order to create the Disaster Recovery Set, which restores the operating system in the event of a hard drive failure.

If you did not receive the Windows XP Professional CD, you will not be able to perform a Disaster Recovery. See Restoring all your files after a hard drive failure for information on how you can still protect your valuable data.

Note: Windows XP does not support testing the Disaster Recovery Set.
andyloc
yes, it seems a bit daft to still be using floppys doesnt it?

Can anyone make a CD? can roxio not!!??

That would be the best idea?

if not I will have to go back to using Acronsis true image.

Has anyone tried it with the flopys? does it work just as Ghost or ddrive image would?

thanks
The Highlander
Andyloc said: Has anyone tried it with the flopys? does it work just as Ghost or ddrive image would?

Hi Andy, my answer is no from me anyway... but it looks sound, ill try it on a test unit over the weekend and give you feedback on it if you want?
andyloc
that would be great, if you wouldnt mind.

Then I just need a boot CD to get working
thanks
cdanteek
QUOTE (andyloc @ Jan 25 2006, 09:46 AM) *
that would be great, if you wouldnt mind.

Then I just need a boot CD to get working
thanks



Create an autorun.inf file using Wordpad, Notepad, or any text editor. It should look like this:

[autorun]
OPEN=(name of program to run).exe

For example to autorun setup.exe:

[autorun]
OPEN=setup.exe


make sure the .exe and autorun.inf files are in the root directory of the cd.

cdanteek
ggrussell
I'm sure Backup MyPC uses a custom compression technique so you would have to use the 4 floppies unless you can create a bootable CD from those. Also most newer computers do not include a Windows install disc which will prevent you from using Backup MyPC. The Window's install CD is needed regardless of the version of Windows -- even Windows XP Home.
andyloc
QUOTE (cdanteek @ Jan 25 2006, 02:07 PM) *
Create an autorun.inf file using Wordpad, Notepad, or any text editor. It should look like this:

[autorun]
OPEN=(name of program to run).exe

For example to autorun setup.exe:

[autorun]
OPEN=setup.exe
make sure the .exe and autorun.inf files are in the root directory of the cd.

cdanteek


Have you tried this? can you get it to work? I dont hve a floppy to start with so am snookered sad.gif

If you coud have a go for me that would be great, PM me if you have any luck please
thanks
Andy
andyloc
Hi you said you might be able to do a test for backup as per the forum on EMC backup?

Did you try it? did it work?

cheers

QUOTE (rydall2000 @ Jan 24 2006, 11:32 AM) *
Hi Andyloc, reading all the documentation in this little app all comes back to what you are saying, it only looks like you can use floppys for restore or by rebuilding the pc clean and re-installing EMC8 then restoring from media that way, both dont probably suit what you are looking for,
you could make a cd from the 4 disks but you would have to be very good and making auto run cd's
Maybe some one can post a way for you to do this without the cd's?

here is the documents details over DR side of disk making..(you have prob read this already?)

Windows XP Professional and Media Center Edition Disaster Recovery Set
To create your Windows XP Professional Disaster Recovery Set, you will need the following:

Four (4) blank, formatted 1.44MB diskettes
Windows XP Professional installation CD
Media for your backup device
It is recommended that you label your media when prompted in the Wizards, and store your DR Set in a safe place.

To create your Windows XP Professional Disaster Recovery Set:

Select Recovery Wizard... from the Tools menu.
The Recovery Wizard appears

Follow the instructions on the Wizard screens to create your Disaster Recovery Set.
Windows XP Professional CD
Due to a licensing agreement with Microsoft, some computer manufacturers may not provide full, retail versions of the Windows XP Professional CD with their systems. Backup MyPC requires this CD in order to create the Disaster Recovery Set, which restores the operating system in the event of a hard drive failure.

If you did not receive the Windows XP Professional CD, you will not be able to perform a Disaster Recovery. See Restoring all your files after a hard drive failure for information on how you can still protect your valuable data.

Note: Windows XP does not support testing the Disaster Recovery Set.
daiwe
QUOTE (rydall2000 @ Jan 24 2006, 06:32 AM) *

If you did not receive the Windows XP Professional CD, you will not be able to perform a Disaster Recovery. See Restoring all your files after a hard drive failure for information on how you can still protect your valuable data.

I wonder about a 2K or XP MSDN distribution. Will any full version work or does it test for the distribution?
bobA
Hey, did I miss something? The original problem was that the PC didn't have a floppy. Without a floppy, how can they be converted to a CD? All you can do is wait till 8.06 comes out and maybe Roxio will first look for the floppy drive and take an alternate path to do it all on CD or DVD. ohmy.gif
StanC
Yeah, i really dont think theres a way around the 4 floppies. You can always pick up a USB floppy drive. They go for cheap nowadays anyway.
T.O.T.G.
QUOTE (Last Post)
Posted Jul 28 2006, 12:39 PM

QUOTE (From user's profile)
Last Active 28th July 2006 - 12:39 PM

tongue.gif

Not to mention the guy was allready posting in a 4 month old thread tongue.gif
chuckz
I'm a new user of Roxio backup software. I can't believe I just spend $58 for software that asks for 1.44 diskettes to make a recovery media!

When I first tried to make a full backup, the program said I had bad media. (It was new maxell DVD+R) Tried another and went OK. Tried again to make a full backup, failed during the data check process. What media is acceptable?

Now I can't make a recovery CD. Tried using the Roxio "intelligent data base". Oximoron! Anyhow, can you suggest another vendor? I figure I'm out the $58 and move on. Oh wow, I like the phone charges for new out of box software. This is 2006 not 1986. Software should work out of box without all these warnings during initall.

I used to like playing around with programs until they worked. I'm beyond that now.
grandpabruce
QUOTE (chuckz @ Aug 22 2006, 10:31 PM) *
I'm a new user of Roxio backup software. I can't believe I just spend $58 for software that asks for 1.44 diskettes to make a recovery media!

When I first tried to make a full backup, the program said I had bad media. (It was new maxell DVD+R) Tried another and went OK. Tried again to make a full backup, failed during the data check process. What media is acceptable?

Now I can't make a recovery CD. Tried using the Roxio "intelligent data base". Oximoron! Anyhow, can you suggest another vendor? I figure I'm out the $58 and move on. Oh wow, I like the phone charges for new out of box software.


Search the net for another program.
chuckz
QUOTE (grandpabruce @ Aug 22 2006, 07:36 PM) *
Search the net for another program.


I'm doing it now. smile.gif
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.
Invision Power Board © 2001-2009 Invision Power Services, Inc.