Jump to content

johnata

Members
  • Content Count

    58
  • Joined

  • Last visited

Community Reputation

0 Neutral

About johnata

  • Rank
    Novice
  1. johnata

    Roxio Label Creator

    Roxio Label Creator (NXT Pro 4) has an issue that was described exactly in this thread (http://forums.support.roxio.com/topic/35613-roxio-label-creator-emc-10-question-and-answer/?do=findComment&comment=531956) even though it was written for an earlier version. I'm glad that this thread was around to help me printing labels *today* and get around it since the solution worked as described. Unfortunately, someone didn't like the fact that I replied to that thread describing a further problem even with the solution and locked the thread. The reason is because the original problem was for an old product. I'd like to remind him any anyone else who is listening that just because an issue has been reported in an old version, it does not mean it isn't relevant in even the latest version and can be helpful. It certainly was to me. I'm reposting this here because it still exists on Windows 10 Pro with NXT Pro 4.. The problem is when printing labels using label paper that has two labels, only the first one is used even if the count is adjusted. For example, if I adjust the count from 1 to 2, it says 1 sheet is used. But it only prints 1 label on the sheet. If I adjust the count to 3 or 4, it says two sheets are used but only 1 label is printed per sheet. Someone kindly suggested in that "old thread" that I click on the bottom label in the preview and that does work - however, it only works for 1 sheet. This is the response I added to the old thread: "The problem is that when you click on the lower label, the count goes to 2. If you wanted to print 2 sheets of 2/sheet, then incrementing the count to 4 after clicking on the bottom image looks like it will work but will print one sheet at 1/sheet and one sheet at 2/sheet. If you have 3 sheets, all but the last sheet is printed at 1/sheet. The only way I could get this to work is print 1 sheet at a time. This is really awful!!!" This exists today printing on commercial paper (Avery labels) on Roxio Creator NXT Pro 4. It would be nice if a more meaningful response was given instead of locking the thread.
  2. The problem is that when you click on the lower label, the count goes to 2. If you wanted to print 2 sheets of 2/sheet, then incrementing the count to 4 after clicking on the bottom image looks like it will work but will print one sheet at 1/sheet and one sheet at 2/sheet. If you have 3 sheets, all but the last sheet is printed at 1/sheet. The only way I could get this to work is print 1 sheet at a time. This is really awful!!!
  3. johnata

    Roxio Central 2012 No Longer Starts

    I don't use the player very often, however I do have 8.0.1.40 installed, the version that was on the Roxio Creator 2012 DVD - the update was for 9.0.1, I believe.
  4. johnata

    Roxio Central 2012 No Longer Starts

    The problem was with the new nvidia driver (310.70) that I installed around the same time. Rolling back to the previous driver (306.97) fixed this. I'm not sure if there's a problem with 310.70 itself or it was installed incorrectly but right now its working fine and I don't have the time to troubleshoot. Would you recommend updating DivX seeing it doesn't have anything to do with the problem or keep the one that came with EMC?
  5. After installing a DivX update today, clicking on the Roxio Creator 2012 Pro desktop icon merely displays a mostly empty window with a frame at the bottom telling me to upgrade to the next version for a discount. This was working a few weeks ago so it might have been something else... In addition, the program is looping (burning CPU time at about 13%) and never stops. Closing the window stops everything but starting it back up gives the same scenario. I tried a repair and even uninstall DivX but that didn't change anything. I do not want to upgrade at this time - does anyone have any ideas?
  6. johnata

    Disk Information Anomoly

    Thanks for confirming, I appreciate it. I guess this isn't high priority by any means but is there a way to report this or is this forum good enough? -- John
  7. johnata

    Disk Information Anomoly

    Sorry I wasn't precise with the instructions - I can only get it to hang if I start Disc Information from the Most Frequent Task pane, not from Tools/Disc Information. Can you repeat the scenario only starting from there? -- John
  8. Can someone try this secnario? Start up EMC 10 from the top level. Select Tools/Disc Information. After the disk information screen displays, hit the spacebar. Does it hang indefinitely? I hit the spacebar by mistake and was forced to kill the Roxio process. Anyone know what the spacebar does? -- John
  9. johnata

    SessionLauncher

    For whatever it's worth, I disabled the service in the "administrative tools/services" applet. Not as clean as removing it from the registry but it works for now. -- John
  10. johnata

    SessionLauncher

    I see the same error in my logs, I'm using EMC 10 but have upgraded from previous versions. -- John
  11. For whatever it's worth, EMC 10 appears to fix the problem reported in this thread with Creator Classic. At least it did for me, YMMV. Before buying, however, two things must be said: 1) Drag-to-disc is no longer supported or included - no biggie for me because I never used it. 2) Backup MyPC is no longer included. They have an imaging solution which seems to duplicate it. I used Backup MyPC as a backup to another imaging solution but I guess it's matured enough now where I don't need to do that. -- John
  12. Of course the problem I had in mind is what this thread is about - Creator Classic misbehaving... I didn't know there was an EMC10 forum, I'll go take a look... -- John
  13. Anyone know if Creator 10 fixes this problem? I hate to pay for the same bugs... -- John
  14. johnata

    Creator Basic 9 and Easy Media Creator 9

    No problem, I corrected a typo in my original post which was confusing... sorry about that. -- John
  15. johnata

    Creator Basic 9 and Easy Media Creator 9

    Best Buy has the software without the interface? There's no way to upgrade without the interface, right? At least that's what Roxio tells me. -- John
×