Roxio Community: VCD won't play on DVD player, poor quality on other computers - Roxio Community

Jump to content

Roxio Community
Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

VCD won't play on DVD player, poor quality on other computers Need production assistance

#1 User is offline   ctrap85 

  • Newbie
  • Pip
  • Group: Members
  • Posts: 1
  • Joined: 04-October 06

Posted 04 October 2006 - 06:57 AM

I use Roxio Videowave Movie Creator to capture and edit video. I capture the video in DV compressed AVI format. My son needs to send a short video to college coaches for recruiting purposes. I took clips of my son out of several AVI movies, rendered each clip in MPEG-2 (Best Quality Playback On This Computer) and produced a 6 minute video, also rendered in MPEG-2, with an introduction and transitions. I burned it to a VCD using Sonic MyDVD, but it won’t play on either of my DVD players. The title page appears, but I can’t play the video. (Other VCDs I’ve burned using MPEG-1 video do play on my DVD players, but for this project, I need the best video quality possible.) The VCD does play well on my computer, but the title page does not appear. The VCD also plays on other computers, but the video is not as crisp and the lettering on the introduction clip and on each of the other clips (his uniform color and number) are choppy. I could burn it to DVD+R, but I’m afraid that a coach may not have the capacity to play that format, and I’ve heard that a VCD is more universal. Does anyone have any suggestions? Should I be rendering the clips in a different format? Thank you.
0

#2 User is offline   Larry 

  • Digital Guru
  • PipPipPipPipPipPip
  • Group: Digital Guru
  • Posts: 11,175
  • Joined: 04-January 06

Posted 04 October 2006 - 07:24 AM

View Postctrap85, on Oct 4 2006, 09:57 AM, said:

I use Roxio Videowave Movie Creator to capture and edit video. I capture the video in DV compressed AVI format. My son needs to send a short video to college coaches for recruiting purposes. I took clips of my son out of several AVI movies, rendered each clip in MPEG-2 (Best Quality Playback On This Computer) and produced a 6 minute video, also rendered in MPEG-2, with an introduction and transitions. I burned it to a VCD using Sonic MyDVD, but it won't play on either of my DVD players. The title page appears, but I can't play the video. (Other VCDs I've burned using MPEG-1 video do play on my DVD players, but for this project, I need the best video quality possible.) The VCD does play well on my computer, but the title page does not appear. The VCD also plays on other computers, but the video is not as crisp and the lettering on the introduction clip and on each of the other clips (his uniform color and number) are choppy. I could burn it to DVD+R, but I'm afraid that a coach may not have the capacity to play that format, and I've heard that a VCD is more universal. Does anyone have any suggestions? Should I be rendering the clips in a different format? Thank you.
Actually, VCD is not very universal when it comes to set top player compatability, especially on newer (last year or so) models. Many current models do not support it now that home DVD creation has taken off more. If it was me, I'd go the DVD route. MPEG2 is the standard video format it uses, and it will give you the best quality and most compatibility.
Larry
Registered Member Creator 2010 Pro, Creator 2009 Ultimate, EMC 10, 9, 8 Deluxe, 7.5, 7, ECDC 6,5,4

Dell Precision WorkStation 450 / 2 - Intel Xeon 2.80ghz CPU w/HT, 512mb L2 Cache, 533mhz Bus / 2gb RAM / 1800gb+ HDD's / NVIDIA GeForce 6200 / Lite-On 165H6S CD DVD+/- DVD+/-DL / Plextor PX-708UF /
Hauppage WinTV HVR-950Q / Hauppage WinTV PVR PCI II 250 / Hauppage WinTV PVR USB2 / XP Pro SP3 / Windows 7
0

#3 User is offline   ml 

  • Digital Guru
  • PipPipPipPipPipPip
  • Group: Digital Guru
  • Posts: 11,045
  • Joined: 04-January 06

Posted 04 October 2006 - 01:02 PM

View PostLarry, on Oct 4 2006, 10:24 AM, said:

Actually, VCD is not very universal when it comes to set top player compatability, especially on newer (last year or so) models. Many current models do not support it now that home DVD creation has taken off more. If it was me, I'd go the DVD route. MPEG2 is the standard video format it uses, and it will give you the best quality and most compatibility.


And VCD quality is terrible. :huh: I think it's a mpeg1 file which is very low resolution.

Burn it to a DVD + R AND a DVD - R if you have the capability to do that, and then mail both copies.

There are some DVD players and computers that will only play one type of DVD, but they are getting harder to find. The coach probably has access to a variety of equipment at the school.

Good luck! :)
ml

flying squirrel......"It's more of a gliding thing....."



Intel® Core™2 Duo 2.2 Ghz desktop processor E4500;
3GB DDR2 memory;
DL DVD±RW/CD-RW drive;
500GB SATA 7200 rpm hard drive;
Windows Vista Home Premium ,
ATI RADEON HD 2400,Built-in TV tuner , High-definition audio (8-speaker support), HDMI
Multiformat media reader,
IEEE 1394 (FireWire) interface and 6 high-speed USB 2.0 ports,
PCI card with 4 USB 2.0 and 2 IEEE 1394 ports,
10/100/1000 Gigabit Ethernet


0

#4 User is online   cdanteek 

  • Digital Guru
  • PipPipPipPipPipPip
  • Group: Digital Guru
  • Posts: 19,287
  • Joined: 04-January 06
  • Gender:Male
  • Location:Prairie Rapids Crossing.

Posted 04 October 2006 - 02:49 PM

Quote

And VCD quality is terrible. I think it's a mpeg1 file which is very low resolution.


I have to disagree, VCD quality is not terrible!
It is MPEG1 at these rates.
VCD Resolution NTSC/PAL 352x240 352x288 Video Compression MPEG1 Video bitrate 1150 kbit/sec constant bitrate
Audio Compression MPEG1 Audio bitrate kbit/sec 224 kbit/s

MPEG1 during compression takes out redundant frames and audio highs and lows, most people don't hear.

Is MPEG1 as good as MPEG2 no!

MPEG2 DVD at these rates.
DVD Resolution NTSC/PAL 720x480 720x576 Video Compression MPEG2 Video bitrate 3000-9000 kbit/s variable bitrate or constant bitrate
Audio Compression, MPEG2, AC3, DTS, PCM
Audio bitrate 192-448 kbit/s

I agree, if you have the capability, a DVD burner and good + -R media.
I would make a DVD disc for your presentation. Like you say ( I need the best video quality possible.)

Just remember making a DVD from not very good quality source files, makes not very good quality DVD's. The rule, garbage in garbage out.

cdanteek
cd
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Intel i7-950, Asus P6X58D Premium, Asus GeForce GTX 460 1GB 256-bit GDDR5, 12 GB Corsair Dominator Triple Channel DDR3 1600 SDRAM, Sound Blaster X-Fi Titanium Fatal1ty Professional, Corsair Hydro CWCH50-1 CPU Cooler, Crucial RealSSD C300 128 GB SATA III OS Drive, Raid 0 Stripe Array, JBOD, W-7 Ultimate x64.. cdanteek built...

Intel C2D E8500, Asus P5Q3 Deluxe WIFI, ATI HD 4850 512MB GDDR3, 4 GB Corsair XMS3 DDR3-1600, X-Fi XtremeMusic, JBOD, W-7 Pro x64 W-7 HP x32, Vista & XP HM x32. cdanteek built...

BenQ 1640, 1650, 1655, Dell Qflix PLDS DX-20A6Q 6D14, LiteOn DH20A6S, NEC 3550, Pioneer BDR 205, Plextor 712, 716, Samsung SH-S203N, Samsung SH-S243N, Sony 800A, 810A, 810A-R

1.Click here Beginners Guide - Blank DVD Media Type Definitions & What A Firmware Upgrade Is for Your Burner.
2.Click here Firmware HQ - site dedicated to providing you with the latest firmware releases for your optical disc drives.
3.Click here CD-DVD Speed
4.Click here CD-DVD Speed - A user guide
5.Click here Enabling/Checking DMA in Windows Vista, XP, 2000, Me, 9x.
6.Click hereYou can no longer access the CD drive or the DVD drive.
7.click here Drive Not Recognized By Roxio, PX Engine 3_00_58a. Old Version<-> EMC 7.5 Up PX Engine 4.18.16a. Update .Click here
8.Click here How to uninstall IE 7 and WMP 11.
9.Click here ImgBurn Current version: 2.5.3.0 (5,262 KB) CD / DVD / HD DVD / Blu-ray burning application
10.Click here InfoTool (Drive, Disk, Configuration, Software, Hardware, DMA settings, etc.).
11.Click here. Complete Uninstall of Creator 2011 & Creator 2012
12.Click here. Complete Uninstall of Creator 2009 and 2010 (Windows Vista and 7)
13.Click here Complete Uninstall of Creator 2009 and 2010 (Windows XP)
14.Click here Complete Uninstall of Easy Media Creator 9 & 10 on Windows Vista
15.Click here Complete Uninstall of Easy Media Creator 7.5, 8, 9, & 10 on Windows XP
16. Click here WinZip Data Compression Utility <> Click here WinRAR Data Compression Utility Click here 7-Zip Data Compression Utility
0

#5 User is offline   ml 

  • Digital Guru
  • PipPipPipPipPipPip
  • Group: Digital Guru
  • Posts: 11,045
  • Joined: 04-January 06

Posted 04 October 2006 - 06:51 PM

Sorry. I was just speaking from my personal observations.

I didn't have very good luck with VCD quality using my DVD player. Most of my family couldn't stand to watch it on the tv. Of course, I was using video that had been converted from analog to digital so the quality wasn't spectacular to begin with.

It played ok on my computer, but that screen was smaller than my TV.

I'm sure digital video would be better, but as you say.... not all DVD players will play VCDs.
ml

flying squirrel......"It's more of a gliding thing....."



Intel® Core™2 Duo 2.2 Ghz desktop processor E4500;
3GB DDR2 memory;
DL DVD±RW/CD-RW drive;
500GB SATA 7200 rpm hard drive;
Windows Vista Home Premium ,
ATI RADEON HD 2400,Built-in TV tuner , High-definition audio (8-speaker support), HDMI
Multiformat media reader,
IEEE 1394 (FireWire) interface and 6 high-speed USB 2.0 ports,
PCI card with 4 USB 2.0 and 2 IEEE 1394 ports,
10/100/1000 Gigabit Ethernet


0

Share this topic:


Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users