Help
Roxio Community
Does anyone have any ideas as to what's going on???
--BigDog
This post has been edited by BigDog: 24 January 2007 - 08:00 AM
Page 1 of 1
Can't Get Drag to Disc Working Can't get Drag to Disc to Load properly
#1
- Newbie
-
- Group: Members
- Posts: 1
- Joined: 24-January 07
Posted 24 January 2007 - 07:59 AM
I tried to a full installation of Media Creator 8, but during restart, I get a dialog box that says "Drag to Disc could not be started because components necessary to run are missing. Please reinstall Drag to Disc." I've tried to repair the installation, I've tried re-installing, and I've tried the custom installation of Drag to Disc with no luck.
Does anyone have any ideas as to what's going on???
--BigDog
Does anyone have any ideas as to what's going on???
--BigDog
#2
- Digital Guru
-
- Group: Digital Guru
- Posts: 16,915
- Joined: 10-February 06
- Gender:Male
- Location:Belfast, Ireland
Posted 24 January 2007 - 08:17 AM
Do you have any other packet writing s/w on your system (Sonic DLA, Nero INCD or similar)?
If it ain't broke, fiddle with it until it breaks, then fiddle with it until you get it fixed
"Rincewind could scream for mercy in nineteen languages and just scream in another forty-four "
"If computers get too powerful, we can organize them into a committee; that will do them in."
“Computers have enabled people to make more mistakes faster than almost any invention in history, with the possible exception of tequila and hand guns.” — Mitch Ratcliffe
Daithi
Home Brew computer
Intel I7 950 on Gigabyte X58A UD3R mobo
12 GB Three Channel DDRAM
Radeon HD4850 512 MB GDR3 graphics
Signalink USB Audio Codec for ham radio connection
1 x 160 GB, 1 x 330 GB, 1 x 400 GB IDE drives
4 x 250 GB SATA 2
LG HL-DT-ST GGW-H20L BD-RE drive
22" Acer P223W monitor
EMC 7.5 on Windows XP 32 SP3
EMC10 on Windows XP64 SP2
Creator 2011 on Windows 7 Ultimate
ECD6 on Gentoo Linux (running under VMWare)
"Rincewind could scream for mercy in nineteen languages and just scream in another forty-four "
"If computers get too powerful, we can organize them into a committee; that will do them in."
“Computers have enabled people to make more mistakes faster than almost any invention in history, with the possible exception of tequila and hand guns.” — Mitch Ratcliffe
Daithi
Home Brew computer
Intel I7 950 on Gigabyte X58A UD3R mobo
12 GB Three Channel DDRAM
Radeon HD4850 512 MB GDR3 graphics
Signalink USB Audio Codec for ham radio connection
1 x 160 GB, 1 x 330 GB, 1 x 400 GB IDE drives
4 x 250 GB SATA 2
LG HL-DT-ST GGW-H20L BD-RE drive
22" Acer P223W monitor
EMC 7.5 on Windows XP 32 SP3
EMC10 on Windows XP64 SP2
Creator 2011 on Windows 7 Ultimate
ECD6 on Gentoo Linux (running under VMWare)
#3
- Newbie
-
- Group: Members
- Posts: 1
- Joined: 03-December 07
Posted 03 December 2007 - 08:22 PM
QUOTE (BigDog @ Jan 24 2007, 07:59 AM) <{POST_SNAPBACK}>
I tried to a full installation of Media Creator 8, but during restart, I get a dialog box that says "Drag to Disc could not be started because components necessary to run are missing. Please reinstall Drag to Disc." I've tried to repair the installation, I've tried re-installing, and I've tried the custom installation of Drag to Disc with no luck.
Does anyone have any ideas as to what's going on???
--BigDog
Does anyone have any ideas as to what's going on???
--BigDog
Hello I'm having the same issues with Easy CD Creator 7 version.I never had this error show up before till recently.I've tried reinstalling it several times with no luck.I can't burn any CD's without the drag to disc function.What components are missing that it may be looking for? Please Help ASAP! Thanks WIlliamM
#4
- Digital Guru
-
- Group: Digital Guru
- Posts: 16,915
- Joined: 10-February 06
- Gender:Male
- Location:Belfast, Ireland
Posted 03 December 2007 - 11:50 PM
Yopu just posted to a thread almost a year old where the OP never answered any questions
In your case - did you install IE7 or Media Player 11?
In your case - did you install IE7 or Media Player 11?
If it ain't broke, fiddle with it until it breaks, then fiddle with it until you get it fixed
"Rincewind could scream for mercy in nineteen languages and just scream in another forty-four "
"If computers get too powerful, we can organize them into a committee; that will do them in."
“Computers have enabled people to make more mistakes faster than almost any invention in history, with the possible exception of tequila and hand guns.” — Mitch Ratcliffe
Daithi
Home Brew computer
Intel I7 950 on Gigabyte X58A UD3R mobo
12 GB Three Channel DDRAM
Radeon HD4850 512 MB GDR3 graphics
Signalink USB Audio Codec for ham radio connection
1 x 160 GB, 1 x 330 GB, 1 x 400 GB IDE drives
4 x 250 GB SATA 2
LG HL-DT-ST GGW-H20L BD-RE drive
22" Acer P223W monitor
EMC 7.5 on Windows XP 32 SP3
EMC10 on Windows XP64 SP2
Creator 2011 on Windows 7 Ultimate
ECD6 on Gentoo Linux (running under VMWare)
"Rincewind could scream for mercy in nineteen languages and just scream in another forty-four "
"If computers get too powerful, we can organize them into a committee; that will do them in."
“Computers have enabled people to make more mistakes faster than almost any invention in history, with the possible exception of tequila and hand guns.” — Mitch Ratcliffe
Daithi
Home Brew computer
Intel I7 950 on Gigabyte X58A UD3R mobo
12 GB Three Channel DDRAM
Radeon HD4850 512 MB GDR3 graphics
Signalink USB Audio Codec for ham radio connection
1 x 160 GB, 1 x 330 GB, 1 x 400 GB IDE drives
4 x 250 GB SATA 2
LG HL-DT-ST GGW-H20L BD-RE drive
22" Acer P223W monitor
EMC 7.5 on Windows XP 32 SP3
EMC10 on Windows XP64 SP2
Creator 2011 on Windows 7 Ultimate
ECD6 on Gentoo Linux (running under VMWare)
#5
- Digital Master
-
- Group: Members
- Posts: 866
- Joined: 04-January 06
Posted 04 December 2007 - 02:48 AM
QUOTE (WilliamM @ Dec 3 2007, 08:22 PM) <{POST_SNAPBACK}>
Hello I'm having the same issues with Easy CD Creator 7 version.I never had this error show up before till recently.I've tried reinstalling it several times with no luck.I can't burn any CD's without the drag to disc function.What components are missing that it may be looking for? Please Help ASAP! Thanks WIlliamM
A CD-R is NOT a "great-big floppy-disc", and does NOT need to be formatted before use. (There is no difference between CD-R and CD-RW in this regard, it's just that you can erase an ENTIRE CD-RW and re-use it - making RW media useful for testing.)
When you format a CD (or DVD) you are using Packet-Writing, which is notorious for losing data. It doesn't matter which program (Drag2Disc, Nero's InCD, Sonic's DLA, etc), altho the different programs are incompatiable with each other and sometimes with different Versions of the same program.
If the idea is to backup your data for the long term, you should be using Creator Classic. If he idea is a "great-big floppy-disc" that you can add and remove things at will, I'd suggest a Flash drive (aka Jump / Thumb / Keychain / Pen drive).
Or, you can wait until the day you find the data on your Packet-Writing discs has disappeared and then come back to discuss it.
Lynn
#6
- Digital Guru
- Group: Digital Guru
- Posts: -8,384,433
- Joined: 04-January 06
- Gender:Male
- Location:Christchurch, N.Z.
Posted 11 December 2007 - 02:23 AM
Lyn, I know you've seen your target phrase "drag to disc", but before you go into your ob. rant, please read the member's question.
In other words he is having trouble burning with Creator Classic. He is not trying to burn with the drag-to-disc function.
Now that you have read his question properly, and since you are posting in this area you must have experience in using this software, can you help him?
Brendon
QUOTE
I can't burn any CD's without the drag to disc function.
In other words he is having trouble burning with Creator Classic. He is not trying to burn with the drag-to-disc function.
Now that you have read his question properly, and since you are posting in this area you must have experience in using this software, can you help him?
Brendon
P4 @3.20GHz on Albatron PX-865PE Pro II with 2GB DDR-SDRAM, FX5900XT video, Viewsonic monitors,
BENQ DW1640, in XP Pro and Windows 7
I blame it all on Global Warming / Global Cooling / Global Staying the Same [pick one]
BENQ DW1640, in XP Pro and Windows 7
I blame it all on Global Warming / Global Cooling / Global Staying the Same [pick one]
#7
- Digital Master
-
- Group: Members
- Posts: 866
- Joined: 04-January 06
Posted 11 December 2007 - 04:40 AM
Clearly there are two ways to read 'without' in this case.
However, the 2nd OP hasn't been back for over a week.
Lynn
However, the 2nd OP hasn't been back for over a week.
Lynn
#8
- Digital Guru
- Group: Digital Guru
- Posts: -8,384,433
- Joined: 04-January 06
- Gender:Male
- Location:Christchurch, N.Z.
Posted 11 December 2007 - 10:44 PM
I'm not surprised! 
P4 @3.20GHz on Albatron PX-865PE Pro II with 2GB DDR-SDRAM, FX5900XT video, Viewsonic monitors,
BENQ DW1640, in XP Pro and Windows 7
I blame it all on Global Warming / Global Cooling / Global Staying the Same [pick one]
BENQ DW1640, in XP Pro and Windows 7
I blame it all on Global Warming / Global Cooling / Global Staying the Same [pick one]
Share this topic:
Page 1 of 1