I have toast 7.0.2, Mac OS X 10.4.4 and i use a lite-on DVDRW SOHW-1633S. I used to burn verbatim DVD-R 4x and 8x without problem, but since i can only find 16x DVD-R Verbatim, i can no longuer burn dvd. All it does is filling the cache ram, burn lead-in then lead-out et i get error message... The disk was not burned at all. Anyone has an idea of the problem?
0
Lead-in, Lead-out, No Burn...
Started by
bakaruku
, Feb 12 2006 05:17 PM
4 replies to this topic
#2
lakewoodlawnman
-
- Members
-
- 240 posts
Digital Master
Posted 12 February 2006 - 05:46 PM
I would say your drive doesn't support 16x burning. I would try Taiyo Yuden with low burn speed like the 4x or 8x you did with Verbatim.
#3
tsantee
-
- Members
-
- 11,024 posts
Digital Guru
Posted 12 February 2006 - 05:54 PM
It's likely you need to update the drive's firmware to work with the newer media. There is a firmware update listed here for your drive, but it requires flashing with the drive connected to a PC.
I'm just a fellow Toast-user so please don't blame Roxio for any misguidance I may provide. And do let me know if your issue gets solved. Cheers from Eugene, Oregon!
#4
bakaruku
-
- Members
-
- 3 posts
Newbie
Posted 13 February 2006 - 10:19 AM
Even if i have 16x disc, i woudn't burn faster then 6x (too much failure). I would stick to 4x or 8x media if i could but i only find 16x dvd-r in stores anyway.
Thanks for the link! I'll upgrade the firmware tonight. Hope this will works.
Thanks for the link! I'll upgrade the firmware tonight. Hope this will works.
#5
bakaruku
-
- Members
-
- 3 posts
Newbie
Posted 13 February 2006 - 02:48 PM
IT'S ALIVE!! IT'S ALIVE! IT'S ALIVE!
Updating the firmware did it!! Thanks again for the link.
Updating the firmware did it!! Thanks again for the link.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
