I imported videos ranging from 1:10 to 1:45 in length using Media Import. Then, using both DVD Express and MyDVD, burned them to disc. I used both "Fit to Disc" and "Best" setting the Mbs so it would fit. The disc drive is set to write at 4X. (I also added memory so I have 1024MB on Windows XP (SP2), but that didn't seem to help.) When viewing the discs, any fast movement or panning up/down, right/left or in any direction results in "jittery" motion. It's as though its trying to catch up with itself, that is, the movement is not smooth. When I view the video through Media Player, they seem OK with little or none of this effect. But, when the disc is viewed, it is quite obvious.
Any recommendations will be really appreciated.
Video to DVD
Started by
hickory
, May 18 2007 09:25 AM
3 replies to this topic
#1
Posted 18 May 2007 - 09:25 AM
#2
Posted 18 May 2007 - 09:38 AM
QUOTE (hickory @ May 18 2007, 12:25 PM) <{POST_SNAPBACK}>
I imported videos ranging from 1:10 to 1:45 in length using Media Import. Then, using both DVD Express and MyDVD, burned them to disc. I used both "Fit to Disc" and "Best" setting the Mbs so it would fit. The disc drive is set to write at 4X. (I also added memory so I have 1024MB on Windows XP (SP2), but that didn't seem to help.) When viewing the discs, any fast movement or panning up/down, right/left or in any direction results in "jittery" motion. It's as though its trying to catch up with itself, that is, the movement is not smooth. When I view the video through Media Player, they seem OK with little or none of this effect. But, when the disc is viewed, it is quite obvious.
Any recommendations will be really appreciated.
Any recommendations will be really appreciated.
See if the info in this post helps you with your problem.
Paul
------
Katrina survivor, current BP survivor
Custom Built ASUS M4A79T Deluxe - AMD X4-955-Corsair XMS3 8GB DDR3 Memory-XFX HD-487A-ZHFC Radeon HD 4870 1GB Vid card - Sony & Pioneer DVD Drives-HAF922 Case-1 WD 1TB, 1 Seagate 1TB and 1 Rack Drive-HVR 2250 & HDHomerun Tuners- Creative Soundblaster X-Fi Titanium- Acer H233H monitor-1 ATI DCT-W7 X64 Ultimate
#2-M4A79XTD EVO-AMD X4-925-4GB Corsair Ballistix Tracer DDR3 1600-Antec 750 PSU-Sony DVD/RW-2-1TB HD's- Zalman CNPS9700 LED heatsink-InfiniTV 4 in a Coolermaster 690 II case-W7 x64 Ultimate
------
Katrina survivor, current BP survivor
Custom Built ASUS M4A79T Deluxe - AMD X4-955-Corsair XMS3 8GB DDR3 Memory-XFX HD-487A-ZHFC Radeon HD 4870 1GB Vid card - Sony & Pioneer DVD Drives-HAF922 Case-1 WD 1TB, 1 Seagate 1TB and 1 Rack Drive-HVR 2250 & HDHomerun Tuners- Creative Soundblaster X-Fi Titanium- Acer H233H monitor-1 ATI DCT-W7 X64 Ultimate
#2-M4A79XTD EVO-AMD X4-925-4GB Corsair Ballistix Tracer DDR3 1600-Antec 750 PSU-Sony DVD/RW-2-1TB HD's- Zalman CNPS9700 LED heatsink-InfiniTV 4 in a Coolermaster 690 II case-W7 x64 Ultimate
#3
Posted 18 May 2007 - 11:53 AM
QUOTE (hickory @ May 18 2007, 09:25 AM) <{POST_SNAPBACK}>
I imported videos ranging from 1:10 to 1:45 in length using Media Import. Then, using both DVD Express and MyDVD, burned them to disc. I used both "Fit to Disc" and "Best" setting the Mbs so it would fit. The disc drive is set to write at 4X. (I also added memory so I have 1024MB on Windows XP (SP2), but that didn't seem to help.) When viewing the discs, any fast movement or panning up/down, right/left or in any direction results in "jittery" motion. It's as though its trying to catch up with itself, that is, the movement is not smooth. When I view the video through Media Player, they seem OK with little or none of this effect. But, when the disc is viewed, it is quite obvious.
Any recommendations will be really appreciated.
Any recommendations will be really appreciated.
Thanks, but my problem is not "jagged" edges. Rather, it's as though frames were "missed". That is, when panning or in motion, what is seen is like a "view", then the next "view" is like a fraction of a second later with no intermediate motion. I know I'm not being clear. Maybe it's best said this way. If you raise your arm, one "frame" (not the right word) shows it at one point, but the next "frame" shows it a couple of inches higher, almost like still photographs with a second between.
#4
Posted 20 May 2007 - 08:27 PM
QUOTE (hickory @ May 18 2007, 03:53 PM) <{POST_SNAPBACK}>
Thanks, but my problem is not "jagged" edges. Rather, it's as though frames were "missed". That is, when panning or in motion, what is seen is like a "view", then the next "view" is like a fraction of a second later with no intermediate motion. I know I'm not being clear. Maybe it's best said this way. If you raise your arm, one "frame" (not the right word) shows it at one point, but the next "frame" shows it a couple of inches higher, almost like still photographs with a second between.
Try this; instead of using "fit to Disc" select "save to image file" (uncheck the burn to disc option and ignore the Warning message) to create an image file (iso). Remember the name and folder of where the file is stored. Then use DiscCOpier to burn that iso file to a DVD. A standard 4.7GB DVD will only hold 60 minutes of video at best quality. Since you have more then 60 minutes at best quality it has to be compressed and many of us have found that "Fit to disc" does a poor job while the iso/DiscCopier ,ethod seems to give a better result.
Walt
Dell Dimension 4500S;Windows XP Home Edition SP3; IntelŪ PentiumŪ 4 CPU 2.00GHz, 784MB RAM
(NVIDIA GeForce FX 5200, 128 MB memory disabled because of failure)
IntelŪ 82845G/GL/GE/PE/GV Graphics Controller; DirectX 9.0c (4.09.0000.0904)
SoundMAX Digital Audio
SamsunG CDR/DVD-ROm SM 332B
HLDS GSA-5120D External LG Super-Multi ReWriter
WDC WD400BB-75DEA0, 40 GB HD; Prolific PL3507 Combo External Hard Drive, 80 GB; Maxtor 6 L200R0 USB Hard Drive, 250GB
HP Pavilion dv6 Notebook; Intel Duo CPU 64 bit, T6400 @ 2.0Ghz; 4.0 GB RAM; Vista Home Premium 64bit
Toshiba MK3252GSX ATA 286GB hard drive; HL-DT-ST DVDRAM GSA-T50L ATA burner
Intel 4Series Express Chipset
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users






