[Shadow T. H.]

Hello. I'm russian. I speak on english is no good.

I buy a recorder LG GCC-4520B. I do install Roxio Easy Media Creator 7 on my computer after. Program installed successfully, but I have a problems with CD recording in Creator Classic. After recording data on CD, Creator Classic don't close session (or disc). And sometimes after recording CD my operating system say that this CD is empty. Please, help me.

Thank you beforehand.

[james_hardin]

I am assuming that you are using Creator Classic and not Drag to Disc.

Even with the disc left open, it should be readable in any PC.

In anycase, after you click Burn, there is a checkbox in Record Methods for Read Only. Place a checkmark there and the disc will be finalized.

Attached image(s)

• 

[Shadow T. H.]

I am assuming that you are using Creator Classic and not Drag to Disc.

Even with the disc left open, it should be readable in any PC.

In anycase, after you click Burn, there is a checkbox in Record Methods for Read Only. Place a checkmark there and the disc will be finalized.

I try set and clean Read-Only Disc check box, but it doesn't help me.

Recording process containing:
1. Writing TOC
2. Writing user tracks
3. Closing session or disc

Third step of recording is not available when I write a CD's. Setting of Read-Only Disc check box don't influence on my problem. When recording is finished, disc is empty. I use Creator Classic and not Drag-To-Disc.

[grandpabruce]

I try set and clean Read-Only Disc check box, but it doesn't help me.

Recording process containing:
1. Writing TOC
2. Writing user tracks
3. Closing session or disc

Third step of recording is not available when I write a CD's. Setting of Read-Only Disc check box don't influence on my problem. When recording is finished, disc is empty. I use Creator Classic and not Drag-To-Disc.

Do you have Internet Explorer 7 (IE 7) and/or Windows Media Player 11 (WMP 11) installed? Both of them break EMC 7.

[Shadow T. H.]

Do you have Internet Explorer 7 (IE 7) and/or Windows Media Player 11 (WMP 11) installed? Both of them break EMC 7.

No, IE7 and WMP11 are not available on my computer. I try to install Roxio EMC 7 in Windows 2000, but it doesn't help me.

[james_hardin]

OK it is time to list your PC specs like GPB and I have listed in our signatures.

Likewise do you have any other burning software installed.

[grandpabruce]

No, IE7 and WMP11 are not available on my computer. I try to install Roxio EMC 7 in Windows 2000, but it doesn't help me.

Do you have SP4, for Windows 2000, installed. It is one of the requirements.

[Shadow T. H.]

Read the users manual(usually on the installation disc)or the help files in the program that you are using.

Next message content cyrillic symbols. Set cyrillic support on your Internet Browser for read this message.

Люди, есть кто-нибудь на этом сайте, знающие русский язык? Если есть, то помогите мне. У меня рекордер LG GCC-4520B. Он не пишет данные на диски через Creator Classic. Вернее, пишет, но с ошибкой: при записи диска она не выполняет финализирование сессии, в результате сессия остаётся незакрытой. На CD-R дисках сессию можно закрыть вручную, а на CD-RW - нет: программа говорит, что диск пуст. Я уже сайтов 10 облазил и нигде не могут помочь.

Заранее благодарен.

[lynn98109]

Next message content cyrillic symbols. Set cyrillic support on your Internet Browser for read this message.

Люди, есть кто-нибудь на этом сайте, знающие русский язык? Если есть, то помогите мне. У меня рекордер LG GCC-4520B. Он не пишет данные на диски через Creator Classic. Вернее, пишет, но с ошибкой: при записи диска она не выполняет финализирование сессии, в результате сессия остаётся незакрытой. На CD-R дисках сессию можно закрыть вручную, а на CD-RW - нет: программа говорит, что диск пуст. Я уже сайтов 10 облазил и нигде не могут помочь.

Заранее благодарен.

Courtesy of goolgle's translation service:

People have someone on the site who know the Russian language? If so, help me. I recorder LG GCC-4520B. He writes data to disk via Creator Classic. Well, says, but with a mistake : when you drive it is not fulfilling finalizirovanie session, the session is exposed. The session CD-R disk can be closed manually, and the CD-RW is not : program said that the disk is empty. I have 10 sites oblazil and nowhere can help. We are grateful.

As commented above, what are the specifications of your computer?

It is not considered polite to hijack someone else's thread instead of adding to your own - but did you notice the suggestion to
Read the users manual(usually on the installation disc)or the help files in the program that you are using. ?

And if you want to KEEP the data, NEVER use RW media. I lost the 80% of the data that wasn't also on the Hard Drive when the RW blanked out. RW is for TEMPORARY use only, when the original is still safe on the originating compuer.

Lynn

This post has been edited by lynn98109: 24 May 2007 - 04:55 AM

[Shadow T. H.]

Courtesy of goolgle's translation service:

As commented above, what are the specifications of your computer?

It is not considered polite to hijack someone else's thread instead of adding to your own - but did you notice the suggestion to
Read the users manual(usually on the installation disc)or the help files in the program that you are using. ?

And if you want to KEEP the data, NEVER use RW media. I lost the 80% of the data that wasn't also on the Hard Drive when the RW blanked out. RW is for TEMPORARY use only, when the original is still safe on the originating compuer.

Lynn

I'm Russian. I speak on english very bad. I have a problem with Roxio Creator Classic 7 (or 7.5). I have the recorder Hitachi-LG Data Storage GCC-4520B. When I write data on disc with Roxio Creator Classic 7, Creator Classic say that disc recorded successful. But I try to read this disc, program say that this disc is empty. When I write Audio CD this problem is not available.

Recording on disc contents:
Step 1: Writing a TOC.
Step 2: Writing a User Tracks.
Step 3: Closing session (or disc).

3rd step is not available when I write data on disc. How decide of this problem? Please, help me.

I search the answer in 10 sites, but I don't find it.

P.S: Sorry for my "weak" english.

[gi7omy]

Try this

instead of burning directly to the CD, choose to make an 'image (.iso) file on the hard drive

insert blank disc and open the .iso file with disc copier

see if that works

ps - your English is a lot better than my Russian

[Shadow T. H.]

Try this

instead of burning directly to the CD, choose to make an 'image (.iso) file on the hard drive

insert blank disc and open the .iso file with disc copier

see if that works

ps - your English is a lot better than my Russian

Thank you, but how I'll burn a multisession discs? If I will write a discs with Disc Copier then I can't add data to discs.

[ml]

Thank you, but how I'll burn a multisession discs? If I will write a discs with Disc Copier then I can't add data to discs.

If you want to add data to discs, do not close the disk.

When you want to add files to a CD in Creator Classic, you may need to 'import' (icon near Burn disc) the files from the CD so that you do not get the CD is empty message.

Can you see the files on the CD using Windows Explorer?

Have you tried visiting the LG website to see if there are any firmware or software updates available for the burner? Sometimes manufacturers issue updates to solve burning problems.

[Shadow T. H.]

If you want to add data to discs, do not close the disk.

When you want to add files to a CD in Creator Classic, you may need to 'import' (icon near Burn disc) the files from the CD so that you do not get the CD is empty message.

Can you see the files on the CD using Windows Explorer?

Have you tried visiting the LG website to see if there are any firmware or software updates available for the burner? Sometimes manufacturers issue updates to solve burning problems.

Driver updates on LG web site are not available.

[Shadow T. H.]

I've installed Roxio EMC 8. Now, I have not problems with burning a discs.

[james_hardin]

Life is good???

[Brendon]

Life is always good!! Ask Grandpa Bruce.