Jump to content

Roxio Community

Writing to DVD


  • Please log in to reply
5 replies to this topic

#1 hrbob

hrbob

    Newbie

  • Members
  • Pip
  • 3 posts

Posted 03 June 2007 - 11:12 AM

I'm new to ROXIO, so please bear with me.  I have a movie image on my hard drive which I'm trying to burn to a blank dvd, but get the following message:

I tried Roxio kept ejecting my blank DVD+R disks and asking...

"Please insert a blank or rewritable CD into the HL-DT-ST DVDRW DL (D:) drive
Supported media: CD-R, CD-RW, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD+R DL, DVD RAM"

Lower left section of the "Burn image to disk" window indicated a blank DVD-R disk. After being frustrated with trying a few disks I tried a different set of blank discs, this time -R, with the same result.  I have used both of these before with NERO and they worked fine.  NERO, however, has started to fail when writing to disc, that's why I'm trying ROXIO.  I did not use ROXIO to download the movie to disc, but another vendor.  

Any suggestions?  Thanks

#2 sknis

sknis

    Digital Guru

  • Digital Guru
  • PipPipPipPipPipPip
  • 26,448 posts
  • Gender:Male
  • Location:Hou,Tx

Posted 03 June 2007 - 12:42 PM

QUOTE (hrbob @ Jun 3 2007, 02:12 PM) <{POST_SNAPBACK}>
I'm new to ROXIO, so please bear with me. I have a movie image on my hard drive which I'm trying to burn to a blank dvd, but get the following message:

I tried Roxio kept ejecting my blank DVD+R disks and asking...

"Please insert a blank or rewritable CD into the HL-DT-ST DVDRW DL (D:) drive
Supported media: CD-R, CD-RW, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD+R DL, DVD RAM"

Lower left section of the "Burn image to disk" window indicated a blank DVD-R disk. After being frustrated with trying a few disks I tried a different set of blank discs, this time -R, with the same result. I have used both of these before with NERO and they worked fine. NERO, however, has started to fail when writing to disc, that's why I'm trying ROXIO. I did not use ROXIO to download the movie to disc, but another vendor.

Any suggestions? Thanks

Let's see, Nero won't burn and neither will Roxio.  Hmm, see any similarity. unsure.gif  Different discs.   I'm guessing that your burner is going bad.  Try blowing out the interior  with canned dry air.  Cover your eyes.  If that doesn't work, you can see if you can update the firmware for that drive but I think you should start looking at what is on sale.

Edited by sknis, 03 June 2007 - 12:43 PM.

PC  Windows 7 Ultimate 64bit  
Velocity Micro ProMagix ©HD 60; evga x58 motherboard, Intel i7 @2.93, 12G RAM, 250G SSD,  EVGA Nvidia 560TI superclocked video card, SoundBlaster X-Fi Xtreme audio card, Buffalo external blu-ray burner; Creator 2012, Creator NXT2 Pro. PhotoShow 6, VHS to DVD 3Plus and others.

Laptop - Windows 7 Ultimate 64 bit
Alienware M17XR4.  I-7 third generation @2.4,  8G RAM, 500G SSD, GTX660M, SoundBlaster 3Di,

Apple =OSX 10.5
MacBook Pro; 15.4-inch widescreen display, 2.4GHz Intel Core 2 Duo, 2GB memory, 200GB hard drive, 8x SuperDrive (DVD±R DL/DVD±RW/CD-RW), NVIDIA GeForce 8600M GT with 256MB of GDDR3 memory.  ILife 08, Toast 10, Final Cut Express 4 and Photoshop 4.

#3 hrbob

hrbob

    Newbie

  • Members
  • Pip
  • 3 posts

Posted 03 June 2007 - 02:07 PM

QUOTE (hrbob @ Jun 3 2007, 11:12 AM) <{POST_SNAPBACK}>
I'm new to ROXIO, so please bear with me.  I have a movie image on my hard drive which I'm trying to burn to a blank dvd, but get the following message:

I tried Roxio kept ejecting my blank DVD+R disks and asking...

"Please insert a blank or rewritable CD into the HL-DT-ST DVDRW DL (D:) drive
Supported media: CD-R, CD-RW, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD+R DL, DVD RAM"

Lower left section of the "Burn image to disk" window indicated a blank DVD-R disk. After being frustrated with trying a few disks I tried a different set of blank discs, this time -R, with the same result.  I have used both of these before with NERO and they worked fine.  NERO, however, has started to fail when writing to disc, that's why I'm trying ROXIO.  I did not use ROXIO to download the movie to disc, but another vendor.  

Any suggestions?  Thanks



Yeah, that's where I was headed next, but I wanted to see if anyone had any other thoughts.   Thanks.

#4 tbrewst

tbrewst

    Digital Guru

  • Digital Guru
  • PipPipPipPipPipPip
  • 13,118 posts
  • Gender:Male
  • Location:Taos,NM

Posted 03 June 2007 - 02:11 PM

Try using Disc Copier from the Start menu instead of "Burn image" from the Home app and see if there's any difference.For the source use Browse and go to your image file.

Edited by tbrewst, 03 June 2007 - 02:12 PM.

RIP Johnny Winter


Terry

64 bitWindows 8.1 OS
AMD FX-8320 8 core 3.5Ghz processor with Arctic Freezer 64 Pro cooling fan
Gigabyte GA-970A-DS3 AM3+ motherboard
Galaxy  GeForce GTX 550 Ti video card with 1Gb memory
8Gb G Skill Ripjaws Series DDR3 1600 RAM
120GB OCZ Vertex 3 SSD drive
1Tb Hitachi SATA hard drive
LG WH14NS40 Blu-Ray drive
Lite-On iHAS224-06 SATA DVD drive
Rosewill Destroyer case
Cambridge Soundworks THX 5.1 speaker system
Onboard Realtek HD audio
I-inc iH-252HPB 25" widescreen monitor connected via HDMI
Samsung 2525W Laser Printer

#5 hrbob

hrbob

    Newbie

  • Members
  • Pip
  • 3 posts

Posted 03 June 2007 - 02:46 PM

QUOTE (tbrewst @ Jun 3 2007, 02:11 PM) <{POST_SNAPBACK}>
Try using Disc Copier from the Start menu instead of "Burn image" from the Home app and see if there's any difference.For the source use Browse and go to your image file.



Received the following message:

Invalid field in cdb, illegal request 5/24/00
sense key = 0x05
ASC = 0x24
ASCQ = 0x00
ULONG:  error number:  15240001
STRING:  error string = invalid field in cdb: illegal request

#6 cdanteek

cdanteek

    Digital Guru

  • Digital Guru
  • PipPipPipPipPipPip
  • 25,066 posts
  • Gender:Male
  • Location:Prairie Rapids Crossing.

Posted 03 June 2007 - 03:21 PM

atapi_error_codes_page

http://www.cdr-zone.com/articles/atapi_err...des_page_1.html

cd
cd
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
My Computer Specs click show.
Spoiler

1.Click here   Beginners Guide - Blank DVD Media Type Definitions & What A Firmware Upgrade Is for Your Burner.
2.Click here Firmware HQ - site  dedicated to providing you with the latest firmware releases for your optical disc drives.  
3.Click here CD-DVD Speed
4.Click here CD-DVD Speed - A user guide
5.Click here Enabling/Checking DMA in Windows Vista, XP, 2000, Me, 9x.
6.Click hereYou can no longer access the CD drive or the DVD drive.
7.Click here Drive Not Recognized By Roxio, PX Engine 3_00_58a. Old Version<-> EMC 7.5 Up  PX Engine 4.18.16a. Update .Click here  PX Engine Fix, Click here The Latest 4.10.28a Click here
8.Click here  How to uninstall IE 7 and WMP 11.
9.Click here ImgBurn Current version: v2.5.8.0 (3,389 KB)  CD / DVD / HD DVD / Blu-ray burning application
10.Click here InfoTool  (Drive, Disk, Configuration, Software, Hardware, DMA settings, etc.).
11.Click here   Complete Uninstall of Creator 2011 & Creator 2012
12.Click here Complete Uninstall of Creator 2009 and 2010 (Windows Vista and 7)
13.Click here Complete Uninstall of Creator 2009 and 2010 (Windows XP)
14.Click here Complete Uninstall of Easy Media Creator 9 & 10 on Windows Vista  
15.Click here Complete Uninstall of Easy Media Creator 7.5,  8, 9, & 10 on Windows XP
16. Click here WinZip Data Compression Utility <>  Click here WinRAR Data Compression Utility   Click here 7-Zip Data Compression Utility
17. Click here Finding Your Computer Specs And Roxio Software Version Number.

E-mail spambots harvest e-mail addresses from material found on the Internet in order to build mailing lists for sending unsolicited e-mail, also known as spam. Such spambots are web crawlers that can gather e-mail addresses from Web sites, newsgroups, special-interest group (SIG) postings, and chat-room conversations. .

Do not post your email address on any public forum!  




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users