Help
Roxio Community
once it is done compressing video ts folder
i get this message
THis drive reported an error:
Sense Key =BLANK CHECK
Sense Key =0x00
NO ADDITIONAL SENSE INFORMATION
Then a notice that says disc has failed to write.
any help would be greatly appreciated
KennyMac
Page 1 of 1
Error at end of compression DVD burn failure
#2
- Digital Master
-
- Group: Members
- Posts: 240
- Joined: 07-January 06
Posted 27 August 2007 - 07:10 PM
It's a media issue. What media are you using? I suggest Taiyo Yuden or Verbatim.
Is there updated firmware for your drive?
Is there updated firmware for your drive?
This post has been edited by lakewoodlawnman: 27 August 2007 - 07:12 PM
#3
- Digital Guru
-
- Group: Members
- Posts: 10,709
- Joined: 04-January 06
Posted 27 August 2007 - 07:23 PM
This is one of the reasons I do the compression and the burning as two separate steps. Choose Save as Disc Image to have Popcorn compress the video to fit a single-layer disc. Then select the disc image using the Image File setting to burn the disc. This sometimes prevents disc-burning errors as well. But even if this is a media issue at least you don't have to wait for the compression to be completed again when attempting to burn to a different brand of media.
I'm just a fellow Toast-user so please don't blame Roxio for any misguidance I may provide. And do let me know if your issue gets solved. Cheers from Eugene, Oregon!
#4
- Newbie
-
- Group: Members
- Posts: 3
- Joined: 27-August 07
Posted 27 August 2007 - 07:46 PM
Maxell
DVD-R
i have been using it all along without a hitch until now
DVD-R
i have been using it all along without a hitch until now
#5
- Newbie
-
- Group: Members
- Posts: 3
- Joined: 27-August 07
Posted 27 August 2007 - 08:20 PM
I happened to have a couple maxell dvd's leftover from a previous purchase. White backed ones for labeling.
And it seems to be working. Keeping fingers crossed. I also went thru the process as u described and so far so good.
thx
i will report back after done to let u know if it completed the burn and how it looked if it does complete task.
And it seems to be working. Keeping fingers crossed. I also went thru the process as u described and so far so good.
thx
i will report back after done to let u know if it completed the burn and how it looked if it does complete task.
QUOTE (tsantee @ Aug 27 2007, 08:23 PM) <{POST_SNAPBACK}>
This is one of the reasons I do the compression and the burning as two separate steps. Choose Save as Disc Image to have Popcorn compress the video to fit a single-layer disc. Then select the disc image using the Image File setting to burn the disc. This sometimes prevents disc-burning errors as well. But even if this is a media issue at least you don't have to wait for the compression to be completed again when attempting to burn to a different brand of media.
#6
- Digital Master
-
- Group: Members
- Posts: 240
- Joined: 07-January 06
Posted 28 August 2007 - 05:52 AM
QUOTE (KennyMac @ Aug 28 2007, 12:20 AM) <{POST_SNAPBACK}>
I happened to have a couple maxell dvd's leftover from a previous purchase. White backed ones for labeling.
And it seems to be working. Keeping fingers crossed.
And it seems to be working. Keeping fingers crossed.
This is why I suggest good quality media that is more consistent from one disc to another in the same spindle and from one spindle to another.
Share this topic:
Page 1 of 1