Old Computer but oh well here it is
athlon xp 2200+ 1gig ram 9800 ati vid BENQ dvd burner.
Ok I thought I may of had a power problem so I bought a new power supply 500 watt should do it NOOT! had 300watt. What happens is when draging files to burn on a DVD mostly larger amounts of files at one time causes computer to restart without a warning. I also checked for over heating problems and are not haveing problems there. It is eaither drag to disk or may be a vid card problem. When I sent in the crash report to MS it says I have a driver problem. any ideas. oh yea I installed the lastest vid card driver.
John
1
Drag to disk crash windows shuts down
Started by
johnfowler
, Sep 02 2007 05:59 PM
4 replies to this topic
#2
grandpabruce
-
- Digital Guru
-
- 19,446 posts
Digital Guru
- Gender:Male
Posted 02 September 2007 - 06:43 PM
QUOTE (johnfowler @ Sep 2 2007, 08:59 PM) <{POST_SNAPBACK}>
Old Computer but oh well here it is
athlon xp 2200+ 1gig ram 9800 ati vid BENQ dvd burner.
Ok I thought I may of had a power problem so I bought a new power supply 500 watt should do it NOOT! had 300watt. What happens is when draging files to burn on a DVD mostly larger amounts of files at one time causes computer to restart without a warning. I also checked for over heating problems and are not haveing problems there. It is eaither drag to disk or may be a vid card problem. When I sent in the crash report to MS it says I have a driver problem. any ideas. oh yea I installed the lastest vid card driver.
John
athlon xp 2200+ 1gig ram 9800 ati vid BENQ dvd burner.
Ok I thought I may of had a power problem so I bought a new power supply 500 watt should do it NOOT! had 300watt. What happens is when draging files to burn on a DVD mostly larger amounts of files at one time causes computer to restart without a warning. I also checked for over heating problems and are not haveing problems there. It is eaither drag to disk or may be a vid card problem. When I sent in the crash report to MS it says I have a driver problem. any ideas. oh yea I installed the lastest vid card driver.
John
I could be a lousy power supply, bad RAM, your 9800 going belly up, or a heatsink/fan stopping.
What power supply did you get. If it is a cheap no name power supply, you run the risk of frying components on your motherboard.
Life is good!
GrandpaBruce
Vietnam Vet - 1970 - 1971
Main System:
ASUS P6T Deluxe V2 LGA 1366 Intel X58 ATX Intel Motherboard; Cooler Master ATCS 840 Case
Intel Core i7 920 Nehalem 2.66GHz 4 x 256KB L2 Cache 8MB L3 Cache LGA 1366 130W Quad-Core Processor
CORSAIR DOMINATOR 3GB (3 x 1GB) 240-Pin DDR3 SDRAM DDR3 1866
PLEXTOR Black DVD Burner, Model PX-880SA; Pioneer Black 8X BD-R 2X BD-RE 16X DVD+R Burner
XFX HD-489A-ZDFC Radeon HD 4890 1GB Video Card
Creative Sound Blaster X-Fi Titanium Fatal1ty Champion Series Sound Card
Windows XP Pro w/SP3
Backup Computer:
ASUS A8N32-SLI Deluxe
Windows 7 Pro w/SP1
GrandpaBruce
Vietnam Vet - 1970 - 1971
Main System:
ASUS P6T Deluxe V2 LGA 1366 Intel X58 ATX Intel Motherboard; Cooler Master ATCS 840 Case
Intel Core i7 920 Nehalem 2.66GHz 4 x 256KB L2 Cache 8MB L3 Cache LGA 1366 130W Quad-Core Processor
CORSAIR DOMINATOR 3GB (3 x 1GB) 240-Pin DDR3 SDRAM DDR3 1866
PLEXTOR Black DVD Burner, Model PX-880SA; Pioneer Black 8X BD-R 2X BD-RE 16X DVD+R Burner
XFX HD-489A-ZDFC Radeon HD 4890 1GB Video Card
Creative Sound Blaster X-Fi Titanium Fatal1ty Champion Series Sound Card
Windows XP Pro w/SP3
Backup Computer:
ASUS A8N32-SLI Deluxe
Windows 7 Pro w/SP1
#3
james_hardin
-
- Digital Guru
-
- 10,000 posts
Digital Guru
- Gender:Male
Posted 03 September 2007 - 02:39 AM
D2D is a packet writer and will eventually result in lose of data…
Give it a try using Classic and see what happens.
Give it a try using Classic and see what happens.
Dell 8300 3.0ghz 1.5gb RAM 300gb & 200gb HDs
XP Pro/SP2
NVIDIA GeForce4 MX 440 w/AGP8X
XP Pro/SP2
NVIDIA GeForce4 MX 440 w/AGP8X
#4
gi7omy
-
- Digital Guru
-
- 16,976 posts
Digital Guru
- Gender:Male
- Location:Belfast, Ireland
Posted 03 September 2007 - 04:00 AM
I'd tend to agree with Brendon - in the short term, try going into BIOS and reducing the Front Side Bus speed (your 2200 will run slower, but the RAM won't be as stressed out).
I actually had that problem on a 2200 and that 'fixed' it until I fitted new RAM.
It probably isn't all your RAM btw - maybe one stick is lower rated than the others. The only way to check that is to remove one stick at a time and see if it still does the restart (with the FSB at the original speed) - if it doesn't, that's the faulty stick
I actually had that problem on a 2200 and that 'fixed' it until I fitted new RAM.
It probably isn't all your RAM btw - maybe one stick is lower rated than the others. The only way to check that is to remove one stick at a time and see if it still does the restart (with the FSB at the original speed) - if it doesn't, that's the faulty stick
If it ain't broke, fiddle with it until it breaks, then fiddle with it until you get it fixed
"Rincewind could scream for mercy in nineteen languages and just scream in another forty-four "
"If computers get too powerful, we can organize them into a committee; that will do them in."
“Computers have enabled people to make more mistakes faster than almost any invention in history, with the possible exception of tequila and hand guns.” — Mitch Ratcliffe
Daithi
Home Brew computer
Intel I7 950 on Gigabyte X58A UD3R mobo
12 GB Three Channel DDRAM
Radeon HD4850 512 MB GDR3 graphics
Signalink USB Audio Codec for ham radio connection
1 x 160 GB, 1 x 330 GB, 1 x 400 GB IDE drives
4 x 250 GB SATA 2
LG HL-DT-ST GGW-H20L BD-RE drive
22" Acer P223W monitor
EMC 7.5 on Windows XP 32 SP3
EMC10 on Windows XP64 SP2
Creator 2011 on Windows 7 Ultimate
ECD6 on Gentoo Linux (running under VMWare)
"Rincewind could scream for mercy in nineteen languages and just scream in another forty-four "
"If computers get too powerful, we can organize them into a committee; that will do them in."
“Computers have enabled people to make more mistakes faster than almost any invention in history, with the possible exception of tequila and hand guns.” — Mitch Ratcliffe
Daithi
Home Brew computer
Intel I7 950 on Gigabyte X58A UD3R mobo
12 GB Three Channel DDRAM
Radeon HD4850 512 MB GDR3 graphics
Signalink USB Audio Codec for ham radio connection
1 x 160 GB, 1 x 330 GB, 1 x 400 GB IDE drives
4 x 250 GB SATA 2
LG HL-DT-ST GGW-H20L BD-RE drive
22" Acer P223W monitor
EMC 7.5 on Windows XP 32 SP3
EMC10 on Windows XP64 SP2
Creator 2011 on Windows 7 Ultimate
ECD6 on Gentoo Linux (running under VMWare)
#5
Big_Dave
-
- Members
-
- 1,451 posts
Digital Master
Posted 03 September 2007 - 07:52 AM
If you do go into the bios, you might want to select "fast boot off". This results in a better memory check from what I can remember of this setting.
VISTA Home Premium +SP2 32 bit, Windows 7 Home Premium 32 bit sp1 and 64 bit sp1, XP Pro --->multiboot
Creator 2012 Pro + Creator 2011 Blu-ray plugin
DIY Asus P8P67, Intel i7-2600k 4.4 OC'd ghz, Corsair 8gb XMS3 DDR3 1600, NVIDIA 550 TI 1gb, OCZ Vertex 3 120 gb SATA III, dual Hitachi 1.5TB SATA III
HP DV7-4100t Intel i3-M380 2.5 ghz, 4gb, Crucial C300 128 gb SSD
HP DV9700T Duo 2 T9300 2.5 ghz, 4gb, GF 8600m GS 512 mb, TS-L632N DVD/CD
HP e9280t i7-960 3.2 ghz, 12gb, GTX 460 1gb, HP BD-RE BH20L, Vertex 3 120GB SSD
HP Photosmart Premium, Sony PS3
Creator 2012 Pro + Creator 2011 Blu-ray plugin
DIY Asus P8P67, Intel i7-2600k 4.4 OC'd ghz, Corsair 8gb XMS3 DDR3 1600, NVIDIA 550 TI 1gb, OCZ Vertex 3 120 gb SATA III, dual Hitachi 1.5TB SATA III
HP DV7-4100t Intel i3-M380 2.5 ghz, 4gb, Crucial C300 128 gb SSD
HP DV9700T Duo 2 T9300 2.5 ghz, 4gb, GF 8600m GS 512 mb, TS-L632N DVD/CD
HP e9280t i7-960 3.2 ghz, 12gb, GTX 460 1gb, HP BD-RE BH20L, Vertex 3 120GB SSD
HP Photosmart Premium, Sony PS3
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
