Help
Roxio Community
I am using EMC9 (Vista) and its accompanying Dazzle DVC90 to TRY to capture videos. Everything APPEARS to be progressing superbly - for about 10-30 sec. Then capture suddenly stops and the "Unknown Error" message asks me to save the video. The saved video is invariably empty (0 sec. / 0 bytes). I've tried a variety of settings/input (broadcast TV, unprotected video, copyrighted DVD, with/without a Signal Stabilizer)... same results every time. I have yet to capture a video. Downloading the "latest" drivers from Pinnacle and Roxio hasn't helped. Has anybody who had similar problems with the DVC90 and EMC9 (Vista) found a real solution yet? Please share!
Page 1 of 1
Spontaneous Shutdown During Capture (EMC9-Vista) Capture from DVC90 aborts after 10-30 seconds
#2
- Digital Guru
-
- Group: Digital Guru
- Posts: 12,325
- Joined: 04-January 06
- Gender:Male
- Location:Taos,NM
Posted 30 September 2007 - 03:36 PM
When you are able to capture are you getting sound and video or just video for those 10-30 sec?
I've seen this happen when people are only getting video and no audio.
I've seen this happen when people are only getting video and no audio.
"Do you wanna see me crawl across the floor to you?
Do you wanna hear me beg you to take me back?
I'd gladly do it because....."
Terry
AMD Athlon II X4 640 3.0Ghz processor
ASUS M4A88T-M/USB3 Motherboard w/VIA 8 channel sound
Power Color ATI HD5550 512mb DDR3 video card
4Gb DDR3 10666 memory
1Tb Hitachi SATA hard drive
(2) Lite-On iHAS224-06 SATA DVD drives
Rosewill Destroyer case
Dell DX-20A6Q QFlix DVD burner
Cambridge Soundworks THX 5.1 speaker system
I-inc iH-252HPB 25" widescreen monitor connected via HDMI
Dell 1100 Laser printer
Roxio USB Capture Device
Windows 7 OS
Do you wanna hear me beg you to take me back?
I'd gladly do it because....."
Terry
AMD Athlon II X4 640 3.0Ghz processor
ASUS M4A88T-M/USB3 Motherboard w/VIA 8 channel sound
Power Color ATI HD5550 512mb DDR3 video card
4Gb DDR3 10666 memory
1Tb Hitachi SATA hard drive
(2) Lite-On iHAS224-06 SATA DVD drives
Rosewill Destroyer case
Dell DX-20A6Q QFlix DVD burner
Cambridge Soundworks THX 5.1 speaker system
I-inc iH-252HPB 25" widescreen monitor connected via HDMI
Dell 1100 Laser printer
Roxio USB Capture Device
Windows 7 OS
#3
- Newbie
-
- Group: Members
- Posts: 2
- Joined: 29-September 07
Posted 01 October 2007 - 04:28 PM
QUOTE (tbrewst @ Sep 30 2007, 04:36 PM) <{POST_SNAPBACK}>
When you are able to capture are you getting sound and video or just video for those 10-30 sec?
I've seen this happen when people are only getting video and no audio.
I've seen this happen when people are only getting video and no audio.
--Thanks for your input! I heard about the people without audio, but I had sound and vision, everything appeared fine while the program appeared to be capturing. But the capture files were 0 bytes and empty. No longer an issue, however. I downloaded version 9.1 and now my Easy Media Creator captures video from the Dazzle as it should have being doing all along. From the posts I just read under the topic "Dazzle," I should consider myself lucky; some folks after downloading EMC 9.1 still aren't having any luck with this!
#4
- Digital Guru
-
- Group: Digital Guru
- Posts: 10,000
- Joined: 04-January 06
- Gender:Male
Posted 03 October 2007 - 05:29 AM
QUOTE (NotDazzled @ Oct 1 2007, 08:28 PM) <{POST_SNAPBACK}>
--Thanks for your input! I heard about the people without audio, but I had sound and vision, everything appeared fine while the program appeared to be capturing. But the capture files were 0 bytes and empty. No longer an issue, however. I downloaded version 9.1 and now my Easy Media Creator captures video from the Dazzle as it should have being doing all along. From the posts I just read under the topic "Dazzle," I should consider myself lucky; some folks after downloading EMC 9.1 still aren't having any luck with this!
There is nothing new in 9.1 but it appears it acted as a Repair and fixed something that was broken…
Dell 8300 3.0ghz 1.5gb RAM 300gb & 200gb HDs
XP Pro/SP2
NVIDIA GeForce4 MX 440 w/AGP8X
XP Pro/SP2
NVIDIA GeForce4 MX 440 w/AGP8X
Share this topic:
Page 1 of 1