I ran thru the clean install for EMC 8 then tried to reinstall it. I get about half way thru the install and it asks for the disk to be inserted. I only have one disk!? The install will not recognize the disk and run to completion. I have installed this system several times before.
Please help.
0
Emc 8 Uninstall/reinstall
Started by
jcahouston
, Feb 21 2008 07:13 PM
3 replies to this topic
#1
jcahouston
-
- Members
-
- 26 posts
Rookie
Posted 21 February 2008 - 07:13 PM
jcahouston
_______________________________________________________________
Windows Vista SP2, Dell XPS400 Intel Dual Core E6600 2.4Ghz processor, 4GB RAM, 320GB hard drive, ATI Radeom x1300 Pro 256 DVIVGA video card
_______________________________________________________________
Windows Vista SP2, Dell XPS400 Intel Dual Core E6600 2.4Ghz processor, 4GB RAM, 320GB hard drive, ATI Radeom x1300 Pro 256 DVIVGA video card
#2
Brendon
-
- Digital Guru
- -8,384,204 posts
Digital Guru
- Gender:Male
- Location:Christchurch, N.Z.
Posted 21 February 2008 - 10:47 PM
If you suspect the disc may have been scratched/smudged, copy it to a folder on your hard drive, and burn from that copy rather than the CD.
P4 @3.20GHz on Albatron PX-865PE Pro II with 2GB DDR-SDRAM, FX5900XT video, Viewsonic monitors,
BENQ DW1640, in XP Pro and Windows 7
I blame it all on Global Warming / Global Cooling / Global Staying the Same [pick one]
BENQ DW1640, in XP Pro and Windows 7
I blame it all on Global Warming / Global Cooling / Global Staying the Same [pick one]
#3
jcahouston
-
- Members
-
- 26 posts
Rookie
Posted 22 February 2008 - 06:32 PM
QUOTE (Brendon @ Feb 21 2008, 10:47 PM) <{POST_SNAPBACK}>
If you suspect the disc may have been scratched/smudged, copy it to a folder on your hard drive, and burn from that copy rather than the CD.
Thank you for the tip. That seems to have worked. The only problem is that I have find the videos, photos and music for the dmsd files and reestablish the links.
If you have any ideas on how I can install EMC 10 coresident with EMC 8 I would appreciate it. The install exe does not give the option, unlike most installers, to chose my own destination folder.
jcahouston
_______________________________________________________________
Windows Vista SP2, Dell XPS400 Intel Dual Core E6600 2.4Ghz processor, 4GB RAM, 320GB hard drive, ATI Radeom x1300 Pro 256 DVIVGA video card
_______________________________________________________________
Windows Vista SP2, Dell XPS400 Intel Dual Core E6600 2.4Ghz processor, 4GB RAM, 320GB hard drive, ATI Radeom x1300 Pro 256 DVIVGA video card
#4
Brendon
-
- Digital Guru
- -8,384,204 posts
Digital Guru
- Gender:Male
- Location:Christchurch, N.Z.
Posted 22 February 2008 - 08:48 PM
I haven't installed EMC 10.0 co-resident with any other version, but quite a few of the gang have.
Asking that question in the EMC 10 'How to' forum should get you a lot of good advice.
I hope it goes well.
Regards,
Brendon
Asking that question in the EMC 10 'How to' forum should get you a lot of good advice.
I hope it goes well.Regards,
Brendon
P4 @3.20GHz on Albatron PX-865PE Pro II with 2GB DDR-SDRAM, FX5900XT video, Viewsonic monitors,
BENQ DW1640, in XP Pro and Windows 7
I blame it all on Global Warming / Global Cooling / Global Staying the Same [pick one]
BENQ DW1640, in XP Pro and Windows 7
I blame it all on Global Warming / Global Cooling / Global Staying the Same [pick one]
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
