Mounting An .iso Image
#1
Posted 22 April 2008 - 11:42 PM
If not what version of EMC has this capability?
I'm running Windows 2000.
Purchased Windows XP last week, but will not install until I build a PC for the critter.
#2
Posted 23 April 2008 - 06:21 AM
It is probable it is also in 7.0 but I can't be certain
"Rincewind could scream for mercy in nineteen languages and just scream in another forty-four "
"If computers get too powerful, we can organize them into a committee; that will do them in."
“Computers have enabled people to make more mistakes faster than almost any invention in history, with the possible exception of tequila and hand guns.” — Mitch Ratcliffe
Daithi
Home Brew computer
Intel I7 950 on Gigabyte X58A UD3R mobo
12 GB Three Channel DDRAM
Radeon HD4850 512 MB GDR3 graphics
Signalink USB Audio Codec for ham radio connection
1 x 160 GB, 1 x 330 GB, 1 x 400 GB IDE drives
4 x 250 GB SATA 2
LG HL-DT-ST GGW-H20L BD-RE drive
22" Acer P223W monitor
EMC 7.5 on Windows XP 32 SP3
EMC10 on Windows XP64 SP2
Creator 2011 on Windows 7 Ultimate
ECD6 on Gentoo Linux (running under VMWare)
#3
Posted 23 April 2008 - 06:39 PM
It is probable it is also in 7.0 but I can't be certain
I don't see it in my v7.
V6, V7v7.5, V8 , v9 ,
Dell Dimension XPS4, Windows XP Prof
PROCESSOR,80547,Pentium 4 Prescott DT,Pentium4 Prescott DT.3.4GHZ.1 MEGB, 800FSB
DUAL IN-LINE MEMORY MODULE, 1G, 533M, 128X64, 8, 240, 2RX8 (4G total Memory)
DIGITAL VIDEO DISK DRIVE, 17G, 16X, I, 5.25" FORM FACTOR, LITEON, CHASSIS 2001, V5
ASSEMBLY, DVD+/-RW, 16X, HALF HEIGHT, NEC 3450 CARD (CIRCUIT), MULTI-MEDIA, AUDIO, 1394,
CARD (CIRCUIT), GRAPHICS, 256, GEFORCE, 6800, HMGA11
FLOPPY DRIVE, 1.44M, 3.5" FORM FACTOR, 3MD, NO BEZEL, SAMSUNG, CHASSIS 2001
HARD DRIVE, 250GB, Serial ATA, 8MB, WD-XL80-2
HARD DRIVE, 74GB, 8MEGB, 10K, Serial ATA, WD-EXPN
HARD DRIVE, 74GB, 8MEGB, 10K, Serial ATA, WD-EXPN
NORTON INTERNET SECURITY, WXPPSP3
Dell Vostro 2510 Laptop
Vista Ultimate- Intel® Core™ 2 Duo T5670 (1.8GHz, 2MB L2 Cache, 800MHz FSB) Vostro 25108X DVD+/-RW with double-layer DVD+/-R write capability, 2GB Shared Dual Channel DDR2 SDRAM at 667MHz, 2 DIMM Memory 250GB2 7200RPM SATA Hard Drive with Free Fall Sensor, Hard Drives 256MB NVIDIA® GeForce™ 8400M GS,
Video Board High Definition Audio 2.0 Sound CardIntegrated 1.3 mega pixel Web Camera and Digital Microphone
Roxio V9.1, 2009, 2010 Pro
XPS 9100..........Windows 7 Ultimate 64..525W, EXTREME PERFORMANCE SYSTEM..., 9100, Assembly, Heatsink, Fan, Mini Tower, KIT...,Processor, I7-920, 2.66, 8MB, Bloomfield, D0, Speaker, 120V, BOSE2, Dell AMERICASORGANIZATION, Card, Wireless, Network, DW1525, Full Height, TUNER..., Television..., TVT9, PLACEMAT..., CARD(CIRCUIT)..., TVT9, NATIONAL TELEVISION SYSTEMS COMMUNICATIONS..., ATSC, Hard Drive, 1.5TB, S2, 7.2K BRINKS-XLOB, HARD DRIVE..., 1TB, S2, 7.2K, WESTERN DIGITAL..., XL500, Kit, Card, Network, Documentation, Antenna, Screw, Assembly, 6-Dual In-line Memory Module, 2G 1333, 128X64, 8, 240, 2RX8, Assembly, Blu-Ray Rewritable, 8X, Half Height, Plds, Card, Graphics, Advanced Micro Devices, 1G, 5670, M206, Assembly, Dvd+/-Rw, 16X, Half Height, BARE, HitachiLg Data Storage, Kit, Software, Roxio, 10.3, Premium, Blu-Ray Disk Playback, Kit, Mouse/keyboard Combo Wireless, AMF, Abnt2
Roxio 2011 Pro
#4
Posted 23 April 2008 - 10:26 PM
It is probable it is also in 7.0 but I can't be certain
I cannot find in 7.
Does the loader actually assign a drive letter to the .iso image?
#5
Posted 24 April 2008 - 12:18 AM
It does allocate a drive letter to the virtual drive
"Rincewind could scream for mercy in nineteen languages and just scream in another forty-four "
"If computers get too powerful, we can organize them into a committee; that will do them in."
“Computers have enabled people to make more mistakes faster than almost any invention in history, with the possible exception of tequila and hand guns.” — Mitch Ratcliffe
Daithi
Home Brew computer
Intel I7 950 on Gigabyte X58A UD3R mobo
12 GB Three Channel DDRAM
Radeon HD4850 512 MB GDR3 graphics
Signalink USB Audio Codec for ham radio connection
1 x 160 GB, 1 x 330 GB, 1 x 400 GB IDE drives
4 x 250 GB SATA 2
LG HL-DT-ST GGW-H20L BD-RE drive
22" Acer P223W monitor
EMC 7.5 on Windows XP 32 SP3
EMC10 on Windows XP64 SP2
Creator 2011 on Windows 7 Ultimate
ECD6 on Gentoo Linux (running under VMWare)
#6
Posted 24 April 2008 - 12:41 AM
It does allocate a drive letter to the virtual drive
Thanx.
#7
Posted 24 April 2008 - 05:24 AM
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
My Computer Specs click show.
1.Click here Beginners Guide - Blank DVD Media Type Definitions & What A Firmware Upgrade Is for Your Burner.
2.Click here Firmware HQ - site dedicated to providing you with the latest firmware releases for your optical disc drives.
3.Click here CD-DVD Speed
4.Click here CD-DVD Speed - A user guide
5.Click here Enabling/Checking DMA in Windows Vista, XP, 2000, Me, 9x.
6.Click hereYou can no longer access the CD drive or the DVD drive.
7.click here Drive Not Recognized By Roxio, PX Engine 3_00_58a. Old Version<-> EMC 7.5 Up PX Engine 4.18.16a. Update .Click here
8.Click here How to uninstall IE 7 and WMP 11.
9.Click here ImgBurn Current version: 2.5.3.0 (5,262 KB) CD / DVD / HD DVD / Blu-ray burning application
10.Click here InfoTool (Drive, Disk, Configuration, Software, Hardware, DMA settings, etc.).
11.Click here. Complete Uninstall of Creator 2011 & Creator 2012
12.Click here. Complete Uninstall of Creator 2009 and 2010 (Windows Vista and 7)
13.Click here Complete Uninstall of Creator 2009 and 2010 (Windows XP)
14.Click here Complete Uninstall of Easy Media Creator 9 & 10 on Windows Vista
15.Click here Complete Uninstall of Easy Media Creator 7.5, 8, 9, & 10 on Windows XP
16. Click here WinZip Data Compression Utility <> Click here WinRAR Data Compression Utility Click here 7-Zip Data Compression Utility
17. Click here Finding Your Computer Specs And Roxio Software Version Number.
#8
Posted 24 April 2008 - 11:02 AM
Thanx
I'm trying to do this without installing additional software.
PC is multiboot.
On another OS on the PC, I habe Nero 6.*, which, I believe can do the deed.
Indeed, when I build my new PC, I'll have to make the choice between Nero 7 and Roxio and ... .
#9
Posted 24 April 2008 - 11:38 AM
9.2mb isn't installing BIG software. Anyway isn't that what one does with a pc, install programs to do things?
cd
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
My Computer Specs click show.
1.Click here Beginners Guide - Blank DVD Media Type Definitions & What A Firmware Upgrade Is for Your Burner.
2.Click here Firmware HQ - site dedicated to providing you with the latest firmware releases for your optical disc drives.
3.Click here CD-DVD Speed
4.Click here CD-DVD Speed - A user guide
5.Click here Enabling/Checking DMA in Windows Vista, XP, 2000, Me, 9x.
6.Click hereYou can no longer access the CD drive or the DVD drive.
7.click here Drive Not Recognized By Roxio, PX Engine 3_00_58a. Old Version<-> EMC 7.5 Up PX Engine 4.18.16a. Update .Click here
8.Click here How to uninstall IE 7 and WMP 11.
9.Click here ImgBurn Current version: 2.5.3.0 (5,262 KB) CD / DVD / HD DVD / Blu-ray burning application
10.Click here InfoTool (Drive, Disk, Configuration, Software, Hardware, DMA settings, etc.).
11.Click here. Complete Uninstall of Creator 2011 & Creator 2012
12.Click here. Complete Uninstall of Creator 2009 and 2010 (Windows Vista and 7)
13.Click here Complete Uninstall of Creator 2009 and 2010 (Windows XP)
14.Click here Complete Uninstall of Easy Media Creator 9 & 10 on Windows Vista
15.Click here Complete Uninstall of Easy Media Creator 7.5, 8, 9, & 10 on Windows XP
16. Click here WinZip Data Compression Utility <> Click here WinRAR Data Compression Utility Click here 7-Zip Data Compression Utility
17. Click here Finding Your Computer Specs And Roxio Software Version Number.
#10
Posted 24 April 2008 - 01:42 PM
I think that Disc Copier, in EMC 7 and EMC 7.5, are the same. You can preview that .ISO, without mounting it. Open Disc Copier, browse to your .ISO, then do what shows in the following attachment.
GrandpaBruce
Vietnam Vet - 1970 - 1971
Main System:
ASUS P6T Deluxe V2 LGA 1366 Intel X58 ATX Intel Motherboard; Cooler Master ATCS 840 Case
Intel Core i7 920 Nehalem 2.66GHz 4 x 256KB L2 Cache 8MB L3 Cache LGA 1366 130W Quad-Core Processor
CORSAIR DOMINATOR 3GB (3 x 1GB) 240-Pin DDR3 SDRAM DDR3 1866
PLEXTOR Black DVD Burner, Model PX-880SA; Pioneer Black 8X BD-R 2X BD-RE 16X DVD+R Burner
XFX HD-489A-ZDFC Radeon HD 4890 1GB Video Card
Creative Sound Blaster X-Fi Titanium Fatal1ty Champion Series Sound Card
Windows XP Pro w/SP3
Backup Computer:
ASUS A8N32-SLI Deluxe
Windows 7 Pro w/SP1
#11
Posted 24 April 2008 - 01:58 PM
Thanx.
Disk Copier 7 does not offer those options.
I do not want to preview the .iso, I would need to MOUNT it.
When I get a chance, I'll boot to my OS that has Nero and see whether that works.
#12
Posted 24 April 2008 - 02:34 PM
GrandpaBruce
Vietnam Vet - 1970 - 1971
Main System:
ASUS P6T Deluxe V2 LGA 1366 Intel X58 ATX Intel Motherboard; Cooler Master ATCS 840 Case
Intel Core i7 920 Nehalem 2.66GHz 4 x 256KB L2 Cache 8MB L3 Cache LGA 1366 130W Quad-Core Processor
CORSAIR DOMINATOR 3GB (3 x 1GB) 240-Pin DDR3 SDRAM DDR3 1866
PLEXTOR Black DVD Burner, Model PX-880SA; Pioneer Black 8X BD-R 2X BD-RE 16X DVD+R Burner
XFX HD-489A-ZDFC Radeon HD 4890 1GB Video Card
Creative Sound Blaster X-Fi Titanium Fatal1ty Champion Series Sound Card
Windows XP Pro w/SP3
Backup Computer:
ASUS A8N32-SLI Deluxe
Windows 7 Pro w/SP1
#13
Posted 05 May 2008 - 09:36 AM
You're assuming it's a video DVD. I don't see where that's necessarily a good assumption.
Beware the lollipop of mediocrity. Lick it once and you'll suck forever. - Brian Wilson
[GIGABYTE GA-MA785GM-US2H MB | Athlon II X3 440 (3.0 GHz) | 2GB DDR2 RAM | 1-500GB HD (C: XP, G: Win7, D: - Apps, E: data & apps), 1-500 GB HD Data) | 2 - LiteOn DH20A4P DVD burners | External Dell QFlix DX-20A6Q DVD +/- writer | Windows 7 | Creator 2010 | Tektronix Phaser 850 solid ink printers | Epson R220 Photo/Disc printer | Ricoh GX 5050n dye sublimation ink | Epson Workforce 1100 printer
#14
Posted 05 May 2008 - 09:44 AM
That's why I asked the question in my last post. The OP never said what it was.
GrandpaBruce
Vietnam Vet - 1970 - 1971
Main System:
ASUS P6T Deluxe V2 LGA 1366 Intel X58 ATX Intel Motherboard; Cooler Master ATCS 840 Case
Intel Core i7 920 Nehalem 2.66GHz 4 x 256KB L2 Cache 8MB L3 Cache LGA 1366 130W Quad-Core Processor
CORSAIR DOMINATOR 3GB (3 x 1GB) 240-Pin DDR3 SDRAM DDR3 1866
PLEXTOR Black DVD Burner, Model PX-880SA; Pioneer Black 8X BD-R 2X BD-RE 16X DVD+R Burner
XFX HD-489A-ZDFC Radeon HD 4890 1GB Video Card
Creative Sound Blaster X-Fi Titanium Fatal1ty Champion Series Sound Card
Windows XP Pro w/SP3
Backup Computer:
ASUS A8N32-SLI Deluxe
Windows 7 Pro w/SP1
#15
Posted 06 May 2008 - 09:06 AM
No, it's retail 7.1.1.189.
Did I miss an update?
I stated
#16
Posted 06 May 2008 - 09:12 AM
Did I miss an update?
I stated
I don't know if there were any updates for version 7 beyond what you have. EMC 7.5 was an upgrade (purchase), and of course after that came EMC 8, 9, and now 10. Unfortunately, EMC 7.5 was the first version to include Disc Image Loader. An alternative to the VLC application mentioned, you could also get the DAEMON Tools free disc emulator which allows you to mount image files as a drive letter.
Hope that helps!
Umm... I can't find anywhere where you say what type of disc image file you're trying to mount, video or data. (.ISO can be either one.)
Edited by d_deweywright, 06 May 2008 - 09:31 AM.
Beware the lollipop of mediocrity. Lick it once and you'll suck forever. - Brian Wilson
[GIGABYTE GA-MA785GM-US2H MB | Athlon II X3 440 (3.0 GHz) | 2GB DDR2 RAM | 1-500GB HD (C: XP, G: Win7, D: - Apps, E: data & apps), 1-500 GB HD Data) | 2 - LiteOn DH20A4P DVD burners | External Dell QFlix DX-20A6Q DVD +/- writer | Windows 7 | Creator 2010 | Tektronix Phaser 850 solid ink printers | Epson R220 Photo/Disc printer | Ricoh GX 5050n dye sublimation ink | Epson Workforce 1100 printer
#17
Posted 06 May 2008 - 09:13 AM
Did I miss an update?
I stated
Doesn't look like you did!
Update Easy Media Creator 7 (Boxed Version)
Update the Retail (CD-ROM) version of Easy Media Creator 7.0x suite to 7.1.1.189 (English Only)click here.
cd
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
My Computer Specs click show.
1.Click here Beginners Guide - Blank DVD Media Type Definitions & What A Firmware Upgrade Is for Your Burner.
2.Click here Firmware HQ - site dedicated to providing you with the latest firmware releases for your optical disc drives.
3.Click here CD-DVD Speed
4.Click here CD-DVD Speed - A user guide
5.Click here Enabling/Checking DMA in Windows Vista, XP, 2000, Me, 9x.
6.Click hereYou can no longer access the CD drive or the DVD drive.
7.click here Drive Not Recognized By Roxio, PX Engine 3_00_58a. Old Version<-> EMC 7.5 Up PX Engine 4.18.16a. Update .Click here
8.Click here How to uninstall IE 7 and WMP 11.
9.Click here ImgBurn Current version: 2.5.3.0 (5,262 KB) CD / DVD / HD DVD / Blu-ray burning application
10.Click here InfoTool (Drive, Disk, Configuration, Software, Hardware, DMA settings, etc.).
11.Click here. Complete Uninstall of Creator 2011 & Creator 2012
12.Click here. Complete Uninstall of Creator 2009 and 2010 (Windows Vista and 7)
13.Click here Complete Uninstall of Creator 2009 and 2010 (Windows XP)
14.Click here Complete Uninstall of Easy Media Creator 9 & 10 on Windows Vista
15.Click here Complete Uninstall of Easy Media Creator 7.5, 8, 9, & 10 on Windows XP
16. Click here WinZip Data Compression Utility <> Click here WinRAR Data Compression Utility Click here 7-Zip Data Compression Utility
17. Click here Finding Your Computer Specs And Roxio Software Version Number.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users






