[bear1k]

I click on the desktop Icon and the program starts and functions normally.

I close program ,normal as far as I can tell.

Try to start it agin and nothing happens. If I reboot I can start the program, but only ONCE!

I have used the repair program for the registery and re booted and of course it will load--once!

I do not know what is wrong and could use any and all help!

Thanks,

bear1k

[Syrallas]

I click on the desktop Icon and the program starts and functions normally.

I close program ,normal as far as I can tell.

Try to start it agin and nothing happens. If I reboot I can start the program, but only ONCE!

I have used the repair program for the registery and re booted and of course it will load--once!

I do not know what is wrong and could use any and all help!

Thanks,

bear1k

Try a clean install. Use this link for XP or this link for Vista.

Turn off your anti-virus / spyware programs when doing the install.

Follow instructions in the clean install to the letter. I'd suggest you print them out before hand and don't skip steps. Don't have any other programs running while you do this.

If the above doesn't work you will need to post pc specs.

This post has been edited by Syrallas: 23 July 2008 - 06:01 AM

[Brendon]

If rebooting [which unloads everything from memory] will allow you to start "the program" [you don't say which program] once, but after exiting it you can't restart it until you reboot, then it seems likely that "the program" is staying resident after you exit.

What is "the program" and how long are you waiting after exit before you try to start it again?
Why are you exiting, if you need "the program" again so soon afterwards?

Regards,
Brendon

[bear1k]

If rebooting [which unloads everything from memory] will allow you to start "the program" [you don't say which program] once, but after exiting it you can't restart it until you reboot, then it seems likely that "the program" is staying resident after you exit.

What is "the program" and how long are you waiting after exit before you try to start it again?
Why are you exiting, if you need "the program" again so soon afterwards?

Regards,
Brendon

"The program" is Easy Media Creator 10 Suite.

The first time it happened the time span was ~ 24 hours; several other times span was 10min. to 2 hours ,just to see if it would load.

Thanks for your reply.

bear1k

[cdanteek]

then it seems likely that "the program" is staying resident after you exit.

Would you check and see if any Roxio/Sonic programs appear in task manager, processes, when the program is closed? If so, highlight them by clicking on them and click end task, then try to open 'Easy Media Creator 10 Suite' again.

cd

[grandpabruce]

"The program" is Easy Media Creator 10 Suite.

The first time it happened the time span was ~ 24 hours; several other times span was 10min. to 2 hours ,just to see if it would load.

Thanks for your reply.

bear1k

There is no program called Easy Media Creator 10 Suite. There are, however, many programs in the EMC 10 suite, and that is what Brendon was asking. What program, in the suite, were you using?

During the 24 hour time span that you mentioned, was the computer rebooted?

[cdanteek]

Opening the 'Easy Media Creator 10 Suite' it's self launches the RoxMediaDb10.exe.



cd

[bear1k]

Would you check and see if any Roxio/Sonic programs appear in task manager, processes, when the program is closed? If so, highlight them by clicking on them and click end task, then try to open 'Easy Media Creator 10 Suite' again.

cd

After I closed Media Center 10; I found the following processes listed:
Roxio_ central 36
Rox Media DB10
RoxWatch10
RoxWatchTray10
I closed all of these and clicked on the Desk Top Icon(Easy Media Creator 10) and it opened correctly.

bear1k

There is no program called Easy Media Creator 10 Suite. .... What program, in the suite, were you using?

During the 24 hour time span that you mentioned, was the computer rebooted?

When I first installed the program "Easy Media Creator 10", it left an Icon on my desk top labled "Easy Media Creator Suite" and that is how I start "the program". If their is no program like that I am not sure why the instalation left the Icon on my desk top.

I used the "Audio" program.

Thanks for your help.

bear1k

[Syrallas]

When I first installed the program "Easy Media Creator 10", it left an Icon on my desk top labled "Easy Media Creator Suite" and that is how I start "the program". If their is no program like that I am not sure why the instalation left the Icon on my desk top.

That icon should be there -- you click on that to open the suite of available programs to use, like videowave, MyDvd, etc.

Glad you are OK!

This post has been edited by Syrallas: 24 July 2008 - 05:09 AM

[cdanteek]

After I closed Media Center 10; I found the following processes listed:
Roxio_ central 36
Rox Media DB10
RoxWatch10
RoxWatchTray10
I closed all of these and clicked on the Desk Top Icon(Easy Media Creator 10) and it opened correctly.

bear1k

bear1k,
in XP click start, run, type in, msconfig, click ok. System Configuration Utility window opens, click the startup tab, uncheck anything named Roxio like the ones you mentioned above and click apply at the bottom. Now reboot the pc, a warning message appears while booting. I think you click ok, so it won't show when rebooting again.

Now open Roxio from your icon on the desktop and use some program. When done close the program then check for running processes in task manager, hopefully there won't be any.

cd

[bear1k]

[quote name='cdanteek' date='Jul 24 2008, 05:42 AM' post='215398']
bear1k,
in XP click start, run, type in, msconfig, click ok. System Configuration Utility window opens, click the startup tab, uncheck anything named Roxio like the ones you mentioned above and click apply at the bottom. Now reboot the pc, a warning message appears while booting. I think you click ok, so it won't show when rebooting again.

Now open Roxio from your icon on the desktop and use some program. When done close the program then check for running processes in task manager, hopefully there won't be any.

cd
[/quote

I did the msconfig and found two items one on my list the other not.
Did the apply and rebooted.
Opened with the Icon and selected a program and then closed.Running processes showed the first three items from my list, but not the RoxWatchTray10 and of course the Icon will not start the Roxio.

I am not very good at these things, as you see.

bear1k

[cdanteek]

I did the msconfig and found two items one on my list the other not.
Did the apply and rebooted.
Opened with the Icon and selected a program and then closed.Running processes showed the first three items from my list, but not the RoxWatchTray10 and of course the Icon will not start the Roxio.

I am not very good at these things, as you see.

bear1k

Try this in XP, click start, right click my computer, click manage. The computer management window opens. Click the + next to services and applications, then click (highlight) services. On the right side of this screen look for Roxio entries and what they are set to, under startup. Set them to manual by double clicking or right click properties on them, then under startup type, click the drop down arrow and select manual. Now click the apply button at the bottom of that window. Set all Roxio entries to manual, now see if that helps?

cd

[bear1k]

Try this in XP, click start, right click my computer, click manage. The computer management window opens. Click the + next to services and applications, then click (highlight) services. On the right side of this screen look for Roxio entries and what they are set to, under startup. Set them to manual by double clicking or right click properties on them, then under startup type, click the drop down arrow and select manual. Now click the apply button at the bottom of that window. Set all Roxio entries to manual, now see if that helps?

cd

I did as you said above, except I rebooted after the above.
First I checked to see if any rixio process was runing; none were.
I clicked on the Rixio Icon and the menu came up and then I closed the program. Waited a short time and then clicked on the icon again---no joy! Then I opened task manager-processes and their was one rixio item running---Roxio_Central36. It apears that i am down to one process not closing(is that the right way to look at it?). I have sounds that play when various events in the OS. When I close the rixio I get NO closing sound; so you are right on target for the problem--it is the solution that is very evasive!

Thank for your continued help; it always stuns me how you come up with so many things to try!!

bear1k

[cdanteek]

Getting close are we! I would check ' msconfig ' startup tab again, it might not be real obvious and hiding from you that "Roxio_Central36"..

cd

[bear1k]

Getting close are we! I would check ' msconfig ' startup tab again, it might not be real obvious and hiding from you that "Roxio_Central36"..

cd

I have ckecked again in msconfig startup and there is nothing that remotely looks rixio. Also looked at the run tab and all rixio items were "stopped".

Ido not know

bear1k

[cdanteek]

I have ckecked again in msconfig startup and there is nothing that remotely looks rixio. Also looked at the run tab and all rixio items were "stopped".

Ido not know

bear1k

Would you check two things, instead of the desktop icon. Click start, all programs, Roxio Easy Media Creator 10, Roxio Easy Media Creator 10 Suite. It will start the Home screen just like the desktop icon does then use it. What I want you to check is when you close the program from starting it this way does it stop 'Roxio_Central36' process running in task manager? Then do the same Click start, all programs, Roxio Easy Media Creator 10, click Music Disc Creator. Use it and see when shut down if anything is running in task manager?

cd

[bear1k]

Would you check two things, instead of the desktop icon. Click start, all programs, Roxio Easy Media Creator 10, Roxio Easy Media Creator 10 Suite. It will start the Home screen just like the desktop icon does then use it. What I want you to check is when you close the program from starting it this way does it stop 'Roxio_Central36' process running in task manager? Then do the same Click start, all programs, Roxio Easy Media Creator 10, click Music Disc Creator. Use it and see when shut down if anything is running in task manager?

cd

I did the folowing:

I had to reboot to get roxio to run from any location

I used start-all programs-

Closed and Roxic_Central36 was still running in task mgr

Rebooted

Start all programs------- cicked on Music Disc Creator

Shut down------Roxio_Central36 was still runing



I hope that is what you wanted to do.

bear1k

[cdanteek]

bear1k,

I could think of other things to try, not really sure they would help!
Things like Disk Cleanup and check it all, Defrag the Hard Drive, do start run, %temp%, ok, delete all temp files!

Unless someone else has a idea?? I think you probably need to do #10 or 11 in my signature (what os version applies). Or live with the work around endtask way.

sorry, cd