Roxio Community: Sense Key Error - Roxio Community

Jump to content

Roxio Community
Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

Sense Key Error burn error code- failed burn

#1 User is offline   heartaflame 

  • Newbie
  • Pip
  • Group: Members
  • Posts: 1
  • Joined: 01-December 08

Posted 01 December 2008 - 05:58 PM

Hope someone can help...
I am running an older mac g3, with 256 mb and using Toast 5.02 with a LaCie fireware burner- This has worked for years with no problem. Now I get this error:

The drive reported an error, sense key = medium error
Sense code = 0x 73, 0 x 03

The Drive reported an error
Sense Key = ABORTED COMMAND
Sense Code = 0 x 04
LOGIC UNIT NOT READY, CAUSE NOT REPORTABLE

The final numbers sometime change. I was also getting an overrun error about the 2 gb cache. I hear the disc spin, stop, spin and the progress bar doesn't move. Is there a place for me to turn to?
0

#2 User is online   tsantee 

  • Digital Guru
  • PipPipPipPipPipPip
  • Group: Members
  • Posts: 10,709
  • Joined: 04-January 06

Posted 03 December 2008 - 08:36 AM

A medium error means the drive can't write to the disc. It could be bad media or media that isn't fully supported by the drive's firmware. It could be the laser needs to be cleaned on your drive (using a laser-cleaning disc). It could be the drive is failing.

Check the LaCie site to see if a firmware update is available for your drive.

This post has been edited by tsantee: 03 December 2008 - 08:37 AM

I'm just a fellow Toast-user so please don't blame Roxio for any misguidance I may provide. And do let me know if your issue gets solved. Cheers from Eugene, Oregon!
0

Share this topic:


Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users