I changed computers and am trying to reinstall Easy version 10. I installed version 8 with no trouble but version 10 won't install because the installer cant find C/Easy 10/ Data1/Cab.
1
Error 1311 Cant Find Data1.cab File
Started by
garybeafl
, Feb 17 2009 12:48 PM
5 replies to this topic
#2
gi7omy
-
- Digital Guru
-
- 16,976 posts
Digital Guru
- Gender:Male
- Location:Belfast, Ireland
Posted 17 February 2009 - 01:28 PM
Copy the files from the disc to a folder on the hard drive and run setup from there.
If the files fail to copy, you have a bad disc
If the files fail to copy, you have a bad disc
If it ain't broke, fiddle with it until it breaks, then fiddle with it until you get it fixed
"Rincewind could scream for mercy in nineteen languages and just scream in another forty-four "
"If computers get too powerful, we can organize them into a committee; that will do them in."
“Computers have enabled people to make more mistakes faster than almost any invention in history, with the possible exception of tequila and hand guns.” — Mitch Ratcliffe
Daithi
Home Brew computer
Intel I7 950 on Gigabyte X58A UD3R mobo
12 GB Three Channel DDRAM
Radeon HD4850 512 MB GDR3 graphics
Signalink USB Audio Codec for ham radio connection
1 x 160 GB, 1 x 330 GB, 1 x 400 GB IDE drives
4 x 250 GB SATA 2
LG HL-DT-ST GGW-H20L BD-RE drive
22" Acer P223W monitor
EMC 7.5 on Windows XP 32 SP3
EMC10 on Windows XP64 SP2
Creator 2011 on Windows 7 Ultimate
ECD6 on Gentoo Linux (running under VMWare)
"Rincewind could scream for mercy in nineteen languages and just scream in another forty-four "
"If computers get too powerful, we can organize them into a committee; that will do them in."
“Computers have enabled people to make more mistakes faster than almost any invention in history, with the possible exception of tequila and hand guns.” — Mitch Ratcliffe
Daithi
Home Brew computer
Intel I7 950 on Gigabyte X58A UD3R mobo
12 GB Three Channel DDRAM
Radeon HD4850 512 MB GDR3 graphics
Signalink USB Audio Codec for ham radio connection
1 x 160 GB, 1 x 330 GB, 1 x 400 GB IDE drives
4 x 250 GB SATA 2
LG HL-DT-ST GGW-H20L BD-RE drive
22" Acer P223W monitor
EMC 7.5 on Windows XP 32 SP3
EMC10 on Windows XP64 SP2
Creator 2011 on Windows 7 Ultimate
ECD6 on Gentoo Linux (running under VMWare)
#3
garybeafl
-
- Members
-
- 7 posts
Newbie
Posted 18 February 2009 - 12:03 PM
I put the files on the hard drive and it still will not install because it can't find the file "Data1.cab"
I can see the file it is under "EMC100". I was wondering if someone could post the file here and I could copy it and replace my file "Data1.cab"? I don't think that would be illegal since I bought the program.
Could someone do this for me please? Or if this fourm has private mail you could send it to me that way. I don't want to post my e mail address because I don't want a lot of spam.
Thanks Gary
I can see the file it is under "EMC100". I was wondering if someone could post the file here and I could copy it and replace my file "Data1.cab"? I don't think that would be illegal since I bought the program.
Could someone do this for me please? Or if this fourm has private mail you could send it to me that way. I don't want to post my e mail address because I don't want a lot of spam.
Thanks Gary
#4
gi7omy
-
- Digital Guru
-
- 16,976 posts
Digital Guru
- Gender:Male
- Location:Belfast, Ireland
Posted 18 February 2009 - 12:11 PM
That file is 423 MB and there's no way that could be posted here or even e-mailed.
If setup.exe can't read it, there's something seriously wrong on your computer (or the files are corrupted)
What you could try is to log on manually to the software updates and download the 10.1 update - that should be complete and try installing that (that is presuming you did register the program to get access to the updates)
If setup.exe can't read it, there's something seriously wrong on your computer (or the files are corrupted)
What you could try is to log on manually to the software updates and download the 10.1 update - that should be complete and try installing that (that is presuming you did register the program to get access to the updates)
If it ain't broke, fiddle with it until it breaks, then fiddle with it until you get it fixed
"Rincewind could scream for mercy in nineteen languages and just scream in another forty-four "
"If computers get too powerful, we can organize them into a committee; that will do them in."
“Computers have enabled people to make more mistakes faster than almost any invention in history, with the possible exception of tequila and hand guns.” — Mitch Ratcliffe
Daithi
Home Brew computer
Intel I7 950 on Gigabyte X58A UD3R mobo
12 GB Three Channel DDRAM
Radeon HD4850 512 MB GDR3 graphics
Signalink USB Audio Codec for ham radio connection
1 x 160 GB, 1 x 330 GB, 1 x 400 GB IDE drives
4 x 250 GB SATA 2
LG HL-DT-ST GGW-H20L BD-RE drive
22" Acer P223W monitor
EMC 7.5 on Windows XP 32 SP3
EMC10 on Windows XP64 SP2
Creator 2011 on Windows 7 Ultimate
ECD6 on Gentoo Linux (running under VMWare)
"Rincewind could scream for mercy in nineteen languages and just scream in another forty-four "
"If computers get too powerful, we can organize them into a committee; that will do them in."
“Computers have enabled people to make more mistakes faster than almost any invention in history, with the possible exception of tequila and hand guns.” — Mitch Ratcliffe
Daithi
Home Brew computer
Intel I7 950 on Gigabyte X58A UD3R mobo
12 GB Three Channel DDRAM
Radeon HD4850 512 MB GDR3 graphics
Signalink USB Audio Codec for ham radio connection
1 x 160 GB, 1 x 330 GB, 1 x 400 GB IDE drives
4 x 250 GB SATA 2
LG HL-DT-ST GGW-H20L BD-RE drive
22" Acer P223W monitor
EMC 7.5 on Windows XP 32 SP3
EMC10 on Windows XP64 SP2
Creator 2011 on Windows 7 Ultimate
ECD6 on Gentoo Linux (running under VMWare)
#5
garybeafl
-
- Members
-
- 7 posts
Newbie
Posted 19 February 2009 - 11:50 AM
I unistalled the program and then reinstalled it and this time it installed perfectly. The only trouble now is it will not run when I click on it.
Any thoughts on why this is. I also have version 8 on my computer and it comes right up. When I click on version 10 I get an hourglass and then nothing. It used to work.
Any thoughts on why this is. I also have version 8 on my computer and it comes right up. When I click on version 10 I get an hourglass and then nothing. It used to work.
#6
gi7omy
-
- Digital Guru
-
- 16,976 posts
Digital Guru
- Gender:Male
- Location:Belfast, Ireland
Posted 20 February 2009 - 05:22 AM
Completely remove both programs - follow this guide to the letter (and don't add or skip anything)
http://forums.support.roxio.com/index.php?showtopic=38850
Then re-install 10 (8 was flaky anyway)
http://forums.support.roxio.com/index.php?showtopic=38850
Then re-install 10 (8 was flaky anyway)
If it ain't broke, fiddle with it until it breaks, then fiddle with it until you get it fixed
"Rincewind could scream for mercy in nineteen languages and just scream in another forty-four "
"If computers get too powerful, we can organize them into a committee; that will do them in."
“Computers have enabled people to make more mistakes faster than almost any invention in history, with the possible exception of tequila and hand guns.” — Mitch Ratcliffe
Daithi
Home Brew computer
Intel I7 950 on Gigabyte X58A UD3R mobo
12 GB Three Channel DDRAM
Radeon HD4850 512 MB GDR3 graphics
Signalink USB Audio Codec for ham radio connection
1 x 160 GB, 1 x 330 GB, 1 x 400 GB IDE drives
4 x 250 GB SATA 2
LG HL-DT-ST GGW-H20L BD-RE drive
22" Acer P223W monitor
EMC 7.5 on Windows XP 32 SP3
EMC10 on Windows XP64 SP2
Creator 2011 on Windows 7 Ultimate
ECD6 on Gentoo Linux (running under VMWare)
"Rincewind could scream for mercy in nineteen languages and just scream in another forty-four "
"If computers get too powerful, we can organize them into a committee; that will do them in."
“Computers have enabled people to make more mistakes faster than almost any invention in history, with the possible exception of tequila and hand guns.” — Mitch Ratcliffe
Daithi
Home Brew computer
Intel I7 950 on Gigabyte X58A UD3R mobo
12 GB Three Channel DDRAM
Radeon HD4850 512 MB GDR3 graphics
Signalink USB Audio Codec for ham radio connection
1 x 160 GB, 1 x 330 GB, 1 x 400 GB IDE drives
4 x 250 GB SATA 2
LG HL-DT-ST GGW-H20L BD-RE drive
22" Acer P223W monitor
EMC 7.5 on Windows XP 32 SP3
EMC10 on Windows XP64 SP2
Creator 2011 on Windows 7 Ultimate
ECD6 on Gentoo Linux (running under VMWare)
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
