Jump to content

Roxio Community

Skipping/Jumping giving me head ache.

Started by k-guy , Oct 27 2009 10:10 AM

  • Please log in to reply
14 replies to this topic

#1 k-guy

k-guy

    Rookie

  • Members
  • PipPip
  • 10 posts

Posted 27 October 2009 - 10:10 AM

Gateway E-4000
XP Pro SP3
version 2000
Pent 4 2.40 GHz
2.40 GHz 512 Ram
2.0 USB Generic
  

Updated all drivers, installed the SP2.
Now I get picture. Just can't get a smooth picture.
Tried VCR and Vid camera. S cable and Composite.
Defraged.
Can't capture. Can't burn. Have to turn off computer to
stop constantant jerking sceen to sceen then back to sceen.
Help?

Edited by k-guy, 27 October 2009 - 10:12 AM.

#2 grandpabruce

grandpabruce

    Digital Guru

  • Digital Guru
  • PipPipPipPipPipPip
  • 19,446 posts
  • Gender:Male

Posted 27 October 2009 - 11:03 AM

QUOTE (k-guy @ Oct 27 2009, 01:10 PM) <{POST_SNAPBACK}>
Gateway E-4000
XP Pro SP3
version 2000
Pent 4 2.40 GHz
2.40 GHz 512 Ram
2.0 USB Generic
  

Updated all drivers, installed the SP2.
Now I get picture. Just can't get a smooth picture.
Tried VCR and Vid camera. S cable and Composite.
Defraged.
Can't capture. Can't burn. Have to turn off computer to
stop constantant jerking sceen to sceen then back to sceen.
Help?


Update the drivers for your video card/chip, and try again.

What video card/chip do you have?  It may not be up to snuff for video work.
Life is good!
GrandpaBruce
Vietnam Vet - 1970 - 1971

Main System:
ASUS P6T Deluxe V2 LGA 1366 Intel X58 ATX Intel Motherboard; Cooler Master ATCS 840 Case
Intel Core i7 920 Nehalem 2.66GHz 4 x 256KB L2 Cache 8MB L3 Cache LGA 1366 130W Quad-Core Processor
CORSAIR DOMINATOR 3GB (3 x 1GB) 240-Pin DDR3 SDRAM DDR3 1866
PLEXTOR Black DVD Burner, Model PX-880SA; Pioneer Black 8X BD-R 2X BD-RE 16X DVD+R Burner
XFX HD-489A-ZDFC Radeon HD 4890 1GB Video Card
Creative Sound Blaster X-Fi Titanium Fatal1ty Champion Series Sound Card
Windows XP Pro w/SP3

Backup Computer:
ASUS A8N32-SLI Deluxe
Windows 7 Pro w/SP1

#3 k-guy

k-guy

    Rookie

  • Members
  • PipPip
  • 10 posts

Posted 28 October 2009 - 09:44 AM

QUOTE (grandpabruce @ Oct 27 2009, 12:03 PM) <{POST_SNAPBACK}>
Update the drivers for your video card/chip, and try again.

What video card/chip do you have?  It may not be up to snuff for video work.





Being the novice that I am, I think this is what you are asking me for..
In my office right now. Will try update to night?


Inter 82845G /GL/PE/GV  Graphics Controller.

#4 k-guy

k-guy

    Rookie

  • Members
  • PipPip
  • 10 posts

Posted 29 October 2009 - 07:44 PM

So I updated my Vid drive. Unistalled and reinstalled Program. Registerd twice. Down load up 2.
Cant open zip. Had to buy Winzip just to make sure. Now I have 2 copies of it.

Go to open the update after unzip. GET SOFTWARE NOT FOUND. REINSTALL SOFT WARE.
Did this twice. Still get same message.

So far this is not Easy VHS to DVD.

Loose Patiants. Update Vid drive. Reinstall Ser pak 2
Open Service Pack 2 get CANT FIND SOFTWARE. REISNSTALL VHS TO DVD.
Registerted again. Re downed service paCK 2. GET SAME MESSAGE. REBOOT.
Complete uninstall of all software. Reload Software. Down loaded SP2 again.
Open zip. get the same dang message. Cant find software/
Registered again. No differance.

Can't take much more.

SO FAR NOT EASY VHS TO DVD!
Not happy as it is. Bought 2009. not told I just needed USB adapter. Bougt VHS to DVD only
to find same program.

Will want reembursement if no fix.
Will go public.

#5 Jim_Hardin

Jim_Hardin

    Digital Guru

  • Digital Guru
  • PipPipPipPipPipPip
  • 25,364 posts
  • Gender:Male

Posted 30 October 2009 - 01:35 AM

QUOTE (k-guy @ Oct 29 2009, 11:44 PM) <{POST_SNAPBACK}>
So I updated my Vid drive. Unistalled and reinstalled Program. Registerd twice. Down load up 2.
Cant open zip. Had to buy Winzip just to make sure. Now I have 2 copies of it.

Go to open the update after unzip. GET SOFTWARE NOT FOUND. REINSTALL SOFT WARE.
Did this twice. Still get same message.

So far this is not Easy VHS to DVD.

Loose Patiants. Update Vid drive. Reinstall Ser pak 2
Open Service Pack 2 get CANT FIND SOFTWARE. REISNSTALL VHS TO DVD.
Registerted again. Re downed service paCK 2. GET SAME MESSAGE. REBOOT.
Complete uninstall of all software. Reload Software. Down loaded SP2 again.
Open zip. get the same dang message. Cant find software/
Registered again. No differance.

Can't take much more.

SO FAR NOT EASY VHS TO DVD!
Not happy as it is. Bought 2009. not told I just needed USB adapter. Bougt VHS to DVD only
to find same program.

Will want reembursement if no fix.
Will go public.

You have Creator 2009 on your PC???
Posted Image

#6 k-guy

k-guy

    Rookie

  • Members
  • PipPip
  • 10 posts

Posted 30 October 2009 - 08:44 AM

QUOTE (Jim_Hardin @ Oct 30 2009, 01:35 AM) <{POST_SNAPBACK}>
You have Creator 2009 on your PC???



Not any more. VHS To DVD uninstalled it.

#7 Jim_Hardin

Jim_Hardin

    Digital Guru

  • Digital Guru
  • PipPipPipPipPipPip
  • 25,364 posts
  • Gender:Male

Posted 30 October 2009 - 11:05 AM

QUOTE (k-guy @ Oct 30 2009, 12:44 PM) <{POST_SNAPBACK}>
Not any more. VHS To DVD uninstalled it.

No it does not!

2009 and V2D cannot exist on the same PC at the same time, they destroy each other.

That is why they pack a Warning Card with each and every Box of V2D:

Warning_Card.jpg

You will have to perform the full Clean Install to clean up that mess - XP
Posted Image

#8 k-guy

k-guy

    Rookie

  • Members
  • PipPip
  • 10 posts

Posted 02 November 2009 - 08:09 AM

QUOTE (Jim_Hardin @ Oct 30 2009, 12:05 PM) <{POST_SNAPBACK}>
No it does not!

2009 and V2D cannot exist on the same PC at the same time, they destroy each other.

That is why they pack a Warning Card with each and every Box of V2D:

Warning_Card.jpg

You will have to perform the full Clean Install to clean up that mess - XP



Thats interesting. I don't think I got that warning. When I insalled V2D, install wiz said it was uninstalling 09.
K, will give the old uninstall of all Roxio? and Start Over? Wish me luck.

#9 k-guy

k-guy

    Rookie

  • Members
  • PipPip
  • 10 posts

Posted 03 November 2009 - 07:52 PM

QUOTE (k-guy @ Nov 2 2009, 09:09 AM) <{POST_SNAPBACK}>
Thats interesting. I don't think I got that warning. When I insalled V2D, install wiz said it was uninstalling 09.
K, will give the old uninstall of all Roxio? and Start Over? Wish me luck.




So I went in and cleaned hard drive up as suggested. Reloaded. Seem a little better.
Does it matter about my VCR? Has S out put. Doesnt make difference.
have a JVC  HR-S3901U?

#10 Jim_Hardin

Jim_Hardin

    Digital Guru

  • Digital Guru
  • PipPipPipPipPipPip
  • 25,364 posts
  • Gender:Male

Posted 04 November 2009 - 04:22 AM

What are your PC specs, video card in particular??? (like gpb and I have in our signature)
Posted Image

#11 k-guy

k-guy

    Rookie

  • Members
  • PipPip
  • 10 posts

Posted 04 November 2009 - 11:49 AM

QUOTE (Jim_Hardin @ Nov 4 2009, 05:22 AM) <{POST_SNAPBACK}>
What are your PC specs, video card in particular??? (like gpb and I have in our signature)


As I mention up to top:


Gateway E-4000
XP Pro SP3
version 2000
Pent 4 2.40 GHz
2.40 GHz 512 Ram
2.0 USB Generic

Inter 82845G /GL/PE/GV Graphics Controller.

All drives up dated... Picture


#12 myguggi

myguggi

    Digital Guru

  • Digital Guru
  • PipPipPipPipPipPip
  • 18,380 posts
  • Gender:Male

Posted 04 November 2009 - 01:12 PM

QUOTE (k-guy @ Nov 4 2009, 02:49 PM) <{POST_SNAPBACK}>
As I mention up to top:


Gateway E-4000
XP Pro SP3
version 2000
Pent 4 2.40 GHz
2.40 GHz 512 Ram
2.0 USB Generic

Inter 82845G /GL/PE/GV Graphics Controller.

All drives up dated... Picture


Is your software render mode set to Software? look in Videowave under Tools/options. If set to Hardware it will definitely give you all sorts of problems. I have the same onboard graphics chip and it will not work with the Hardware setting.

Walt

Dell Dimension 4500S;Windows XP Home Edition  SP3; IntelŪ PentiumŪ 4 CPU 2.00GHz, 784MB RAM
(NVIDIA GeForce FX 5200, 128 MB memory disabled because of failure)
IntelŪ 82845G/GL/GE/PE/GV Graphics Controller; DirectX 9.0c (4.09.0000.0904)
SoundMAX Digital Audio
SamsunG CDR/DVD-ROm SM 332B
HLDS GSA-5120D External LG Super-Multi ReWriter
WDC WD400BB-75DEA0, 40 GB HD; Prolific PL3507 Combo External Hard Drive, 80 GB; Maxtor 6 L200R0 USB Hard Drive, 250GB

HP Pavilion dv6 Notebook; Intel Duo CPU 64 bit, T6400 @ 2.0Ghz; 4.0 GB RAM; Vista Home Premium 64bit
Toshiba MK3252GSX ATA 286GB hard drive; HL-DT-ST DVDRAM GSA-T50L ATA burner
Intel 4Series Express Chipset

#13 Jim_Hardin

Jim_Hardin

    Digital Guru

  • Digital Guru
  • PipPipPipPipPipPip
  • 25,364 posts
  • Gender:Male

Posted 04 November 2009 - 01:50 PM

You do not have an actual Graphic Card!

The Software Render that Walt suggests should do the trick.

Posted Image

#14 k-guy

k-guy

    Rookie

  • Members
  • PipPip
  • 10 posts

Posted 04 November 2009 - 09:22 PM

QUOTE (myguggi @ Nov 4 2009, 02:12 PM) <{POST_SNAPBACK}>
Is your software render mode set to Software? look in Videowave under Tools/options. If set to Hardware it will definitely give you all sorts of problems. I have the same onboard graphics chip and it will not work with the Hardware setting.



I feel like a dolt. Where do I find Videowave? In VHS2DVD software? If so, i cant find it.
Really preciate your help.

#15 myguggi

myguggi

    Digital Guru

  • Digital Guru
  • PipPipPipPipPipPip
  • 18,380 posts
  • Gender:Male

Posted 04 November 2009 - 10:25 PM

QUOTE (k-guy @ Nov 5 2009, 12:22 AM) <{POST_SNAPBACK}>
I feel like a dolt. Where do I find Videowave? In VHS2DVD software? If so, i cant find it.
Really preciate your help.


Edit - Advanced   or something similar on the main page

Walt

Dell Dimension 4500S;Windows XP Home Edition  SP3; IntelŪ PentiumŪ 4 CPU 2.00GHz, 784MB RAM
(NVIDIA GeForce FX 5200, 128 MB memory disabled because of failure)
IntelŪ 82845G/GL/GE/PE/GV Graphics Controller; DirectX 9.0c (4.09.0000.0904)
SoundMAX Digital Audio
SamsunG CDR/DVD-ROm SM 332B
HLDS GSA-5120D External LG Super-Multi ReWriter
WDC WD400BB-75DEA0, 40 GB HD; Prolific PL3507 Combo External Hard Drive, 80 GB; Maxtor 6 L200R0 USB Hard Drive, 250GB

HP Pavilion dv6 Notebook; Intel Duo CPU 64 bit, T6400 @ 2.0Ghz; 4.0 GB RAM; Vista Home Premium 64bit
Toshiba MK3252GSX ATA 286GB hard drive; HL-DT-ST DVDRAM GSA-T50L ATA burner
Intel 4Series Express Chipset
Back to Easy VHS to DVD


1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users

  1. Roxio Community
  2. → Other Applications
  3. → Easy VHS to DVD