Thank you,
Ken
2
Capture from option missing...
Started by
Kenny Mike
, Oct 30 2009 09:50 AM
3 replies to this topic
#1
Kenny Mike
-
- Members
-
- 7 posts
Newbie
Posted 30 October 2009 - 09:50 AM
I was having trouble earlier because I wasn't able to hear the LP as it recorded to my laptop but I was able to capture with either the video capture USB 2861 device or the input jack plugged into my microphone/line-in jack. Trying to resolve my 'hearing while recording' problem, I went online and bought DriverScanner from UniBlue. The tool found 5 old drivers and I let it do the update. Now when I go into the LP and Tape assistant the 'Capture from' drop-down doesn't see the USB device although my laptop knows it is there and "working properly". If I revert back to the mic/line jack, the sound clips off the charts and the auto tool does not do any adjustments... it opens and shows progress 0% and then just flicks off. I went into the knowledge base and found history of the problem and the fix was a new driver for the Video Capture USB... I've installed the driver and still no luck... hope one of you Gurus can give me some advice.
Thank you,
Ken
Thank you,
Ken
#2
cdanteek
-
- Digital Guru
-
- 20,254 posts
Digital Guru
- Gender:Male
- Location:Prairie Rapids Crossing.
Posted 30 October 2009 - 10:49 AM
QUOTE
I went online and bought DriverScanner from UniBlue. The tool found 5 old drivers and I let it do the update.
Wish you came here before spending $ on that!
What operating system are you running Creator 2009 on?
Are you sure you have C2009 software?
cd
cd
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
My Computer Specs click show.
1.Click here Beginners Guide - Blank DVD Media Type Definitions & What A Firmware Upgrade Is for Your Burner.
2.Click here Firmware HQ - site dedicated to providing you with the latest firmware releases for your optical disc drives.
3.Click here CD-DVD Speed
4.Click here CD-DVD Speed - A user guide
5.Click here Enabling/Checking DMA in Windows Vista, XP, 2000, Me, 9x.
6.Click hereYou can no longer access the CD drive or the DVD drive.
7.click here Drive Not Recognized By Roxio, PX Engine 3_00_58a. Old Version<-> EMC 7.5 Up PX Engine 4.18.16a. Update .Click here
8.Click here How to uninstall IE 7 and WMP 11.
9.Click here ImgBurn Current version: 2.5.3.0 (5,262 KB) CD / DVD / HD DVD / Blu-ray burning application
10.Click here InfoTool (Drive, Disk, Configuration, Software, Hardware, DMA settings, etc.).
11.Click here. Complete Uninstall of Creator 2011 & Creator 2012
12.Click here. Complete Uninstall of Creator 2009 and 2010 (Windows Vista and 7)
13.Click here Complete Uninstall of Creator 2009 and 2010 (Windows XP)
14.Click here Complete Uninstall of Easy Media Creator 9 & 10 on Windows Vista
15.Click here Complete Uninstall of Easy Media Creator 7.5, 8, 9, & 10 on Windows XP
16. Click here WinZip Data Compression Utility <> Click here WinRAR Data Compression Utility Click here 7-Zip Data Compression Utility
17. Click here Finding Your Computer Specs And Roxio Software Version Number.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
My Computer Specs click show.
Spoiler
1.Click here Beginners Guide - Blank DVD Media Type Definitions & What A Firmware Upgrade Is for Your Burner.
2.Click here Firmware HQ - site dedicated to providing you with the latest firmware releases for your optical disc drives.
3.Click here CD-DVD Speed
4.Click here CD-DVD Speed - A user guide
5.Click here Enabling/Checking DMA in Windows Vista, XP, 2000, Me, 9x.
6.Click hereYou can no longer access the CD drive or the DVD drive.
7.click here Drive Not Recognized By Roxio, PX Engine 3_00_58a. Old Version<-> EMC 7.5 Up PX Engine 4.18.16a. Update .Click here
8.Click here How to uninstall IE 7 and WMP 11.
9.Click here ImgBurn Current version: 2.5.3.0 (5,262 KB) CD / DVD / HD DVD / Blu-ray burning application
10.Click here InfoTool (Drive, Disk, Configuration, Software, Hardware, DMA settings, etc.).
11.Click here. Complete Uninstall of Creator 2011 & Creator 2012
12.Click here. Complete Uninstall of Creator 2009 and 2010 (Windows Vista and 7)
13.Click here Complete Uninstall of Creator 2009 and 2010 (Windows XP)
14.Click here Complete Uninstall of Easy Media Creator 9 & 10 on Windows Vista
15.Click here Complete Uninstall of Easy Media Creator 7.5, 8, 9, & 10 on Windows XP
16. Click here WinZip Data Compression Utility <> Click here WinRAR Data Compression Utility Click here 7-Zip Data Compression Utility
17. Click here Finding Your Computer Specs And Roxio Software Version Number.
#3
Kenny Mike
-
- Members
-
- 7 posts
Newbie
Posted 30 October 2009 - 11:02 AM
OK... now it is going to look like I'm talking to myself... and I am... I found a 'roll back to old driver' option... did that... and now Roxio recognizes the USB 2861 Capture Device... but... the auto tool appears to be adjusting the levels... but on playback all that is going into my laptop is an extremely loud buzzing sound and no music... the $80 I spent on this software is really starting to look cheap when compared to the personal hours it is taking my to get it up and running!!! I had Roxio 7 on an old desktop and never had these problems...
I'm on Vista Home Basic SP2
I got my C2009 SE at Sam's... it came with two discs... an installation DVD and the Roxio Video Capture USB CD
QUOTE (cdanteek @ Oct 30 2009, 11:49 AM) <{POST_SNAPBACK}>
Wish you came here before spending $ on that!
What operating system are you running Creator 2009 on?
Are you sure you have C2009 software?
cd
What operating system are you running Creator 2009 on?
Are you sure you have C2009 software?
cd
I'm on Vista Home Basic SP2
I got my C2009 SE at Sam's... it came with two discs... an installation DVD and the Roxio Video Capture USB CD
#4
Kenny Mike
-
- Members
-
- 7 posts
Newbie
Posted 30 October 2009 - 12:01 PM
My Bad... the radical static was because I switched the AC adapter on the phono pre-amp unit I'm using... I'm almost good to go... I just need to find a proper ground to get rid of the minor his I'm getting...
Sorry for the crazy posts... the stock market is also messing with my head!
Sorry for the crazy posts... the stock market is also messing with my head!
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
