I finished preparing my slide show and now I burned it on my disc. Everything was going well until the end. It stopped processing at 97%. It was like it froze. A message came up saying this: VIDEO WAVE 12 IS NOT RESPONDING. So far I have even deleted Roxio out of my computer and re-installed it. That didn't help. I even went to the control panel and selected the repair process. That didn't help either. I am not that computer literate to understand what this Video Wave 12 problem is. I really need a solution to fix this because I have other slide shows that I need to complete. Please assist in this matter.
1
Videowave rendering problem
Started by
RUDOLF
, Jun 11 2011 06:12 PM
5 replies to this topic
#2
myguggi
-
- Digital Guru
-
- 18,381 posts
Digital Guru
- Gender:Male
Posted 11 June 2011 - 08:01 PM
RUDOLF, on 11 June 2011 - 06:12 PM, said:
I finished preparing my slide show and now I burned it on my disc. Everything was going well until the end. It stopped processing at 97%. It was like it froze. A message came up saying this: VIDEO WAVE 12 IS NOT RESPONDING. So far I have even deleted Roxio out of my computer and re-installed it. That didn't help. I even went to the control panel and selected the repair process. That didn't help either. I am not that computer literate to understand what this Video Wave 12 problem is. I really need a solution to fix this because I have other slide shows that I need to complete. Please assist in this matter.
Read this and then come back and give us some information.
Walt
Dell Dimension 4500S;Windows XP Home Edition SP3; IntelŪ PentiumŪ 4 CPU 2.00GHz, 784MB RAM
(NVIDIA GeForce FX 5200, 128 MB memory disabled because of failure)
IntelŪ 82845G/GL/GE/PE/GV Graphics Controller; DirectX 9.0c (4.09.0000.0904)
SoundMAX Digital Audio
SamsunG CDR/DVD-ROm SM 332B
HLDS GSA-5120D External LG Super-Multi ReWriter
WDC WD400BB-75DEA0, 40 GB HD; Prolific PL3507 Combo External Hard Drive, 80 GB; Maxtor 6 L200R0 USB Hard Drive, 250GB
HP Pavilion dv6 Notebook; Intel Duo CPU 64 bit, T6400 @ 2.0Ghz; 4.0 GB RAM; Vista Home Premium 64bit
Toshiba MK3252GSX ATA 286GB hard drive; HL-DT-ST DVDRAM GSA-T50L ATA burner
Intel 4Series Express Chipset
#3
Jim_Hardin
-
- Digital Guru
-
- 25,371 posts
Digital Guru
- Gender:Male
Posted 12 June 2011 - 03:07 AM
That one does get a little frustrating because it just stops 
You are going to have to change something to get past this!
But as Walt points out, there are 3 different programs that you could have been using, so without more details no one can offer any suggestions yet
You are going to have to change something to get past this!
But as Walt points out, there are 3 different programs that you could have been using, so without more details no one can offer any suggestions yet
#4
RUDOLF
-
- Members
-
- 2 posts
Newbie
Posted 12 June 2011 - 04:45 AM
When doing my slideshow, the burning process only goes to 97%. It never reaches finished at 100%. I get a message that VIDEO WAVE 12 IS NOT RESPONDING. I have deleted Roxio and re-installed it, had Roxio repaired and none of these procedures worked. I have no idea what this Video Wave 12 is all about but need to get it fixed. I have other programs that I need to do. Please help me get this fixed.
#5
sknis
-
- Digital Guru
-
- 22,959 posts
Digital Guru
- Gender:Male
Posted 12 June 2011 - 04:58 AM
RUDOLF, on 12 June 2011 - 04:45 AM, said:
When doing my slideshow, the burning process only goes to 97%. It never reaches finished at 100%. I get a message that VIDEO WAVE 12 IS NOT RESPONDING. I have deleted Roxio and re-installed it, had Roxio repaired and none of these procedures worked. I have no idea what this Video Wave 12 is all about but need to get it fixed. I have other programs that I need to do. Please help me get this fixed.
Rudolf, You already have one post going on this and if you start another, it will result in bad feelings since people may answer in one and then find out you have the other. The obvious question is " Did you do what was suggested in the other thread'? You have not provided enough information for us to help. Go to the other thread and post the information requested.
How long did you wait for the program to respond after it reached 97%. Remember those are NOT true percentages but only a guide. If it read 97%, it could actually be closer to 80% depending on what the program is actually doing.
Regardless of what I say about computer maintenance, there is no need to defrag a solid state hard drive.
PC Windows 7 Ultimate 64bit
Velocity Micro ProMagix ©HD 60; evga x58 motherboard, Intel i7 @2.93, 12G RAM, EVGA Nvidia 560TI superclocked video card, SoundBlaster X-Fi Xtreme audio card, Buffalo external blu-ray burner; Creator 2012. PhotoShow 6, VHS to DVD 3Plus.
Laptop - Windows 7 Home
Dell XPS 1645, Intel I7 1,6G with overdrive ,4G RAM, 1 GB ATI Mobility Radeon HD 5730, Sound Blaster X-Fi MB Panzer, 500G hard drive.
Apple =OSX 10.5
MacBook Pro; 15.4-inch widescreen display, 2.4GHz Intel Core 2 Duo, 2GB memory, 200GB hard drive, 8x SuperDrive (DVD±R DL/DVD±RW/CD-RW), NVIDIA GeForce 8600M GT with 256MB of GDDR3 memory. ILife 08, Toast 10, Final Cut Express 4 and Photoshop 4.
PC Windows 7 Ultimate 64bit
Velocity Micro ProMagix ©HD 60; evga x58 motherboard, Intel i7 @2.93, 12G RAM, EVGA Nvidia 560TI superclocked video card, SoundBlaster X-Fi Xtreme audio card, Buffalo external blu-ray burner; Creator 2012. PhotoShow 6, VHS to DVD 3Plus.
Laptop - Windows 7 Home
Dell XPS 1645, Intel I7 1,6G with overdrive ,4G RAM, 1 GB ATI Mobility Radeon HD 5730, Sound Blaster X-Fi MB Panzer, 500G hard drive.
Apple =OSX 10.5
MacBook Pro; 15.4-inch widescreen display, 2.4GHz Intel Core 2 Duo, 2GB memory, 200GB hard drive, 8x SuperDrive (DVD±R DL/DVD±RW/CD-RW), NVIDIA GeForce 8600M GT with 256MB of GDDR3 memory. ILife 08, Toast 10, Final Cut Express 4 and Photoshop 4.
#6
Jim_Hardin
-
- Digital Guru
-
- 25,371 posts
Digital Guru
- Gender:Male
Posted 12 June 2011 - 06:48 AM
RUDOLF, on 12 June 2011 - 04:45 AM, said:
When doing my slideshow, the burning process only goes to 97%. It never reaches finished at 100%. I get a message that VIDEO WAVE 12 IS NOT RESPONDING. I have deleted Roxio and re-installed it, had Roxio repaired and none of these procedures worked. I have no idea what this Video Wave 12 is all about but need to get it fixed. I have other programs that I need to do. Please help me get this fixed.
simply reapeating, 'don't work' is telling us nothing.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
