EMC8 Wont Autoplay Twin DVD RW Drives
#1
Posted 01 August 2006 - 03:04 PM
#2
Posted 01 August 2006 - 04:04 PM
Do you wanna hear me beg you to take me back?
I'd gladly do it because....."
Terry
AMD Athlon II X4 640 3.0Ghz processor
ASUS M4A88T-M/USB3 Motherboard w/VIA 8 channel sound
Power Color ATI HD5550 512mb DDR3 video card
4Gb DDR3 10666 memory
1Tb Hitachi SATA hard drive
(2) Lite-On iHAS224-06 SATA DVD drives
Rosewill Destroyer case
Dell DX-20A6Q QFlix DVD burner
Cambridge Soundworks THX 5.1 speaker system
I-inc iH-252HPB 25" widescreen monitor connected via HDMI
Dell 1100 Laser printer
Roxio USB Capture Device
Windows 7 OS
#3
Posted 01 August 2006 - 06:35 PM
tbrewst, on Aug 1 2006, 07:04 PM, said:
In addition to what Terry said, PC-Cillin has been know to cause problems with the software, but I always thought it was only during the install. Disable it, and see if it helps. But dump the InCD, and try, first.
GrandpaBruce
Vietnam Vet - 1970 - 1971
Main System:
ASUS P6T Deluxe V2 LGA 1366 Intel X58 ATX Intel Motherboard; Cooler Master ATCS 840 Case
Intel Core i7 920 Nehalem 2.66GHz 4 x 256KB L2 Cache 8MB L3 Cache LGA 1366 130W Quad-Core Processor
CORSAIR DOMINATOR 3GB (3 x 1GB) 240-Pin DDR3 SDRAM DDR3 1866
PLEXTOR Black DVD Burner, Model PX-880SA; Pioneer Black 8X BD-R 2X BD-RE 16X DVD+R Burner
XFX HD-489A-ZDFC Radeon HD 4890 1GB Video Card
Creative Sound Blaster X-Fi Titanium Fatal1ty Champion Series Sound Card
Windows XP Pro w/SP3
Backup Computer:
ASUS A8N32-SLI Deluxe
Windows 7 Pro w/SP1
#4
Posted 01 August 2006 - 09:30 PM
grandpabruce, on Aug 1 2006, 07:35 PM, said:
Thanks for the advice. I had EMC5 and knew of problems with D T D and I don't install it.( I just use Creator Classic). My Nero does have InCD loaded. I'll try shutting off PC Cillin. But again, I find it odd that there is no problem with the drive or My Computer freezing 20 minutes when I have one of the two identical internal writers disconnected!
#5
Posted 02 August 2006 - 04:01 AM
Quote
What one do you disconnect and you have no problem?
Are the two drives set as cable select, or one as master and one as slave, on the same IDE channel?
Could you move one to another IDE channel?
How does Nero and EMC8 see the drives, Drive Instance ID ( Location)0/0, 1/1. and does device manager do the same?
Sorry, I would never have two identical drives on the same pc. Just to update the firmware one should uninstall one boot down disconnect one. Re-pin the connected one as master, boot up flash the firmware, reboot for the flash, uninstall that one, shutdown, unhook it re pin the other as master connect it up. Boot up flash that one, reboot for the flash, uninstall that one, shut down. Then re-pin both and reconnect both drives!
Even if the drives were on different IDE channels. I would uninstall one and disconnect it and flash one at a time.
cdanteek
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
My Computer Specs click show.
1.Click here Beginners Guide - Blank DVD Media Type Definitions & What A Firmware Upgrade Is for Your Burner.
2.Click here Firmware HQ - site dedicated to providing you with the latest firmware releases for your optical disc drives.
3.Click here CD-DVD Speed
4.Click here CD-DVD Speed - A user guide
5.Click here Enabling/Checking DMA in Windows Vista, XP, 2000, Me, 9x.
6.Click hereYou can no longer access the CD drive or the DVD drive.
7.click here Drive Not Recognized By Roxio, PX Engine 3_00_58a. Old Version<-> EMC 7.5 Up PX Engine 4.18.16a. Update .Click here
8.Click here How to uninstall IE 7 and WMP 11.
9.Click here ImgBurn Current version: 2.5.3.0 (5,262 KB) CD / DVD / HD DVD / Blu-ray burning application
10.Click here InfoTool (Drive, Disk, Configuration, Software, Hardware, DMA settings, etc.).
11.Click here. Complete Uninstall of Creator 2011 & Creator 2012
12.Click here. Complete Uninstall of Creator 2009 and 2010 (Windows Vista and 7)
13.Click here Complete Uninstall of Creator 2009 and 2010 (Windows XP)
14.Click here Complete Uninstall of Easy Media Creator 9 & 10 on Windows Vista
15.Click here Complete Uninstall of Easy Media Creator 7.5, 8, 9, & 10 on Windows XP
16. Click here WinZip Data Compression Utility <> Click here WinRAR Data Compression Utility Click here 7-Zip Data Compression Utility
17. Click here Finding Your Computer Specs And Roxio Software Version Number.
#6
Posted 02 August 2006 - 05:13 PM
cdanteek, on Aug 2 2006, 05:01 AM, said:
Are the two drives set as cable select, or one as master and one as slave, on the same IDE channel?
Could you move one to another IDE channel?
How does Nero and EMC8 see the drives, Drive Instance ID ( Location)0/0, 1/1. and does device manager do the same?
Sorry, I would never have two identical drives on the same pc. Just to update the firmware one should uninstall one boot down disconnect one. Re-pin the connected one as master, boot up flash the firmware, reboot for the flash, uninstall that one, shutdown, unhook it re pin the other as master connect it up. Boot up flash that one, reboot for the flash, uninstall that one, shut down. Then re-pin both and reconnect both drives!
Even if the drives were on different IDE channels. I would uninstall one and disconnect it and flash one at a time.
cdanteek
Thanks again,Bruce, Terry,cdanteek and all who contribute to these forums!
#7
Posted 02 August 2006 - 05:42 PM
Do you wanna hear me beg you to take me back?
I'd gladly do it because....."
Terry
AMD Athlon II X4 640 3.0Ghz processor
ASUS M4A88T-M/USB3 Motherboard w/VIA 8 channel sound
Power Color ATI HD5550 512mb DDR3 video card
4Gb DDR3 10666 memory
1Tb Hitachi SATA hard drive
(2) Lite-On iHAS224-06 SATA DVD drives
Rosewill Destroyer case
Dell DX-20A6Q QFlix DVD burner
Cambridge Soundworks THX 5.1 speaker system
I-inc iH-252HPB 25" widescreen monitor connected via HDMI
Dell 1100 Laser printer
Roxio USB Capture Device
Windows 7 OS
#8
Posted 02 August 2006 - 05:57 PM
tbrewst, on Aug 2 2006, 06:42 PM, said:
#9
Posted 02 August 2006 - 06:00 PM
bigbird737, on Aug 2 2006, 08:13 PM, said:
Thanks again,Bruce, Terry,cdanteek and all who contribute to these forums!
You are welcome, Bird. These forums are a wealth of information, but a lot more was lost when they changed boards, back in January.
GrandpaBruce
Vietnam Vet - 1970 - 1971
Main System:
ASUS P6T Deluxe V2 LGA 1366 Intel X58 ATX Intel Motherboard; Cooler Master ATCS 840 Case
Intel Core i7 920 Nehalem 2.66GHz 4 x 256KB L2 Cache 8MB L3 Cache LGA 1366 130W Quad-Core Processor
CORSAIR DOMINATOR 3GB (3 x 1GB) 240-Pin DDR3 SDRAM DDR3 1866
PLEXTOR Black DVD Burner, Model PX-880SA; Pioneer Black 8X BD-R 2X BD-RE 16X DVD+R Burner
XFX HD-489A-ZDFC Radeon HD 4890 1GB Video Card
Creative Sound Blaster X-Fi Titanium Fatal1ty Champion Series Sound Card
Windows XP Pro w/SP3
Backup Computer:
ASUS A8N32-SLI Deluxe
Windows 7 Pro w/SP1
#10
Posted 02 August 2006 - 06:26 PM
Quote
bigbird737,
I have seen where right click open in my computer, launches Sonic CinePlayer.
I would ditch the auto play function in windows. In control panel,Administrative Tools, Services. Search for IMAPI CD Burning Com Service and highlight it, right click properties, on the general tab, startup type, set to manual.
Disable In CD in msconfig, and reboot. Check the box don't show me again on startup.
See if your drive recognition woes are better.
Play a DVD in WMP and go to file , properties and see what audio codec and video codec is used.
cdanteek
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
My Computer Specs click show.
1.Click here Beginners Guide - Blank DVD Media Type Definitions & What A Firmware Upgrade Is for Your Burner.
2.Click here Firmware HQ - site dedicated to providing you with the latest firmware releases for your optical disc drives.
3.Click here CD-DVD Speed
4.Click here CD-DVD Speed - A user guide
5.Click here Enabling/Checking DMA in Windows Vista, XP, 2000, Me, 9x.
6.Click hereYou can no longer access the CD drive or the DVD drive.
7.click here Drive Not Recognized By Roxio, PX Engine 3_00_58a. Old Version<-> EMC 7.5 Up PX Engine 4.18.16a. Update .Click here
8.Click here How to uninstall IE 7 and WMP 11.
9.Click here ImgBurn Current version: 2.5.3.0 (5,262 KB) CD / DVD / HD DVD / Blu-ray burning application
10.Click here InfoTool (Drive, Disk, Configuration, Software, Hardware, DMA settings, etc.).
11.Click here. Complete Uninstall of Creator 2011 & Creator 2012
12.Click here. Complete Uninstall of Creator 2009 and 2010 (Windows Vista and 7)
13.Click here Complete Uninstall of Creator 2009 and 2010 (Windows XP)
14.Click here Complete Uninstall of Easy Media Creator 9 & 10 on Windows Vista
15.Click here Complete Uninstall of Easy Media Creator 7.5, 8, 9, & 10 on Windows XP
16. Click here WinZip Data Compression Utility <> Click here WinRAR Data Compression Utility Click here 7-Zip Data Compression Utility
17. Click here Finding Your Computer Specs And Roxio Software Version Number.
#11
Posted 05 September 2006 - 04:38 AM
bigbird737, on Aug 1 2006, 03:04 PM, said:
Please try and let us know what happens.
It seems many are having this problem.
With thanks
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users





