Jump to content

Roxio Community

Roxio Video Lab Hd Won't Convert Right.


  • Please log in to reply
18 replies to this topic

#1 rdycrz

rdycrz

    Newbie

  • Members
  • Pip
  • 7 posts

Posted 30 November 2011 - 07:56 PM

I recently ripped a DVD and I ripped several episodes. I checked each of the ripped and unconverted files on VLC and they were working perfectly fine. I then used Roxio Video Lab HD to convert them to iPhone format, when I opened the finished videos, I immediately noticed that the audio was late. It was about five seconds late, it was like this on all the videos I converted. I have used this program and have never encountered this problem before. I reconverted them twice and I still had this problem. Has this happened to anyone else, can anyone please help me?

#2 Jim_Hardin

Jim_Hardin

    Digital Guru

  • Digital Guru
  • PipPipPipPipPipPip
  • 34,337 posts
  • Gender:Male

Posted 01 December 2011 - 05:15 AM

??? if it were a legal, non-copy writed DVD, you could simply Import it to and make your converted export <_<

When you say you are 'ripping' it, I get the feeling you are using illgal software to break a copy writed DVD...

Soooo, assuming you know all that and would never do anything illegal what settings are you using for the output?

Also check the settings of the Source files.
Posted Image

#3 rdycrz

rdycrz

    Newbie

  • Members
  • Pip
  • 7 posts

Posted 01 December 2011 - 01:54 PM

I have used this DVD before and converted them before with no problems, but they were accidentally deleted. I did everything exactly the same as before. I don't know why this happened. The settings I used are

Compression: MPEG4
Resolution: 640x360[16:9]
Frame Rate: 30 fps
Data Rate: 500 kbps
Audio Format: AAC
Sampling Rate: 48 KHZ
Sample Size: 16 bits
Channels: Stereo

#4 Jim_Hardin

Jim_Hardin

    Digital Guru

  • Digital Guru
  • PipPipPipPipPipPip
  • 34,337 posts
  • Gender:Male

Posted 02 December 2011 - 03:52 AM

These are the settings you are using???

Attached File  Image1.jpg   173.64K   0 downloads

Attached File  Image2.jpg   54.07K   0 downloads


I really suspect that it is the Source file... Grab another file you can find on your PC to use as a test.

Trim it to 5 minutes or so in length then convert it and see what it does?

Just so you know, the usual reccomendations in a case like this would be:

Do the Prep Steps to the letter!

Then start the install of the Suite, only pick Repair when it is offered.

Updates to Roxio will have to be installed. ;)


Posted Image

#5 rdycrz

rdycrz

    Newbie

  • Members
  • Pip
  • 7 posts

Posted 02 December 2011 - 06:19 PM

First of all, I want to say thanks for helping out, and also I made an error, I'm not using Roxio Video Lab HD, I'm actually using Easy Video Copy & Convert, I saw your screen shots and realized my mistake and I'm using the converter included. I downloaded a free and crappy converter that converted them but made them really bad and with a watermark. I don't care for that converted file, I just used it to test the videos and they came out right. I know its not the source file. Thanks for all help and here is the program I've been using.
Thanks

Attached Files



#6 Jim_Hardin

Jim_Hardin

    Digital Guru

  • Digital Guru
  • PipPipPipPipPipPip
  • 34,337 posts
  • Gender:Male

Posted 03 December 2011 - 03:46 AM

Not a problem ~ I don't actually have the Roxio Video Lab HD Suite, so I am just using the Creator Suite and making assumptions (guesses) :lol:

VCC and VideoWave should yield the same results...

Attached File  Image1.jpg   137.29K   0 downloads


Still, if you do one of your files in VideoWave just to see how it comes out... I am curious.
Posted Image

#7 rdycrz

rdycrz

    Newbie

  • Members
  • Pip
  • 7 posts

Posted 03 December 2011 - 02:28 PM

Hi, I used the same files to convert again and they came out correctly. I don't know what happened, but it's fixed now. I also noticed that on your screen shot from Roxio Video Copy & Convert, under Choose Output it says Category: Apple and shows iPad, iPad 2, and iPod touch 4. I'm using this for my iPad 2 and 4th Gen iPod touch. How do I make it show those options. I'm going to include a picture or my program.
Thanks

Attached Files



#8 cdanteek

cdanteek

    Digital Guru

  • Digital Guru
  • PipPipPipPipPipPip
  • 25,094 posts
  • Gender:Male
  • Location:Prairie Rapids Crossing.

Posted 03 December 2011 - 03:03 PM

View Postrdycrz, on 03 December 2011 - 02:28 PM, said:

Hi, I used the same files to convert again and they came out correctly. I don't know what happened, but it's fixed now. I also noticed that on your screen shot from Roxio Video Copy & Convert, under Choose Output it says Category: Apple and shows iPad, iPad 2, and iPod touch 4. I'm using this for my iPad 2 and 4th Gen iPod touch. How do I make it show those options. I'm going to include a picture or my program.
Thanks


Jim said in the previous post!

Quote

I don't actually have the Roxio Video Lab HD Suite, so I am just using the Creator Suite and making assumptions (guesses)

I would bet Jim is using Roxio Creator 2012 Pro and it shows those options.
cd
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
My Computer Specs click show.
Spoiler

1.Click here   Beginners Guide - Blank DVD Media Type Definitions & What A Firmware Upgrade Is for Your Burner.
2.Click here Firmware HQ - site  dedicated to providing you with the latest firmware releases for your optical disc drives.  
3.Click here CD-DVD Speed
4.Click here CD-DVD Speed - A user guide
5.Click here Enabling/Checking DMA in Windows Vista, XP, 2000, Me, 9x.
6.Click hereYou can no longer access the CD drive or the DVD drive.
7.Click here Drive Not Recognized By Roxio, PX Engine 3_00_58a. Old Version<-> EMC 7.5 Up  PX Engine 4.18.16a. Update .Click here  PX Engine Fix, Click here The Latest 4.10.28a Click here
8.Click here  How to uninstall IE 7 and WMP 11.
9.Click here ImgBurn Current version: v2.5.8.0 (3,389 KB)  CD / DVD / HD DVD / Blu-ray burning application
10.Click here InfoTool  (Drive, Disk, Configuration, Software, Hardware, DMA settings, etc.).
11.Click here   Complete Uninstall of Creator 2011 & Creator 2012
12.Click here Complete Uninstall of Creator 2009 and 2010 (Windows Vista and 7)
13.Click here Complete Uninstall of Creator 2009 and 2010 (Windows XP)
14.Click here Complete Uninstall of Easy Media Creator 9 & 10 on Windows Vista  
15.Click here Complete Uninstall of Easy Media Creator 7.5,  8, 9, & 10 on Windows XP
16. Click here WinZip Data Compression Utility <>  Click here WinRAR Data Compression Utility   Click here 7-Zip Data Compression Utility
17. Click here Finding Your Computer Specs And Roxio Software Version Number.

E-mail spambots harvest e-mail addresses from material found on the Internet in order to build mailing lists for sending unsolicited e-mail, also known as spam. Such spambots are web crawlers that can gather e-mail addresses from Web sites, newsgroups, special-interest group (SIG) postings, and chat-room conversations. .

Do not post your email address on any public forum!  

#9 rdycrz

rdycrz

    Newbie

  • Members
  • Pip
  • 7 posts

Posted 03 December 2011 - 03:18 PM

View Postrdycrz, on 02 December 2011 - 06:19 PM, said:

First of all, I want to say thanks for helping out, and also I made an error, I'm not using Roxio Video Lab HD, I'm actually using Easy Video Copy & Convert, I saw your screen shots and realized my mistake and I'm using the converter included. I downloaded a free and crappy converter that converted them but made them really bad and with a watermark. I don't care for that converted file, I just used it to test the videos and they came out right. I know its not the source file. Thanks for all help and here is the program I've been using.Thanks


I saw his screen shot Roxio VC&C and I'm using that also, that's why I asked. I was aware he said he wasn't using Roxio Video Lab HD.
Neither am I.

#10 cdanteek

cdanteek

    Digital Guru

  • Digital Guru
  • PipPipPipPipPipPip
  • 25,094 posts
  • Gender:Male
  • Location:Prairie Rapids Crossing.

Posted 03 December 2011 - 03:25 PM

View Postrdycrz, on 03 December 2011 - 03:18 PM, said:

I saw his screen shot Roxio VC&C and I'm using that also, that's why I asked. I was aware he said he wasn't using Roxio Video Lab HD.
Neither am I.


Your using Easy Video Copy & Convert?

Quote

I'm actually using Easy Video Copy & Convert,

I would bet Jim is using Roxio Creator 2012 Pro, application Video Copy and Convert and it shows those options.

Does that explain it better?
cd
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
My Computer Specs click show.
Spoiler

1.Click here   Beginners Guide - Blank DVD Media Type Definitions & What A Firmware Upgrade Is for Your Burner.
2.Click here Firmware HQ - site  dedicated to providing you with the latest firmware releases for your optical disc drives.  
3.Click here CD-DVD Speed
4.Click here CD-DVD Speed - A user guide
5.Click here Enabling/Checking DMA in Windows Vista, XP, 2000, Me, 9x.
6.Click hereYou can no longer access the CD drive or the DVD drive.
7.Click here Drive Not Recognized By Roxio, PX Engine 3_00_58a. Old Version<-> EMC 7.5 Up  PX Engine 4.18.16a. Update .Click here  PX Engine Fix, Click here The Latest 4.10.28a Click here
8.Click here  How to uninstall IE 7 and WMP 11.
9.Click here ImgBurn Current version: v2.5.8.0 (3,389 KB)  CD / DVD / HD DVD / Blu-ray burning application
10.Click here InfoTool  (Drive, Disk, Configuration, Software, Hardware, DMA settings, etc.).
11.Click here   Complete Uninstall of Creator 2011 & Creator 2012
12.Click here Complete Uninstall of Creator 2009 and 2010 (Windows Vista and 7)
13.Click here Complete Uninstall of Creator 2009 and 2010 (Windows XP)
14.Click here Complete Uninstall of Easy Media Creator 9 & 10 on Windows Vista  
15.Click here Complete Uninstall of Easy Media Creator 7.5,  8, 9, & 10 on Windows XP
16. Click here WinZip Data Compression Utility <>  Click here WinRAR Data Compression Utility   Click here 7-Zip Data Compression Utility
17. Click here Finding Your Computer Specs And Roxio Software Version Number.

E-mail spambots harvest e-mail addresses from material found on the Internet in order to build mailing lists for sending unsolicited e-mail, also known as spam. Such spambots are web crawlers that can gather e-mail addresses from Web sites, newsgroups, special-interest group (SIG) postings, and chat-room conversations. .

Do not post your email address on any public forum!  

#11 grandpabruce

grandpabruce

    Digital Guru

  • Digital Guru
  • PipPipPipPipPipPip
  • 21,350 posts
  • Gender:Male

Posted 03 December 2011 - 03:27 PM

View Postrdycrz, on 03 December 2011 - 03:18 PM, said:

I saw his screen shot Roxio VC&C and I'm using that also, that's why I asked. I was aware he said he wasn't using Roxio Video Lab HD.
Neither am I.

So what program suite are you using?  I don't remember a stand alone Video Copy and Convert software, but it wouldn't shock me that Roxio did offer it as a stand alone.
Life is good!
GrandpaBruce
Vietnam Vet - 1970 - 1971

Main System:
ASUS P6T Deluxe V2 LGA 1366 Intel X58 ATX Intel Motherboard; Cooler Master ATCS 840 Case
Intel Core i7 920 Nehalem 2.66GHz 4 x 256KB L2 Cache 8MB L3 Cache LGA 1366 130W Quad-Core Processor
CORSAIR DOMINATOR 3GB (3 x 1GB) 240-Pin DDR3 SDRAM DDR3 1866
PLEXTOR Black DVD Burner, Model PX-880SA; Pioneer Black 8X BD-R 2X BD-RE 16X DVD+R Burner
EVGA GEFORCE GTX 670 2GB Video Card
Creative Sound Blaster X-Fi Titanium Fatal1ty Champion Series Sound Card
Windows XP Pro w/SP3

Backup Computer:
ASUS A8N32-SLI Deluxe
Windows 7 Pro w/SP1

#12 cdanteek

cdanteek

    Digital Guru

  • Digital Guru
  • PipPipPipPipPipPip
  • 25,094 posts
  • Gender:Male
  • Location:Prairie Rapids Crossing.

Posted 03 December 2011 - 03:32 PM

Attached File  12-3-2011 5-30-05 PM.jpg   119.71K   0 downloads
cd
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
My Computer Specs click show.
Spoiler

1.Click here   Beginners Guide - Blank DVD Media Type Definitions & What A Firmware Upgrade Is for Your Burner.
2.Click here Firmware HQ - site  dedicated to providing you with the latest firmware releases for your optical disc drives.  
3.Click here CD-DVD Speed
4.Click here CD-DVD Speed - A user guide
5.Click here Enabling/Checking DMA in Windows Vista, XP, 2000, Me, 9x.
6.Click hereYou can no longer access the CD drive or the DVD drive.
7.Click here Drive Not Recognized By Roxio, PX Engine 3_00_58a. Old Version<-> EMC 7.5 Up  PX Engine 4.18.16a. Update .Click here  PX Engine Fix, Click here The Latest 4.10.28a Click here
8.Click here  How to uninstall IE 7 and WMP 11.
9.Click here ImgBurn Current version: v2.5.8.0 (3,389 KB)  CD / DVD / HD DVD / Blu-ray burning application
10.Click here InfoTool  (Drive, Disk, Configuration, Software, Hardware, DMA settings, etc.).
11.Click here   Complete Uninstall of Creator 2011 & Creator 2012
12.Click here Complete Uninstall of Creator 2009 and 2010 (Windows Vista and 7)
13.Click here Complete Uninstall of Creator 2009 and 2010 (Windows XP)
14.Click here Complete Uninstall of Easy Media Creator 9 & 10 on Windows Vista  
15.Click here Complete Uninstall of Easy Media Creator 7.5,  8, 9, & 10 on Windows XP
16. Click here WinZip Data Compression Utility <>  Click here WinRAR Data Compression Utility   Click here 7-Zip Data Compression Utility
17. Click here Finding Your Computer Specs And Roxio Software Version Number.

E-mail spambots harvest e-mail addresses from material found on the Internet in order to build mailing lists for sending unsolicited e-mail, also known as spam. Such spambots are web crawlers that can gather e-mail addresses from Web sites, newsgroups, special-interest group (SIG) postings, and chat-room conversations. .

Do not post your email address on any public forum!  

#13 grandpabruce

grandpabruce

    Digital Guru

  • Digital Guru
  • PipPipPipPipPipPip
  • 21,350 posts
  • Gender:Male

Posted 03 December 2011 - 03:36 PM

View Postcdanteek, on 03 December 2011 - 03:32 PM, said:


Thanks for that CD.  I didn't see it on Roxio's main website.  Is the OP using a stand alone software?
Life is good!
GrandpaBruce
Vietnam Vet - 1970 - 1971

Main System:
ASUS P6T Deluxe V2 LGA 1366 Intel X58 ATX Intel Motherboard; Cooler Master ATCS 840 Case
Intel Core i7 920 Nehalem 2.66GHz 4 x 256KB L2 Cache 8MB L3 Cache LGA 1366 130W Quad-Core Processor
CORSAIR DOMINATOR 3GB (3 x 1GB) 240-Pin DDR3 SDRAM DDR3 1866
PLEXTOR Black DVD Burner, Model PX-880SA; Pioneer Black 8X BD-R 2X BD-RE 16X DVD+R Burner
EVGA GEFORCE GTX 670 2GB Video Card
Creative Sound Blaster X-Fi Titanium Fatal1ty Champion Series Sound Card
Windows XP Pro w/SP3

Backup Computer:
ASUS A8N32-SLI Deluxe
Windows 7 Pro w/SP1

#14 Larry

Larry

    Digital Guru

  • Digital Guru
  • PipPipPipPipPipPip
  • 11,230 posts

Posted 03 December 2011 - 03:37 PM

Or it could be this:
http://www.roxio.com...r/overview.html (or the earlier v3 one) that Roxioi has had available for a number of years.

Edited by Larry, 03 December 2011 - 03:39 PM.

Larry
Registered Member Creator 2010 Pro, Creator 2009 Ultimate, EMC 10, 9, 8 Deluxe, 7.5, 7, ECDC 6,5,4

Dell Precision WorkStation 450 / 2 - Intel Xeon 2.80ghz CPU w/HT, 512mb L2 Cache, 533mhz Bus / 2gb RAM / 1800gb+ HDD's / NVIDIA GeForce 6200 / Lite-On 165H6S CD DVD+/- DVD+/-DL /  Plextor PX-708UF /
Hauppage WinTV HVR-950Q / Hauppage WinTV PVR PCI II 250 / Hauppage WinTV PVR USB2 / XP Pro SP3 / Windows 7

#15 rdycrz

rdycrz

    Newbie

  • Members
  • Pip
  • 7 posts

Posted 03 December 2011 - 03:41 PM

I'm using the Roxio VC&C application from Roxio Easy Video Copy & Convert. The same one as the picture from cdanteek

#16 Brendon

Brendon

    Digital Guru

  • Digital Guru
  • -8,382,245 posts
  • Gender:Male
  • Location:Christchurch, N.Z.

Posted 03 December 2011 - 05:02 PM

View Postrdycrz, on 03 December 2011 - 03:41 PM, said:

I'm using the Roxio VC&C application from Roxio Easy Video Copy & Convert. The same one as the picture from cdanteek

That's a cut-down, stand-alone [cheap] version which doesn't have half the things which you'll find in the $100 Creator 2012. :(
P4 @3.20GHz on Albatron PX-865PE Pro II with 2GB DDR-SDRAM, FX5900XT video, Viewsonic monitors,
BENQ DW1640, in XP Pro and Windows 7

As a very wise man told me, "You do it until . . . . ."

#17 rdycrz

rdycrz

    Newbie

  • Members
  • Pip
  • 7 posts

Posted 03 December 2011 - 05:27 PM

Oh that sucks, I bought Creator 2010 and only used it for the converter. I may have to re install iagain and see if it has all those features. I guess I'll have to go for the 2012.
Thanks for all the help.

#18 grandpabruce

grandpabruce

    Digital Guru

  • Digital Guru
  • PipPipPipPipPipPip
  • 21,350 posts
  • Gender:Male

Posted 03 December 2011 - 07:54 PM

View Postrdycrz, on 03 December 2011 - 05:27 PM, said:

Oh that sucks, I bought Creator 2010 and only used it for the converter. I may have to re install iagain and see if it has all those features. I guess I'll have to go for the 2012.
Thanks for all the help.
\

If you want the conversion for your iPod Touch Generation 4, you will have to get Creator 2012.  If you have Creator 2010 installed, try the conversion for the iPod Touch, before purchasing Creator 2012.  If it works, all is good.

I have an iPod Touch Generation 4.  If I get a chance, I will try a conversion tomorrow, with Creator 2010, to see if it works.
Life is good!
GrandpaBruce
Vietnam Vet - 1970 - 1971

Main System:
ASUS P6T Deluxe V2 LGA 1366 Intel X58 ATX Intel Motherboard; Cooler Master ATCS 840 Case
Intel Core i7 920 Nehalem 2.66GHz 4 x 256KB L2 Cache 8MB L3 Cache LGA 1366 130W Quad-Core Processor
CORSAIR DOMINATOR 3GB (3 x 1GB) 240-Pin DDR3 SDRAM DDR3 1866
PLEXTOR Black DVD Burner, Model PX-880SA; Pioneer Black 8X BD-R 2X BD-RE 16X DVD+R Burner
EVGA GEFORCE GTX 670 2GB Video Card
Creative Sound Blaster X-Fi Titanium Fatal1ty Champion Series Sound Card
Windows XP Pro w/SP3

Backup Computer:
ASUS A8N32-SLI Deluxe
Windows 7 Pro w/SP1

#19 Jim_Hardin

Jim_Hardin

    Digital Guru

  • Digital Guru
  • PipPipPipPipPipPip
  • 34,337 posts
  • Gender:Male

Posted 04 December 2011 - 05:23 AM

Video Lab HD is based on components from Creator 2011... The Quick Set selection box was only added to Video Copy & Convert in Creator 2012, which I was using for screen caps ;)

Your Pic:
Attached File  Image2.jpg   97.74K   0 downloads

My Pic:

Attached File  Image3.jpg   134.76K   0 downloads


So installing Creator 2010 is not going to help...

However... You could go to the end and pick Video, then set it to do a HD output (mpeg 4) to use with your iPad 2:

Attached File  Image1a.jpg   125.28K   0 downloads


Try that and see if it doesn't give you a better conversion.

Edited by Jim_Hardin, 04 December 2011 - 05:24 AM.

Posted Image




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users