Hi every one I need some help I just installed vhs 2 Dvd it installed ok but when I try to start the program all I am getting
is a white screen with 3 boxes and top left corner say roxio with no image,If I click on the Sound editor Icon the same
white screen comes up and I have to use Task Manager to close the program.. I try to install the vhs2dvd sp2 and its
saying Software Not found roxio easy vhs2dvd could not be located on your system. Any idea whats happening...
running windows 7,
Also have easy media Creator 10 suite installed
1
Vhs 2 Dvd Wont Work After Install
Started by
bajanboy
, Feb 01 2012 07:39 PM
5 replies to this topic
#2
Jim_Hardin
-
- Digital Guru
-
- 25,370 posts
Digital Guru
- Gender:Male
Posted 02 February 2012 - 01:59 AM
EMC 10 needs to be at least 10.3 in order to work with Win7...
Can you see the USB Device using the 'Capture' in EMC 10?
There is NO service pack for the 201B Build of V2D
Look at your box and make sure you have the Win7 Compatibility logo in the lower right corner. It won't work without it
Curious what your PC specs are as far as Video Card and Settings?
Assuming you meet the specs, you will need to do the Prep Steps to the letter!
Then start the install of the Suite, only pick Repair when it is offered.
Can you see the USB Device using the 'Capture' in EMC 10?
There is NO service pack for the 201B Build of V2D
Look at your box and make sure you have the Win7 Compatibility logo in the lower right corner. It won't work without it
Curious what your PC specs are as far as Video Card and Settings?
Assuming you meet the specs, you will need to do the Prep Steps to the letter!
Then start the install of the Suite, only pick Repair when it is offered.
#3
bajanboy
-
- Members
-
- 3 posts
Newbie
Posted 02 February 2012 - 02:57 PM
Thanks for the reply Jim
so far my EMC 10 works fine with Win7
File says its RoxioVHStoDVDSP2 got if off the website
yes I can see the USB Device using the 'Capture' in EMC 10 tryed it already
yes it has the Win7 Compatibility logo in the lower right corner of the box
System
Board gigabyte ep45
video NVIDA GeForce GT240 512mb
Memory 4gigs
cpu Intel Core2 duo E7400
will update everything and let you know what happens
so far my EMC 10 works fine with Win7
File says its RoxioVHStoDVDSP2 got if off the website
yes I can see the USB Device using the 'Capture' in EMC 10 tryed it already
yes it has the Win7 Compatibility logo in the lower right corner of the box
System
Board gigabyte ep45
video NVIDA GeForce GT240 512mb
Memory 4gigs
cpu Intel Core2 duo E7400
will update everything and let you know what happens
#4
Jim_Hardin
-
- Digital Guru
-
- 25,370 posts
Digital Guru
- Gender:Male
Posted 03 February 2012 - 01:44 AM
Still a little concerned with EMC 10, typical failure is that it works for a while, then fails... Easy to check, Help - About! Is it 10.3?
1024 X 768 32bit minimum screen resolution, no way around that one
Drivers & Software for that Video Card are located HERE.
1024 X 768 32bit minimum screen resolution, no way around that one
Drivers & Software for that Video Card are located HERE.
#5
bajanboy
-
- Members
-
- 3 posts
Newbie
Posted 03 February 2012 - 03:32 AM
ok jim just check and my video driver are up to date 285.62
EMC is ver 1.0.0.44
Vhs2DvD would not uninstalled or repair just starts then says rolling back
window is up to date as well
EMC is ver 1.0.0.44
Vhs2DvD would not uninstalled or repair just starts then says rolling back
window is up to date as well
#6
Jim_Hardin
-
- Digital Guru
-
- 25,370 posts
Digital Guru
- Gender:Male
Posted 03 February 2012 - 05:11 AM
Wow! the EMC 10 has to go... It will not continue to function on a Win7 PC and will screw things up as it fails.
You did not mention your screen res??? You understand it absolutely, positively must be 1024 X 768, 32bit or Higher to work!!! No exceptions, no 'yeah buts'
2 more things:
Put in your V2D DVD and look at it in Explorer. Confirm you actually have:
Assuming you have the 201B, after you remove the EMC 10, download and install the Revo uninstaller.
Run it in MODERATE MODE to remove V2D.
Reboot and run the Prep Steps I linked to in Post #2, then Install the V2D program.
I'll keep my fingers crossed
You did not mention your screen res??? You understand it absolutely, positively must be 1024 X 768, 32bit or Higher to work!!! No exceptions, no 'yeah buts'
2 more things:
Put in your V2D DVD and look at it in Explorer. Confirm you actually have:
This One!
NOT this one!
Assuming you have the 201B, after you remove the EMC 10, download and install the Revo uninstaller.
Run it in MODERATE MODE to remove V2D.
Reboot and run the Prep Steps I linked to in Post #2, then Install the V2D program.
I'll keep my fingers crossed
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
