Jump to content

All Activity

This stream auto-updates     

  1. Today
  2. Yesterday
  3. Brendon

    BurnerState_WritingFormat failure

    AVCHD is a Blu-Ray format, isn't it? I think that if you tried to write that output to DVD you would get a "WritingFormat Failure". It could be that you'll need the Blu-Ray plugin for NXT 7 (can be purchased here) and a Blu-Ray writer to put your AVCHD to disc.
  4. As a quick test, try using a different HDMI input to your Capture unit.... (DVD player, BD player, HDMI output from your computer) .
  5. I forgot to mention this, ive tried both 1080i and 720p and matched the settings via roxio software. still doesnt work.
  6. JLC78726

    no sound on DVD

    There is audio in the MPG that VideoWave produces. There is audio in the preview of the DVD in MyDVD -- both menus and programs. It's in the DVD (or ISO) produced by MyDVD that the audio disappears. And, yes, I did burn DVDs to test this because there's audio at every stage up to the actual creation of the actual DVD. (Though DVD-RW save me from wasting media.)
  7. cdanteek

    no sound on DVD

    My Canon PowerShot A1200 .mov files have no audio in videowave either and I run them through 'Any Video Converter' freeware to fix them. I load the .mov into 'Any Video Converter' choose DVD Video NTSC Movie and convert, now I have audio in videowave. I agree you should have audio "in the menus".. You don't have to burn and waste a DVD just output, export as, to a video file to your PC and test for audio.
  8. I have tried burning a project Roxio Creator NXT 7 with MYDVD both to a DVD and ISO image using the AVCHD format and I get the BurnerState_WritingFormat failure. Reason Project_BuildToDevice() AuthorScript call failed. Code 3254845656. I have tried NXT 7 on two of my computers, using 4 different burners all with the same result. I am running Windows 10 64bit on both computers. The Titles for the MYDVD project were created in Videowave and were output as .mpg files. Can anyone give my me some help in what I am doing wrong ? I have attached a Screen Print of the error that is received.
  9. cdanteek

    Audio Capture

    My Microphone shows a red arrow pointing down 'not plugged in'. Do you have a microphone plugged in?
  10. Last week
  11. l.aloigi@villalacastellacc

    Roxio NXT 7

    Dear Brendon after Easter i chek with my tecnical frend my computer. I think the problem is probabily on drivers or codec. One of Windows updating is non correct. Maybe....... See you, and Good Easter to you and your family ciao
  12. Brendon

    Roxio NXT 7

    Buongiorno Lamberto, I have been trying for days to see the same as you, but your small sample MTS file always works properly on my machine every time. -I understand that your NXT 7 Videowave first loaded your MTS files properly, but then after a while would not load them any more. True? -you tried NXT 6 Videowave, and that first loaded your MTS files properly, but then after a while would not load them any more. True? I'm thinking that you must have the right drivers and CODECs, because Videowave loaded those files properly at the start. It looks like something is stopping the load process on your computer, after it identifies the MTS files. Here's what should happen in a second or two: -The file selector or Windows first sees how many files you have, and starts to identify them. (Shows hourglass) -Then it identifies the MTS files, and shows that MPGE symbol -Then it decodes the files (or most of them) and shows a thumbnail picture on each file. (See that 00000.MTS is your file) Questions: [1] First, NXT 7. How long did Videowave work properly before it stopped loading the MTS files? Did you change/install anything in your computer before it stopped working? [2] NXT 6. Same questions. Also, does the NXT 6 computer have same operating system as the NXT 7 one? Regards, Brendon
  13. dscott777

    Can't burn

    Running Toast 17 Pro with either High Sierra 10.13.6 of Mohave 10.14, I'm unable to burn any kind of disc -- AVCHD or standard DVD. No matter what I do, I get an error message that reads: "There's not enough free space on this disc: 118.05 GB are needed, 4.38 GB are available." This is from an ordinary Final Cut Pro-created .mov file of 21.58 GB for a 10 minute show. I've successfully done tons of them in the past. In fact, I still can easily can burn that file to either kind of disc with Toast 14 Pro. After a long Roxio "chat" that went nowhere, my query was passed along to "tech support" and they are currently pondering the problem. Over the years various versions of Toast have been my dependable backup each time an Apple software update "broke" FCP's ability to share to disc. Eventually it always gets fixed but it takes a long time. It's likely that some day a future Apple IOS update will render Toast 14 Pro unusable so I'm hoping there is a fix.
  14. HI, please help, I have been running VHS to DVD 3 plus since the Windows XP days and have gone through the updates to keep running as Windows progressed to what it is today and, up until a month or so ago it was still performing as expected, however now while recording from a TV the program will hesitate, the time will stop, and then start again, I call this stuttering. This lasts for 3 to 5 seconds then goes back to normal recording and will happen every once in a while until the recording ends. I have re-installed the program several times, re-ran the updates and patches, and still the stuttering continues, intermittently. I had another laptop so I reinstalled Windows 8 hoping it is due to Windows 10 updates that have occurred over the last couple of months, and still the same problem. Is there anyone experiencing the same problem? Is there a fix available? Any ideas what I should be looking at? any help would be greatly appreciated.
  15. aquancer

    Audio Capture

    Yes on the recording side it shows Mic, digital in and what U hear. Even when I choose what U hear as the default device it's still does not work.
  16. Try setting your PS4 output to 1080i or 720p. To configure settings ....Settings) > [Sound and Screen] > [Video Output Settings] .
  17. First off, Ive downloaded the LATEST version of the capture software. All the cables are plugged in correctly. The preview comes up on the capture software fine and shows green. Ive disabled HDCP on my PS4 ive checked the device manager and reinstalled the hardware twice. ive restarted, reinstalled the software. The weird thing is that the audio is coming through the TV but the video is not. and suggestions?
  18. REDWAGON

    Convert

    Open the Videowave program-- Add the MP4 video to a new production--add any other photos or text pages etc. and then output it to MyDVD program. (one of the options available for output) Use any of the options available in MyDVD program and then burn it to disk. (Be sure and save your videowave production) Your given name as a DMSM file.
  19. rmy

    Convert

    How do you make a DVD of an MP4 video file? I've been able to convert the file but there's only video, no audio. There is audio in the preview. What am I doing wrong?
  20. ogdens

    Audio Capture

    Does your Creative device show in your Sound options.? The pic below is how mine is
  21. aquancer

    Audio Capture

    Yes is Windows 10
  22. l.aloigi@villalacastellacc

    Roxio NXT 7

    Dear Brendon, I can't understand. I enclose the menu page where video wave takes the files. See that the file does not open and therefore does not load. I also tried on NXT 6, with the same result. But the curious thing that first opened and I could upload the MTS files. Thanks for the reply Hello Lamberto
  23. l.aloigi@villalacastellacc

    Roxio NXT 7

    Video Studio Corel 2019 download video MTS but not audio. I work with Roxio NXT 6, before accept MTS and after some time not.Incredible. My name is Lamberto and i'm italian.The MTS file are by Panasonic HC-VX 980. I converi in MP4 file for operating in Video Wave and using Trimmer Video,but is log operation and i'm bored for lost time. I try to find another simple program to replace Roxio. What do you recommend? ciao
  24. JLC78726

    no sound on DVD

    Also, just to be clear, there is NO audio on the burned DVD -- neither in the program nor in the menus. If the issue was just with the contents I'm adding to the DVD, then I would still expect the root to still have sound.
  25. JLC78726

    no sound on DVD

    And just to clarify, I'm exporting from VideoWave with the following settings:
  26. JLC78726

    no sound on DVD

    Yes, of course, the file I'm trying to burn to the DVD had audio. I offloaded an MOV file from my Canon PowerShot SX20. I trimmed the file with VideoWave, removing the extraneous parts and exporting as an MPG file. Then I built a DVD with MyDVD containing only that MPG. The resulting DVD has no audio.
  27. REDWAGON

    no sound on DVD

    So if you are burning a DVD what program is on the DVD and how was that program or production created ? Tell us more in regards to the DVD and it's contents. Was it A videowave program ? And did the program you have on the DVD have audio on it ?
  28. JLC78726

    no sound on DVD

    I recently upgraded to NXT 7, on my Windows 7 machine, and am trying to burn a DVD with MyDVD. The burned DVD has no sound. I've read previous posts that suggest changing the audio setting for burning, except that File/Project Settings gives me: and Tools/Settings gives me: Notice that there are no audio setting options. There are no other options menus in this version of NXT7. But even given that, none of the buttons in those menus actually do anything. I can click until I turn blue, and none of the buttons activate. SO, TWO QUESTIONS: (1) How to I get audio on the DVD? (2) How do I use those settings popups if the buttons are inactive?
  1. Load more activity
×