Jump to content

t3istar

Members
  • Content Count

    30
  • Joined

  • Last visited

Community Reputation

0 Neutral

About t3istar

  • Rank
    Rookie
  1. t3istar

    Saving Trimmed Video

    I really appreciate your quick reply. That's what I have been doing and I was hoping that the program might allow me to only save a highlighted clip but I guess it doesn't. Thanks again
  2. t3istar

    Saving Trimmed Video

    Is there a way to save the "trimmed" piece of video I cut out of a file as a separate item? I want to take different little clips out of a DVD and send them to various people, not string together a whole production.
  3. t3istar

    Saving Trimmed Video

    I am seeking assistance on how to save multiple clips in a production as separate files. For example, I start with a saved movie file (in MPEG format) and I extract 3 sections as separate edited clips. is there a way for me to save each of thes smaller clips individually by highlighting and then saving only that clip. No matter what I do, including invoking the edit internal tracks with only the one I would like highlighted, the save always saves all of the clips combined. Thanks for reviewing T3ISTAR
  4. t3istar

    Audio Drop During Burning

    I appreciate your question and welcome any further inputs. 720 x 480 fps 29.97 fps 16 bit 3.85GB file size
  5. t3istar

    Audio Drop During Burning

    I believe I solved the problem and while I can’t explain the technical basis for the correction, I think it is important to share it. The file sizes I have been capturing from a VHS VCR are on the order of 3.2-4GB. I have been successfully capturing and then burning to a DVD and all is well. Last week, on two of the files, I ran into to audio dropping off at ~ the same point on both files. That’s when I first posted on the forum. Your suggestions were well presented, but I could not get it work. However, I identified something that I wasn’t doing on these two files that I routinely did on all others. Because the start and finish points were perfect on the capture, I just burned those files to the DVD. In the past I have always trimmed and then resaved as MP EG-2 Best Quality for DVD. So I tried one of the files that lost Audio during the DVD Burn and even though it didn’t need trimming, I saved it first as MPEG-2 Best Quality for DVD. And then burned it and all was well. I did not do the ISO step. It worked and I do appreciate your courteous assistance and hope that perhaps this might help others. If you think you can explain what actually happened I would welcome the input Thanks I believe I solved the problem and while I can’t explain the technical basis for the correction, I think it is important to share it. The file sizes I have been capturing from a VHS VCR are on the order of 3.2-4GB. I have been successfully capturing and then burning to a DVD and all is well. Last week, on two of the files, I ran into to audio dropping off at ~ the same point on both files. That’s when I first posted on the forum. Your suggestions were well presented, but I could not get it work. However, I identified something that I wasn’t doing on these two files that I routinely did on all others. Because the start and finish points were perfect on the capture, I just burned those files to the DVD. In the past I have always trimmed and then resaved as MP EG-2 Best Quality for DVD. So I tried one of the files that lost Audio during the DVD Burn and even though it didn’t need trimming, I saved it first as MPEG-2 Best Quality for DVD. And then burned it and all was well. I did not do the ISO step. It worked and I do appreciate your courteous assistance and hope that perhaps this might help others. If you think you can explain what actually happened I would welcome the input Thanks
  6. t3istar

    Audio Drop During Burning

    I would like to continue my discussion if you have time. As I reported, during MYDVD burning the audio seems to drop off at the same time on differnet files but the video cotinues correctly. As a test I burned the portion where the audio dropped off (actually starting a little before to see if there might be a hangup somewhere, but all burned OK. I tried all of your suggestions, even though I routinely defrag and have more than 100GB available on my HDD. I was hoping that their might be a separate setting for audio that would solve the problem. I do appreciate you responses and if you think of anything else, I would appreciate your inputs. quote name='sknis' date='Apr 15 2008, 05:18 AM' post='198704'] Have you tried encoding to an ISO file and then copying that to a disc using Copy and Convert? Obviously when doing any video work, make sure everything is shut off including your anti-virus and anti-malware. Defrag your hard drive and make sure that there is a lot of free space. If you have your anti-virus running, it may be checking everything that is being written to you hard drive for viruses. That will definitely slow down everything and perhaps cause problems. If you computer has to work hard to find the files then there is a chance for problems.
  7. t3istar

    Audio Drop During Burning

    Thanks for your prompt and helpful reply. One of the items I tried was to disconnect by online status but I didn't disengage my firwalls or internet security. You may have hit on that correctly and I will try that. I have 75GB free on my HDD and I will defrag although I probably have enough available. The reason I asked about settings is that the Video recorded great, but the audio ends at the same time point on two different files when I am burning. Again, I really appreciate your assitance
  8. t3istar

    Audio Drop During Burning

    I have recently run into a new problem. When Burning a DVD from an MPEG-2 file (~4GB) the sound drops out at approximately the 3/4 point (~ 1 hour of recorded material) and it has happened on two recent burns. The video records excellently. I have not had the problem in the past and I wonder if it could be related to either a changed setting setting or an interference from perhaps another program or resource on the computer. I checked the captured file and the sound is perfect. Thanks
  9. Thank you for your prompt and courteous response. I called ROXIO Technical help and they advised that there is a problem with the WINZIP extractor if there is another file in the subdirector entitled setup.exex from another program. I put the two downloaded files into a separate folder and all worked well. You may want to post this should someone else run into the same problem. Thanks Again. Barry
  10. These are the two files that I downloaded. The second one start with an unzip for the EMCsuite 10 and then starts the PGP program Easy Media Creator 10 Suite - ESD UG/EM RoxioContentCDv10_SQA.exe RoxioEMCSuitev10_4737GA50R05.exe
  11. Noe the key to run the program. In my opinion it's an independent program that seems to be a part of the installation wizard. If I instruct the progran to abort, it shuts down the EMC installation wizard. I have never seen this on any Roxio program (the last version I had was MyDVD9. I downloaded after purchase from the Roxio site.
  12. It was a part of the downloaded file "RoxioEMCSuite10-4737GA50RUS. I agree that I don't know why it is needed but it always starts when I run the install program.[ I purchased the dowload today and had to download two files, this one and the content one and I start with the suite file. quote name=grandpabruce' date='Mar 3 2008, 06:49 PM' post='190266] PGP? What is it, and why is it running when you are trying to install a program? Shut it down.
  13. I downloaded the program and the content files. When I run the program file a utility --PGP starts and instructs me to set up keys before proceeding. I complete that process successfully and then I am asked to reboot. After rebooting nothing starts and I am require to start from scratch and go through the same procedure. Any hints? Thank You
  14. I am a long time satisfied Roxio user (starting with VW 4) and I have upgraded over the years and currently have been using MyDVD9 for more than a year without any problems on my Desktop and Laptop. Recently, I have been unable to use the production trim feature on my Desktop and then save in the various formats that I use. To find out if the file was corrupt, I copied to my laptop and I was able to save in multiple formats after trimming confirming that the file was OK. I also noticed that in the Trim format on my desktop the progress bar was not shown, yet it is shown on the Laptop. I have updated drivers on the Desktop and as I said, was using MYDVD9 successfully for more than a year. I uninstalled MyDVD9 and then reinstalled it per instructions with no success. I then tried the repair utility and that didn’t work. I welcome any suggestions that you may offer Thanks
  15. t3istar

    MyDVD - buffer size error message

    I was finally able to solve the problem after gearing from Tech Support by EMail. There were two extra steps at the end that weren't clear from previous postings and it worked. Hope this helps Please be sure that you have the latest version of Internet Explorer 7, and not the Beta version. To do this follow this: a. Go to Start>Control Panel. Choose Add or Remove Programs. b. Remove Windows Internet Explorer 7 (it will automatically roll back to Internet Explorer 6). c. Restart. d. Go to Start>All Programs>Windows Update. Get the latest Windows Updates. The issue you are having can be fixed by downloading this file: http://patches.sonic.com/techsupport/bo_hotfix.exe And running it once you're finished. Be sure to have all roxio or sonic applications closed when you run it. Also, you will notice a window open in the bottom task bar. Please wait until this has disappeared before continuing. Once that is finished, please follow these steps: 1.) Disable your startup items a. Click on the 'Start' button and select 'Run'. b. Type 'msconfig' and click on the 'OK' button or press the 'Enter' key. c. Select the 'Startup' tab over on the right side. d. Uncheck the 'RoxWatchTray9' option. e. Click on the 'Apply' button followed by the 'Close' or 'OK' button. k. Click on 'Restart'.
×