Is there a way to save the multi-camera project and continuing working on it (selecting cameras, keeping the sync of the video streams) etc? I have an hour long video that I did on two cameras and the amount of time to go completely through it will exceed the length of the videos by several multiples, plus I found syncing by audio very difficult with the two files and had to visually sync based on an easy to see event that's visible in both videos.
The loud click wasn't an option as the first shoot was in a church with the cameras started minutes before the service started. The only other things I noticed was once I started switching between cameras I couldn't set the transition between cameras (I wanted a one second cross fade). The other thing I noticed was either my initial sync was off more than I though or the cameras' frame rates didn't match exactly, but the end of the hour, the sound was off from one of the cameras by almost a whole second. I used my older cameras sound track as it was on auto level, the new camera has actual controls for the audio and I need to play with it more, it was too quiet.
I also found it irritating that I couldn't trim the end result, I had to export it, then edit the resulting video.
MyDVD crashes after running for a while trying to burn to Blu-ray or DVD (different projects) with the same error, that there isn't space for the current thread. Any ideas? If needed I can get the exact error message, but it does take a while to get to.
I'm going to answer my own question. I had tried to create a very high resolution video output file to use with MyDVD, but it wasn't done through the authoring section, so I'm guess that MyDVD doesn't like MPG files.
I got Multi cam to work, although its a pain. The sync on audio didn't work. I think I've found my answer to my original question. Once you click on "OK" and get back into Video Wave and save the project, you have an option when you right click on the video timeline or audio timeline to open Multi cam. However it warms you that any edits from Video Wave will be lost. Did allow me to reopen Multi Cam. I haven't played with it much more than that.
No idea where they are saved to other than maybe in the users AppData area.
Yes, saving, but not coming back to the camera selection process later on. In fact the tutorial doesn't recommend exiting until you are done and I see absolutely no way to get back into the camera selection process if you exit. So I need to block out several hours to work on this one hour video with two cameras.
BTW, the two failing titles were: The Tenors: Lead With Your Heart (2012, Universal)
The Tenors: Under One Sky Deluxe Edition (2015 Universal)
I couldn't even submit the information, as soon as I tried that link, it aborted the same way.
When using Batch Convert & Transfer or Advanced Rip on Windows 10.1, I get a Run Time error when trying to look up disk info: Microsoft Visual C++ Runtime Library Runtime Error! Program: D:\Program Files (...
And that's all the info get. If I try to just convert in Batch and Convert it aborts the same way when I click add after the Adding to Project progress bar appears. In advanced Rip, I can Rip, but it comes up as unknown content for all disks; if I try to look it up, it aborts.
I've tried repair and an uninstall and complete reinstall with no success.
An update, apparently it is some disks because others are working. HOWEVER, even when it works on the first disk, it aborts with the same error on a second disk that can be looked up after restarting the application. This and not being able to handle disks it can't find is a bug, I used to be able to do several disks in succession.
Another question now, since it doesn't appear to be related to the previously mentioned fix, how do I back the fix out or does it really mater?
To the Windows version question, it is 1703.
I tried the suggested fix, rebooted, tried, rebooted again, tried, same result.
Norton Security is installed on my system (Dell XPS 8500, I'm sure its a Windows update that started it as it was working fine and now only works once in a blue moon. The CD I'm currently trying is Copyright 2012, Universal Records.
I was burning disks (CD, DVD and DVD Dual Layer) without any issues. I bought the Blue-Ray plug-in and that worked too. Then there was a critical patch that got install in the last couple of weeks. Now I get error burning, I went to software rendering and I don't get any errors burning, but nothing other than single layer DVD seems to work so far in my Sony Blue-Ray players. So far everything I do doesn't work anywhere if it gets an error, but if there is no error it doesn't work in the TV players, but does work with WinDVD.
Anyone else had similar experiences? Its starting to get expensive trying different things with the Dual layer disks and I don't even want to start experimenting with the BD disks.
I know what you're talking about. I don't think that was the issue. I think that the My DVD program had some issues and the final clean re-install took care of the issue, but projects saved while there was a problem are still corrupted. When I have more time I'll check some of the projets created before the problem started.
I never loaded it onto C, that's a solid state drive with limited space (256GB, currently a little over half in use). Whenever possible I install programs to D unless they are system related.
I played a little more with it a little more this morning. I was able to open new saved projects, but not previously saved projects. I may have to recreate the old MyDVD projects and try again.
Any idea if Roxio will ever make the more detailed MyDVD available that they used to have? It allowed you to do so much more than the current version.
By "Complete" I was referring to a complete install. And yes I used REVO Pro Trial with the Moderate Scan. The only thing that doesn't seem to be working now is loading a previously saved project in MyDVD. I can create a new one, but if I try to load an old one in any manner, the program aborts.
Downloaded and installed the trial version of REVO uninstaller pro. Uninstalled everything, The actual Creator NXT Pro 5 last. Rebooted. Started the Roxio installer, it still thought one of the additional content items was already installed. Only options applied were to put it on my D disk (C is a 256 GB solid state drive) and complete. Everything installed with no errors that I saw including PaintShop pro. Rebooted. Checked for updates, applied updates. Applied BlueRay plug in.
Tested MyDVD opening existing project, program terminates you click on the MyDVD project file or try to open it as an existing project once the program has started. I can still create a new project.
I tried the repair function. Things got a lot worse. So I tried completely uninstalling everything and reinstalling. The burning is now working, but the installer/uninstaller scripts don't work well. The painstshop software uninstall failed and not the installer thinks its still there, also MyDVD will not not open existing projects without failing, each time I must now create the project from scratch, attached the videos and then burn or save as an ISO file.
Is there an uninstall cleanup tool for Creator NXT 5 Pro?
Well, the removal and reinstall resulted in the same issue. As a result I have found that the advanced backup file/folder selection doesn't seem to work under Windows 10 since it only presents the Desktop icon which can't be opened. Everything else I've tried seems to work so far. with the exception of a long standing problem I've had with video capture under windows 8 and 8.1.
My machine did the upgrade on a reboot after I asked for it to be delayed (I got three choices, now, tomorrow and the day after tomorrow). Since it started, I didn't have much choice. The thing I found so far that doesn't work any more is the advanced backup only shows "Desktop" when you go to select folders to be backed up.
I have Creator NXT Pro installed on a Dell XPS with Windows 8 Pro 64 bit. When I try to update I get the message "Cannot find the product. Visit the Home Page." Some modules like the video capture appear to start but terminate with no error. Installation went normal with no errors and I've even reinstalled. Very Frustrated!
When I try to run Video Capture under Windows 8 with Creator NXT Pro, the program hangs after starting and opening the program window. I'm trying to capture from a Roxio Video Capture USB device. The system also has a Microsoft USB camera attached.