Jump to content

rby63

Members
  • Content Count

    14
  • Joined

  • Last visited

Community Reputation

0 Neutral

About rby63

  • Rank
    Rookie
  1. I recently bought NXT 3 I try to intalledit but it failed. When I ran set-up first it tryed to unintall NXT 2 but unsucesfully after hores I aborded the set-up the result is some kays missing in the NXT 2 in this case is not possible unistall NXT 2 and install NXT3 I Iost my creators. I tryed several way but nothing.
  2. rby63

    No Avi Reading

    At the end I prefered to format my PC it was an hard work but now it seems it run well. So thank for everything if you need I can send you my avi files in every case I don't know was wrong
  3. rby63

    No Avi Reading

    1 I have only problem with Creator: videowave, cineplayer, however I can open all avi files with my media (W mediaplayer, VLC, Divx) 2 it seems only with creator 2012 3 yes see answear above 4 I can send one or more at your mail One year ago I try to clear the register with a software, since now I don't need to use creator so I don't know if the register was corrupt because I din't see the problem, peraphs I had from there. Connected to iaamdp32.acm there is a message join to file missing dll here you are what tell me (more or less) the register check (RUN CMD regsvr32 iaamdp32.acm "impossible to charge iaamdp.acm module try to debug in order to find missing dll"). I run Creator in repair mode but nothing. Now I have 3 possibilities 1 attend your answer 2 try to fix the problem with softwear but I'm afreid to worsen the situation 3 restore an image previous but in this case I have update all the system
  4. rby63

    No Avi Reading

    unfortunately I'm not able to run in best way GSspot however Ithink the problem is about the codec this is the message that GSspot give me Warning: DirectShow crashed while GSpot was attempting to obtain information about a codec. This is usually due to damaged, misconfigured, conflicting, or poorly written codec drivers. It is possible, perhaps even likely, that other media players will crash when they attempt to play this file as well, as most of them will also use DirectShow. GSpot was able to intercept the crash, and has attempted to identify the codec or filter involved; uninstalling or reinstalling this codec or filter may solve the problem. The codec was tentatively identified as: C:\Windows\system32\imaadp32.acm Unknown video codec #8 How can I fix the problem? Thank
  5. rby63

    No Avi Reading

    in videowave whit an existing or new project the result is the same it tell me these files or not modifiable and not charge them all the other openig files are MP4 it is a pity because my old creator worked well also whit existing project. It seen they are avi and not dvx avi
  6. rby63

    No Avi Reading

    Whit a pictures was easier show the problem so I have Creator 2012 ver 13.5; 6.0.0.0 when I should modify videos I open "advance video modify" (I hope it is the right translation) then choose new or existing project, soon appear the message windows more or less saing "files are not supported or demaged it is possible they need to install other application in order to read these file". in the folder they appear as files not readable
  7. rby63

    No Avi Reading

    Hi I don't know if is a 2012 issue problem but creator 2012 pro isn't able to read AVI video file however in the open windows in video modification file AVI are mentionend. I'm saing so because whit previous issue I didn't have problem. Do anyone had this problem?
  8. rby63

    Burn Error

    I tied to do an operation never attemted before: burn a duble side disk. I tried several disk it always failed, this is the error 0x8007045D
  9. rby63

    Probably A Little Problem

    the missing files are part of project pictures so to the question "sfoglia" (= said in which folder) I wrote the address of the folder where the picture are, in this way it seem work. Thank
  10. rby63

    Probably A Little Problem

    Hi it' s a pity because I obblied to pass to the new PC to get a burn also it's strange because it can open the project only it can't burn see attachment many thanks
  11. I just passed on a new PC i bought Media creator 2011 at first a segnalation the download is too long it took me about 3 days (at the end it is all right). Well on the old PC I had Media creator 9 and with it I made some projects, now I'm tring to open these projects on the new PC but they don't work because some are lost files Media creator tell me which are the files and where they are. So is it possible copy these files from old PC to the new? and if is it possible where I have to copy them? Thank a lot
  12. rby63

    burn problem

    Thanks for your helpfull informations, I'm continuing to fight whit my drive it has not a sense but it is a challenge. I installed PX engine this is the resul after a failed burn. Sense: 03 ASC: 73 ASCQ: 04 (Command 00) ------------------------------------------------------- Px.dll: 4.18.16.0 PxAFS.DLL: 4.18.16.0 pxdrv.dll: 1.2.47.0 PxMas.dll: 4.18.16.0 PxSFS.DLL: 4.18.16.0 PxWave.dll: 4.18.16.0 pxwma.dll: 1.0.0.3 See you later by
  13. rby63

    burn problem

    hi everyone i had some problems since i bought my notebook. It is a Sony vaio VGN-FS215S it always had problems with optical drive (sony dw 56a) difficulty to read CD and DVD very difficulty to write. I'm traing to understand what is the problem before to throw all far away, I'm traing to do that from error message my roxio easy creator 9 gave me these message: Failed to start the image writing operation Errore durante Masterizzazione dell'immagine 80004003 Errore durante Interruzione dell'operazione Sense: 05 ASC: 27 ASCQ: 00 (Command 2A) ------------------------------------------------------- Px.dll: 3.0.88.500 PxAFS.DLL: 3.2.41.500 pxdrv.dll: 1.1.94.0 PxMas.dll: 3.0.88.500 PxSFS.DLL: 3.0.88.500 PxWave.dll: 3.0.88.500 pxwma.dll: 1.0.0.3 is someone able to give me some answear? Thank a lot
×