Jump to content

mobilelawyer

Members
  • Content Count

    24
  • Joined

  • Last visited

Community Reputation

0 Neutral

About mobilelawyer

  • Rank
    Rookie
  • Birthday 01/28/1954

Profile Information

  • Gender
    Male
  1. mobilelawyer

    Weird Blu-Ray Creation Problem

    I will upload a sample tonight. The original m2ts file was captured using the Hauppauge Colossus, streaming the output from my directv hr24-500.
  2. mobilelawyer

    Weird Blu-Ray Creation Problem

    <bump> Anyone?
  3. mobilelawyer

    Weird Blu-Ray Creation Problem

    Thoughts, anyone? FWIW, I installed Creator 2012 (yes, I know that is a differnt board but I think this is the same problem) on a different machine, burned essentially the same project (it may have rendered a little faster) and got exactly the same results. The later burn was on an AMD rig: AMD Phenom II X6 1075T, Radeon HD 5770 card, vidoe8GB RAM, Windows 7 Home Premium, using a RAIDED 8TB array with about 40 per cent capacity left. That rig has no sound card: the 5770 is doing the honors throught HDMI. Video great audio like a very slow speed record. You old guys will know what I mean with the phonograph analogy.
  4. mobilelawyer

    Weird Blu-Ray Creation Problem

    My sound card is Creative Sound Blaster X-FI, driver version 6.0.1.1375, which is the latest version, as far as I know. What other information would be useful? I have previously posted my processor, memory, video card, etc. Mediainfo output from largest .m2ts file (pre- conversion) is attached (mediainfo). The files are not of the same size, admittedly, but MyDVD split the .m2ts files differently, than their original size. Mediainfo 2 is a post conversion m2ts file. Here are some comparisons from the two files: Comparison of Audio MyDVD produced m2ts file Format AC-3 Bit rate 384kbps Sampling rate 48.0 khz Bit depth 16 bits Compression mode Lossy Stream size 187 MiB (5%) Original m2ts file Format AAC Bit rate 62.7 Sampling rate 48.0 khz Bit depth None listed Compression mode Lossy Stream size 66.6 MiB (1%) Does MyDVD re-code the AAC audio to AC-3? I have attached an image of my project settings. I note that my project settings for audio format say LPCM. The other option is AC-3, and that is what the program appears to have output. Maybe that is my problem. Hopefully, someone who can interpret this information can help. The audio filter settings in MyDVD show: C:\Users\Bill Donaldson\AppData\Roaming\Roxio\EMC13\VideoUI\AudioFilters Thanks in advance for any assistance that anyone can provide. mediainfo.txt mediainfo2.txt
  5. mobilelawyer

    Weird Blu-Ray Creation Problem

    Anyone? I had to revert to using a competitor's product to make the disc, which was rendered without incident. I had never used My DVD in 2011, so this issue may have subsisted for awhile, and I was just not aware. Video- great, Menu- Works like a charm; Audio - there's my problem! The .wav file I used for the audio menu plays just fine, but when I click one of the links to play a an .m2ts file, the video pops right up, and is just beautiful, but the audio plays like it is at the wrong speed: slooooow. And the problem also exists when I play any .ts or .m2ts file with Cineplayer. Mediacenter, windows media player, VLC player, etc. play the files back just fine. The Roxio products choke on them. I have the Roxio product updated to the latest version. The production was a homemade production of the one of the bowl games, using h.264 m2ts files edited with Videoredo. The files are rather lenghty- one of them around 3 hours long (its a ballgame!), and I would think that since I am producing a 25 gb blu-ray disc which is only half full with the production content, the .m2ts files would not even have to be remuxed by MyDVD to make the disc. Arcsoft Total Media Experience, produces a final blu- ray product in less than an hour: I had to leave MyDVD running all night to finish the same project. And again, video and menu worked just fine, but the slow audio plagued each linked video in the Blu- ray. Never actually burned the project to a disk. Created files and folders, and used Imgburn to create a mountable .iso file. Also produced an iso file using MyDVD. Same result. I am thinking this is going to be something so obvious that I am going to blush in humiliation when someone tells me what I am doing wrong. Go ahead, hit me! I am a big boy.
  6. mobilelawyer

    Weird Blu-Ray Creation Problem

    Any idea on what could have cause this? Burned the Blu-ray from h.264 m2ts files at the highest quality setting. It took several hours for the production to render. Previously, I had burned to .iso, and got the same result. Switched to simply creating folders, and got the same result. Has anyone experienced this problem, and what is the cause? Intel Core 2 Quad processor, 2.4 Ghz, Nvidia GForce GT430, WD Caviar black 1GB HDD with plenty of space left. The audio sounds like a 33 1/3 record playing at 16 rpm. No warble or flutter, though!
  7. mobilelawyer

    Download Of Creator Pro 2011

    Sorry to be so vague, and I also forgot to attach the jpg showing the information about the files I downloaded today. I am correcting that with this post. The downloader initial message shows 3 files are to be downloaded. I downloaded the whole package this afternoon, and the file list shows 3 files were downloaded. Somehow, I lost or deleted one of them, because it is not on the hard drive I used to save the files to this weekend. I am also attaching a jpg of the file list, which shows the sizes of the files after the download completed. This past weekend I only had two files when I got home. I installed the 2011 Creator Pro Exe file and rebooted, and then I installed the Roxio 2011 Content file and rebooted. But, somehow, I must have deleted or lost a third file: Roxio 2011 Pro Disc 2, which was 322,615MB in size. I will correct that omission and install it tonight. It must be the extras file. And, contrary to the message from the Roxio Downloader, I unchecked the option to begin installing automatically after the download was complete. When I got home this weekend and observed that I only had two install files, I wondered whether "Part 1" somehow subsumed the "Part 2" file into a single file after the download was complete, and I had simply not noticed. This is obviously not the case, because today I verified that there are 3 files, just like I remembered, and not two.
  8. mobilelawyer

    Download Of Creator Pro 2011

    I will have to look on the drive at home. I do not have it here. I had the content file and installed it. But just for grins, I did download again, and there are three files, not two. But I am assuming when the the creator pro executable is invoked, it combines one and two. See attached file list from today's download.
  9. I purchased and downloaded Creator Pro 2011 on Friday. I saved the files to a portable harddrive at work, and took them home to install on my HTPC.I noticed that three files were originally downloaded by Roxio Download Manager, but that only two files existed on the hard drive when I got it home: Creator 2011 Pro and the accompanying Creator Pro Content file. I assumed that Parts One and Two of the Roxio Creator Pro were combined into one file by the Manager. Is this correct? My recollection is that the Creator Pro installation file was about 1.8GB in size. I note that the Part 1 file that is orginally downloaded is 1.52GB and Part 2 is 315MB. So the sum of those two should work out to be about 1.8GB. Am I correct? Since I installed the program, apparantly without any issue, and it appears to be working OK, I assume "I got it all". Can someone please verify? I do notice that I got serial numbers in the purchase email for Sonicfire Pro and SoundSoap, but I was never prompted to enter either of them during the installation. So I am just making sure I got a complete install. Thanks in advance for your help.
  10. mobilelawyer

    No Sound After Conversion Of .ts File To .mpg

    malatekid, many many thanks!
  11. mobilelawyer

    No Sound After Conversion Of .ts File To .mpg

    This solution finally solved my problem: I changed the file extension of the .ts file I was working with to .mts. After making that change, I was able to add the file to My DVD, and produce a working dvd with audio. The file was converted in the process to an .mpg file, and the sound was there. Many thanks to cdanteek for his assistance in helping me analyze this problem.
  12. mobilelawyer

    No Sound After Conversion Of .ts File To .mpg

    They are each about 5mb in length.
  13. mobilelawyer

    No Sound After Conversion Of .ts File To .mpg

    OK. Here are several screen captures. This is all from a 15 second .ts file and the .mpg file converted through My DVD with no audio. The test files are 15 seconds long. Would it help to upload those also?
  14. mobilelawyer

    No Sound After Conversion Of .ts File To .mpg

    Ok, here is a screen capture of the output of gspot, but I am not sure this is what you are looking for. This is with a working .ts file.
  15. mobilelawyer

    No Sound After Conversion Of .ts File To .mpg

    Have gspot loaded, but I'll need some help to post what you have asked me to. If I ask it to bring up media types for a loaded .ts file, the product is too big to capture. BTW: the file is a .ts file, not .tx. Sorry about the typing mistake.
×