Jump to content

io550

Members
  • Content Count

    17
  • Joined

  • Last visited

Community Reputation

0 Neutral

About io550

  • Rank
    Rookie
  • Birthday 08/08/1951
  1. io550

    MYDVD 6

    An Update, Mydvd6 and my system (for what ever reason) just don't get along. What I ended up doing is toss out the Dazzle USB, installed an ATI TV Wonder which solved most of my capture problems, then I installed Beyond TV4 by Snapstream, which solved ATI's program problems and got Sony Vegas 6.0 and all became right with "my video world". I'm still trying to solve the MyDvd problem just because it's there. Thanks again for all the good ideas, which lead to a much smoother running system as a side benefit. IO550
  2. io550

    MYDVD 6

    Lance, Thanks for the pat on the back, Althought I have solved my problem through alternate methods, I just can't leave a problem unsolved. I really feel that MyDVD is the solution/problem and as systems continue to evolve (sorry, for the deep look), software vendors (ie developers) will have to address the user issues, or be left behind. But enought of the esoteric. I changed my video card (dual 7800's) with the same result, and I'm building a second system based on a dual core pentium and will see what happens, I will keep posting. IO550
  3. io550

    MYDVD 6

    Still working on it, I downloaded Sony Vegas 6.0 and it runs without a hitch, a little bit bulky but not bad all in all, the only problem is the reckog of the Dazzle USB but tech support is responsive. I'm still baffled by the instant reboot problem with MyDvd and when I install the new CPU I will update, I'm also install twin cards for SLI and maybe that will change things up a bit. Best Regards, IO550
  4. io550

    MYDVD 6

    Update, I went through all the suggestions..... Still the same problem, launch program...reboot! I scored a new CUP (not a dual core) and will have it installed soon. I post the results. Thanks to all nad we'll see what happens. IO550
  5. io550

    MYDVD 6

    Interesting turn of events, I tried load and run of "Age of Empires III", it errored on the video card "no memory available", so I checked the AMD site and found and update for video, and now "Age II" works fine, but DVD6 still just causes a reboot.... Darn it. IO550
  6. io550

    MYDVD 6

    Thank You All, Many excellent ideas, but I'm at the dead end. I guess that it must be an incompatability of the software with the 3800+ dual core. I ran all the suggestions (several times) updated the chipset and bios, across the board. The Dep issues software and hardware had no effect, virus issues and spyware were not factors. Interestly the only software issues were Mydvd6 and the intervideo product, everything else "no problem" but just not effective for video capture. I just can't go the money right now for another CPU (AMD 64 3800) but prices are falling so maybe in a week or two. I keep checking for ideas, and will post any breakthrough. Best to all, IO550
  7. io550

    MYDVD 6

    I wish he was... But I did set IPSEC Services to manual and that error went away, strangely all the start-up errors went away from "event viewer for "application, system and security", but still stranger still instant reboot on program launch, also I checked for the Roxio programs that Lance suggested and none were to be found??? Still trying, IO550
  8. io550

    MYDVD 6

    Hi Lance, Still flogging it. I narrowed it down to: Details Product: Windows Operating System Event ID: 7023 Source: Service Control Manager Version: 5.0 Component: System Event Log Symbolic Name: EVENT_SERVICE_EXIT_FAILED Message: The %1 service terminated with the following error: %2 Explanation The specified service stopped unexpectedly with the error indicated in the message. The service closed safely. User Action To troubleshoot the error: Review the error information displayed in the message. To display the WIN32_EXIT_CODE error that SCM encountered, at the command prompt, type sc query service name The information displayed can help you troubleshoot possible causes for the error. Version: 5.2 Symbolic Name: EVENT_SERVICE_EXIT_FAILED Message: The %1 service terminated with the following error: %2 Explanation The specified service stopped unexpectedly with the error indicated in the message. The service closed safely. User Action To troubleshoot the error: Review the error information displayed in the message. To display the WIN32_EXIT_CODE error that SCM encountered, at the command prompt, type sc query service name The information displayed can help you troubleshoot possible causes for the error. -------------------------------------------------------------------------------- Related Knowledge Base articles You can find additional information on this topic in the following Microsoft Knowledge Base articles: • You cannot start the Windows Firewall service in Windows XP Service Pack 2 Describes that you cannot start Windows Firewall after you install Windows XP Service Pack 2. This article provides steps for troubleshooting startup problems with the Windows Firewall service. • Adding or removing a program may generate Event ID 7023 When you add or remove a program by using Add/Remove Programs in Control Panel, the following event may appear in the system log: Event Type: Error Event Source: Service Control Manager Event ID: 7023 Description: The Application Management... • You cannot create a network connection after you restore Windows XP Fixes a problem with a restored installation of Windows XP SP1 that cannot create a network connection. • When you disable the Windows Firewall service on your Windows XP Service Pack 2-based computer, the Computer Browser service stops after five minutes and Event ID 7023 is logged in the Event Viewer Describes a fix for an issue in Windows XP Service Pack 2 (SP2) where the Computer Browser service stops after five minutes and Event ID 7023 is logged in the Event Viewer System log when you disable the Windows Firewall service. with as a leadin: The IPSEC Services service terminated with the following error: The attempted operation is not supported for the type of object referenced. But..... on the other hand I just logged this: Error code 000000fc, parameter1 b03b3924, parameter2 45dbb963, parameter3 b03b3898, parameter4 00000001. 3 times in less than 3 seconds. I will continue the effort. Thanks Again IO550
  9. io550

    MYDVD 6

    Well, DeepBlue is my youngest son, so... not an a hostile takeover??? Or at least unknown. But.. The IPSEC Services service terminated with the following error: The attempted operation is not supported for the type of object referenced. Error 7023 seem to be the reocurring problem after the uncommanded reboot Well, at least the "Games Afoot" and with any ideas maybe will we'll cure theis beast. In hope, IO550
  10. io550

    MYDVD 6

    My best to everyone, I appreciate the input and I'm working my way throught the list. I did run antispyware again and virus scans with etrust and mcafee. The DeepBlue issue has not reappered. Well on to DEP. Thanks Much, IO550
  11. io550

    MYDVD 6

    I gave it a try, ran McAfee anti-virus, Windows Defender, Spybot all came back OK. Still trying.... IO550
  12. io550

    MYDVD 6

    Hi Lance, I ran through a few program launch failures and got the following: The IPSEC Services service terminated with the following error: The attempted operation is not supported for the type of object referenced. The IP address lease 192.168.1.104 for the Network Card with network address 00173101C882 has been denied by the DHCP server 192.168.1.1 (The DHCP Server sent a DHCPNACK message). The master browser has received a server announcement from the computer DEEPBLUE that believes that it is the master browser for the domain on transport NetBT_Tcpip_{DB5D5CFB-FFD0-4FF2-. The master browser is stopping or an election is being forced. The IPSEC Services service terminated with the following error: The attempted operation is not supported for the type of object referenced. Error code 000000fc, parameter1 a8cbd924, parameter2 426e5963, parameter3 a8cbd898, parameter4 00000001. Error code 000000fc, parameter1 a93bf924, parameter2 7068d963, parameter3 a93bf898, parameter4 00000001. Error code 000000fc, parameter1 a8ae9924, parameter2 49ef6963, parameter3 a8ae9898, parameter4 00000001. The master browser has received a server announcement from the computer DEEPBLUE that believes that it is the master browser for the domain on transport NetBT_Tcpip_{DB5D5CFB-FFD0-4FF2-. The master browser is stopping or an election is being forced. There were a few repetetions which I'll try to follow-up on. I haven't given up yet... IO550 Hi Lance, I ran through a few program launch failures and got the following: The IPSEC Services service terminated with the following error: The attempted operation is not supported for the type of object referenced. The IP address lease 192.168.1.104 for the Network Card with network address 00173101C882 has been denied by the DHCP server 192.168.1.1 (The DHCP Server sent a DHCPNACK message). The master browser has received a server announcement from the computer DEEPBLUE that believes that it is the master browser for the domain on transport NetBT_Tcpip_{DB5D5CFB-FFD0-4FF2-. The master browser is stopping or an election is being forced. The IPSEC Services service terminated with the following error: The attempted operation is not supported for the type of object referenced. Error code 000000fc, parameter1 a8cbd924, parameter2 426e5963, parameter3 a8cbd898, parameter4 00000001. Error code 000000fc, parameter1 a93bf924, parameter2 7068d963, parameter3 a93bf898, parameter4 00000001. Error code 000000fc, parameter1 a8ae9924, parameter2 49ef6963, parameter3 a8ae9898, parameter4 00000001. The master browser has received a server announcement from the computer DEEPBLUE that believes that it is the master browser for the domain on transport NetBT_Tcpip_{DB5D5CFB-FFD0-4FF2-. The master browser is stopping or an election is being forced. There were a few repetetions which I'll try to follow-up on. I haven't given up yet... IO550
  13. io550

    MYDVD 6

    Still dead in the water.... The system still just reboots on program launch. Processor AMD 3800+ dual core 512/512 MB A8n32-sli-deluxe with Nvida Gforce 4 AMD/Hammer Ram 2 gb PC3200 DDR SRAM Sata 250 GB drive (non-raid) Video card EVGA 7300 GS 512 Windows DEP not a factor Still looking for ideas. IO550
  14. io550

    MYDVD 6

    THanks Vid2man97, I'll try checking that also when I get home, everything is worth a try! IO550 Thank you for the idea, I'll check on it. Best Regards, IO550
  15. io550

    MYDVD 6

    grandpabruce, Still no luck with the msconfig idea, when I lauch the program ....instant reboot. I'll keep trying, and see what happens. On the the other side I also tried brand x and althought their product will launch it won't capture but will edit ok. The windows program functions but is pretty limited in relation to Mydvd. Darn'it I know it should work on this system, I'm just missing something. IO550 grandpabruce, Still no luck with the msconfig idea, when I lauch the program ....instant reboot. I'll keep trying, and see what happens. On the the other side I also tried brand x and althought their product will launch it won't capture but will edit ok. The windows program functions but is pretty limited in relation to Mydvd. Darn'it I know it should work on this system, I'm just missing something. IO550
×