Jump to content
  • 0
fc227

Video And Sound Playing In The Window, But Is Says "no Signal" Next To It

Question

Greetings all,

 

Video and sound playing in the window, But is says "no signal". This happens with my USB video stick , But it does recognize my MSI tuner card. When I send a signal to that I get both video and sound and I am allowed to capture. But not when I use the "USB"

 

Any ideas ?

Share this post


Link to post
Share on other sites

21 answers to this question

Recommended Posts

  • 0

Greetings all,

 

Video and sound playing in the window, But is says "no signal". This happens with my USB video stick , But it does recognize my MSI tuner card. When I send a signal to that I get both video and sound and I am allowed to capture. But not when I use the "USB"

 

Any ideas ?

 

No idea since I cannot figure out from your post what it is you are doing or even what you are trying to do.

 

How about a detailed explanation?

Share this post


Link to post
Share on other sites
  • 0

Well, I could upload a screen shot it would explain better.

It will not allow me to upload

But I am in the video capture screen , when running with the "USB" video capture hardware , I see and hear the video. BUT the Video capture screen say" Staus" "no signal" ,But i am watch the video play.

Edited by fc227

Share this post


Link to post
Share on other sites
  • 0

Well, I could upload a screen shot it would explain better.

It will not allow me to upload

But I am in the video capture screen , when running with the "USB" video capture hardware , I see and hear the video. BUT the Video capture screen say" Staus" "no signal" ,But i am watch the video play.

 

From what is it you are trying to capture?

 

To attach a picture (from the forum Help system):

 

Attachments

Depending on where in the community you are posting your message at, you may be able to upload attachments to your message. There are two types of uploaders available: the default uploader and the flash uploader.

 

Default Uploader

The default uploader allows you to upload attachments one at a time. To begin, press the Attach Files button. A box will appear for you to select the file on your computer that you want to attach. Select the file you want to upload.

 

If you change your mind, you can press the button and then choose a different file.

 

Once you have selected the file you want, press Attach the file.

If there are any errors uploading the file, you will receive an error message, otherwise, you will see the attachment appear.

 

Flash Uploader

You can enable the flash uploader from your settings menu. When enabled, you will be able to easily upload more than one file at a time.

 

To start, press Click to Attach Files. A box will appear for you to select the file or files on your computer that you want to attach. Select the file or files you want to upload. You can select more than one file at a time by holding Ctrl (on Windows) or Command (on Mac) and click on the files.

 

Once you have selected your files and clicked "Open", they will begin uploading. If there are any errors uploading the files, you will receive an error message, otherwise, you will see the attachments appear.

 

Managing Attachments

Regardless of which uploader you use, once the files are uploaded you will see them on your screen. By default, all attachments are added to the bottom of your message, however, you can add any attachment to a particular section of your post by pressing the "Add to Post" link.

 

If you wish to remove an attachment and have it not appear in your post, simply press the "Delete" link.

Share this post


Link to post
Share on other sites
  • 0

post-122717-0-27256700-1420144759_thumb.jpg

 

 

Figured that part out .. I think it has to do with my easy caputure usb stick. It saying weak signal when in Ulead Studio, But it does allow me to capture there and the video and sound is good . But Roxio , well see attached.

 

Thank you very much for your help

 

 

God Speed, Fred

Share this post


Link to post
Share on other sites
  • 0

post-122717-0-27256700-1420144759_thumb.jpg

 

 

Figured that part out .. I think it has to do with my easy caputure usb stick. It saying weak signal when in Ulead Studio, But it does allow me to capture there and the video and sound is good . But Roxio , well see attached.

 

Thank you very much for your help

 

 

God Speed, Fred

 

That does not look like a Roxio capture device. Is this the capture device you are using: "Usb 2.0 atv easycap"? If you are using a non-Roxio device then the Roxio software may not work with the device correctly

 

I assume you are trying to capture video from some video player: VHS VCR or what? You are not supplying much inforation to work with

Share this post


Link to post
Share on other sites
  • 0

What attached picture?

 

This one?

 

post-208-0-05180500-1420156772_thumb.jpg

 

 

 

 

 

Regards,

Brendon

Share this post


Link to post
Share on other sites
  • 0

I hear and see video in the window , but the status window show "no signal" .How can there be no signal ,when I am wacthing it ?

Share this post


Link to post
Share on other sites
  • 0

You said: "I am using a camcorder using composite and s-video"

Which camcorder? If it is already digital, you don;t need an Analog to Digital converter (the USB stick). If analog, then you would.

Share this post


Link to post
Share on other sites
  • 0

I was using the analog outputs , But the Cam corder does have a DV out , Now i have to find cable

Share this post


Link to post
Share on other sites
  • 0

I was using the analog outputs , But the Cam corder does have a DV out , Now i have to find cable

 

Yes, that should solve your problems with compatibility. Find the cable and attach it directly to your computer -USB or Firewire; which ever is applicable.. Why didn't you tell us which camcorder? That would have helped. Do you have a Firewire (IEEE) port on your computer?

Share this post


Link to post
Share on other sites
  • 0

Roxio will not work with another device. You would have to make an analog capture using the software taht was included with your EasyCap ;)

 

As Steve pointed out, the DV output will work IF you have a Firewire (1394) and an OS that supports it :D

 

So there are 2 paths to pursue, let us know!

Share this post


Link to post
Share on other sites
  • 0

Yes , it has 1394 port and the Camcorder is a Sony DCR-TRV820 . The cam corder also has a "LANC/digital i/o" port that plug into a serail port But My computer only has USB ports no com ports.

 

Looking around for the DV to 1394 cables , but no local computer store has them. Looks like I will have to order one online.

Share this post


Link to post
Share on other sites
  • 0

After digging around most of the afternoon, I final found the cable that came with the camcorder and It works !!!! Thank you Lord and tahnk you Guy's!

Share this post


Link to post
Share on other sites
  • 0

After digging around most of the afternoon, I final found the cable that came with the camcorder and It works !!!! Thank you Lord and tahnk you Guy's!

 

Great !

Share this post


Link to post
Share on other sites
  • 0

For giggles , I order the $11.00 usb stick and that one works on Roxio. So I am still going to use the Digital i/o.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×