Recording With Hdmi Going In/preview Problem

[PsYchDesmon]

Hey Guys,

 

I have a monitor that has 2 HDMI IN PORTS and 1 HDMI OUT PORT. If i ran 1 HDMI from the "HDMI OUT" port on my BenQ Monitor, into the "HDMI IN" on my Roxio Game Capture HD Pro, then the provided USB from the Roxio Game Capture HD Pro in my Computer, would this still enable me too record my gameplay at 720? Or, do i have to use my Roxio Game Capture HD Pro as a pass through in between my PS4 and my Monitor. Any answers on this would be great!

 

Currently, i am also experiencing a problem where the preview screen within the Roxio Game Capture HD Pro software is Black/Purple, yet the signal say's "READY" and when i record the gameplay still comes out fine... But i'd still be able too prefer to be able too look at the preview whilst im recording too make sure everything is ok. Any ideas? Any help/tips would be appreciated!

 

Cheers,

PsYchDesmon

[PsYchDesmon]

As long as the HDMI out from your TV doesn't have HDCP (copy protection) added to it, then that signal should work fine for the RGC HD Pro, there's no real requirement for the device to be between the game console and the TV.

 

As for the black/purple screen, while it's actually capturing okay, I haven't seen that. But I would suggest you make sure that your video drivers are up to date on your capture PC as a starting point.

So here is the monitor i have...

http://gaming.benq.com/gaming-monitor/rl2460ht

 

It says you can have the Capture card after the Monitor, but im not sure as to whether it would work with the RGC HD Pro

 

Ok sure, ill update drivers, and get back to you and see if it works

[d_deweywright]

All the RGC HD Pro requires is an HDMI signal (or Component) going into it. So there's no problem with having it connected after the monitor. I didn't find any reference to HDCP in the manual, so hopefully it doesn't add HDCP to the output HDMI signal.

[PsYchDesmon]

All the RGC HD Pro requires is an HDMI signal (or Component) going into it. So there's no problem with having it connected after the monitor. I didn't find any reference to HDCP in the manual, so hopefully it doesn't add HDCP to the output HDMI signal.

Yeah oka, it doesnt add HDCP after the signal goes out. So, thanks for the help )

[d_deweywright]

As long as the HDMI out from your TV doesn't have HDCP (copy protection) added to it, then that signal should work fine for the RGC HD Pro, there's no real requirement for the device to be between the game console and the TV.

 

As for the black/purple screen, while it's actually capturing okay, I haven't seen that. But I would suggest you make sure that your video drivers are up to date on your capture PC as a starting point.