Jump to content
  • Who's Online   0 Members, 0 Anonymous, 10 Guests (See full list)

    • There are no registered users currently online
  • 0

Problem Dv Film To Pc With Roxio Capiture Hd Pro




Can you help me
When i use Roxio Capiture HD PRO betwen my DV camera analog in and my PC input whith USB whith program Roxio Capiture HD PRO

Its been black and White film on the pc
I test to move the cable and i use this cable before whit an other program and its ok



Link to comment
Share on other sites

5 answers to this question

Recommended Posts

What capture device do you have? You say you have Roxio Capture HD Pro (which is a device for capturing game play from consoles) but state you are trying to capture from your analog DV camera.


Could you please clarify exactly what you have and how you are hooked up?

Link to comment
Share on other sites

That is a good video!


But what he Did Not say was that if you use Composite signals with a Component device like the RGC all you can get is grainy Black & White...


To get color, you are going to need a device that accepts the output your camcorder can produce - Composite or S-Video.


There are plenty and pretty cheap if you shop around. Just make sure you get the software intended for the device as most only work with what the manufacture provides ;)

Link to comment
Share on other sites


Thanks for your answer

You can see it on the film i se on the Youtube

I use the Roxio Capiture HD PRO to signal from my DV camera analog signal to my PC






My English it not so good :-((




If you look closely at the 4.25 point in the YouTube video, that sure looks like Black & White. I don't see any color.


The Roxio unit's Green Component in jack does not work with the Composite Yellow (you get a Black and White picture).


Not all component (green) jacks, support Composite Yellow. Here is a picture of how they look if they do.



Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...