ridebouk Posted February 14, 2007 Report Share Posted February 14, 2007 The bold line, in your post, answered your question. Let us know how it works out for you. I had xactly the same problem. I saved an iso image. whenever I try to burn it I get the message: this disc is incompatible with the sourse disc. I tried different brands, but still the same message! any suggestions? Link to comment Share on other sites More sharing options...
ridebouk Posted February 16, 2007 Author Report Share Posted February 16, 2007 Going back to the iso image, does the preview look fine? You can preview the iso file by using Disc Copier and using the Preview tool there. Yes I can see the movie in the preview & it looks fine. Here is the same Verbatim +R DL disc in two different burners and EMC 9 DVDinfo Pro! Look for the Available Write Descriptor. The Plextor will burn the disc at 2.4, 4, and 6 X and produce a good disc. The BenQ will only burn the disc at 2.4 X any faster and I get what you get a coaster! Check your media before you burn and only burn at the Available Write Descriptors. Media Information Plextor DVDR 716A firmware 1.09 Region information N/A not a DVD-VIDEO Media code/Manufacturer ID MKM 001 Media Product Revision Number 00h Format Capacity Blank Disc Free Blocks 4253024256 Free Capacity 7.96GB(8.55GB) Book Type DVD+R DL Media Type DVD+R DL Manufacturer Rated Speed 2.4x 3324KBps Available Write Descriptor CLV 6.0x 8310KBps Available Write Descriptor CLV 4.0x 5540KBps Available Write Descriptor CLV 2.4x 3324KBps Data area starting sector 30000h Layer 0 end sector 22D7FFh Linear Density 0.293um/bit Track Density 0.74um/track Number of Layers 2 Layer Track Path direction (OTP) Opposite track path Complete Media Code 00000000 01 02 00 00 E1 0F 32 10 00 03 00 00 00 FC FF FF ......2......... 00000010 00 22 D7 FF 00 00 00 4D 4B 4D 00 00 00 00 00 30 .".....MKM.....0 00000020 30 31 00 40 25 25 37 0C 02 2F 63 02 2F 63 21 23 01.@%%7../c./c!# 00000030 0D 0E 14 14 02 01 01 10 00 21 23 0D 0E 14 14 02 .........!#..... Media Information BenQ DVD LS DW1655 firmware BCIB Region information N/A not a DVD-VIDEO Media code/Manufacturer ID MKM 001 Media Product Revision Number 00h Format Capacity Blank Disc Free Blocks 4253024256 Free Capacity 7.96GB(8.55GB) Book Type DVD+R DL Media Type DVD+R DL Manufacturer Rated Speed 2.4x 3324KBps Available Write Descriptor CLV 2.4x 3324KBps Linear Density Blank Disc Track Density Unknown Number of Layers 1 Complete Media Code 00000000 01 02 00 00 E1 0F 32 10 00 03 00 00 00 FC FF FF ......2......... 00000010 00 22 D7 FF 00 00 00 4D 4B 4D 00 00 00 00 00 30 .".....MKM.....0 00000020 30 31 00 40 25 25 37 0C 02 2F 63 02 2F 63 21 23 01.@%%7../c./c!# 00000030 0D 0E 14 14 02 01 01 10 00 21 23 0D 0E 14 14 02 .........!#..... cd Here's the media info for Memorex & Philips DVD+R DL : Memorex Media Information Region information N/A not a DVD-VIDEO Media code/Manufacturer ID RITEK D01 Media Product Revision Number 01h Format Capacity Blank Disc Free Blocks 4253024256 Free Capacity 7.96GB(8.55GB) Book Type DVD+R DL Media Type DVD+R DL Manufacturer Rated Speed 2.4x 3324KBps Available Write Descriptor CLV 4.0x 5540KBps Data area starting sector 30000h Layer 0 end sector 22D7FFh Linear Density 0.293um/bit Track Density 0.74um/track Number of Layers 2 Layer Track Path direction (OTP) Opposite track path Complete Media Code 00000000 08 02 00 00 E1 0F 32 10 00 03 00 00 00 FC FF FF ......2......... 00000010 00 22 D7 FF 00 00 00 52 49 54 45 4B 00 00 00 44 .".....RITEK...D 00000020 30 31 01 40 25 25 37 0C 00 28 64 00 28 64 20 1F 01.@%%7..(d.(d . 00000030 0C 0C 14 14 02 01 01 20 00 20 1F 0C 0C 14 14 02 ....... . ...... Media Information Region information N/A not a DVD-VIDEO Media code/Manufacturer ID PHILIPS CD2 Media Product Revision Number 00h Format Capacity Blank Disc Free Blocks 4253024256 Free Capacity 7.96GB(8.55GB) Book Type DVD+R DL Media Type DVD+R DL Manufacturer Rated Speed Unknown Available Write Descriptor CLV 4.0x 5540KBps Data area starting sector 30000h Layer 0 end sector 22D7FFh Linear Density 0.293um/bit Track Density 0.74um/track Number of Layers 2 Layer Track Path direction (OTP) Opposite track path Complete Media Code 00000000 08 02 00 00 E1 0F 32 10 00 03 00 00 00 FC FF FF ......2......... 00000010 00 22 D7 FF 00 00 00 50 48 49 4C 49 50 53 00 43 .".....PHILIPS.C 00000020 44 32 00 40 25 25 37 0B 02 3C 6A 02 3C 6A 1B 1C D2.@%%7..<j.<j.. 00000030 0D 0C 0C 0C 02 01 01 10 00 1B 1C 0D 0C 0C 0C 02 ................ It never gives me the option of burning at 2.4X, the recomended speed by both philips & memorex. Link to comment Share on other sites More sharing options...
grandpabruce Posted February 14, 2007 Report Share Posted February 14, 2007 I had xactly the same problem. I saved an iso image. whenever I try to burn it I get the message: this disc is incompatible with the sourse disc. I tried different brands, but still the same message! any suggestions? Your problem is not the same as the thread you posted to. Explain what you are doing when you get that error. To me, it looks like you are trying to copy from one disc to another. Link to comment Share on other sites More sharing options...
ridebouk Posted February 15, 2007 Author Report Share Posted February 15, 2007 Your problem is not the same as the thread you posted to. Explain what you are doing when you get that error. To me, it looks like you are trying to copy from one disc to another. thank you for addresing this issue. I am using creator 9's my dvd, to burn a videowave project on a Memorex DVD+R DL Everything is going smooth. I start the burn to disc operation. a couple of hrs later, it gets to 97% & it starts the burning image on disk; I get the error message: Failed to start the image writing operation Error while Burning Image 80004003 Error while Aborting I tried again using a Philips DVD+R DL & I got the same error message! Luckily I saved an iso image on the drive. If I try to burn the iso image to a DVD I get the error message: Disc Incompatible With Source Disc tried the msxml3.dll fix, restarted my system, still it doesn't burn an image. that's my story hope you can help me Link to comment Share on other sites More sharing options...
malatekid Posted February 15, 2007 Report Share Posted February 15, 2007 thank you for addresing this issue.I am using creator 9's my dvd, to burn a videowave project on a Memorex DVD+R DL Everything is going smooth. I start the burn to disc operation. a couple of hrs later, it gets to 97% & it starts the burning image on disk; I get the error message: Failed to start the image writing operation Error while Burning Image 80004003 Error while Aborting I tried again using a Philips DVD+R DL & I got the same error message! Luckily I saved an iso image on the drive. If I try to burn the iso image to a DVD I get the error message: Disc Incompatible With Source Disc tried the msxml3.dll fix, restarted my system, still it doesn't burn an image. that's my story hope you can help me Have you updated your firmware lately? http://kb.roxio.com/content/kb/Creator/000117CR Link to comment Share on other sites More sharing options...
ridebouk Posted February 15, 2007 Author Report Share Posted February 15, 2007 Have you updated your firmware lately? http://kb.roxio.com/content/kb/Creator/000117CR yes I have the latest firmware version from LG 1.01 Link to comment Share on other sites More sharing options...
cdanteek Posted February 15, 2007 Report Share Posted February 15, 2007 What LG drive? Have you tried creator classic to burn the iso? If that won't work try imgburn (Google) free iso burn tool, in test mode at 2.4X cd Link to comment Share on other sites More sharing options...
ridebouk Posted February 16, 2007 Author Report Share Posted February 16, 2007 As far as I can tell you have an external USB drive - is it connected to a USB2 port? (you could have problems if your port us only USB 1.1) Also, you may be having problems with the media. Just because it has the same label as before, it needn't be from the same source (a lot of media is outsourced and simply re-labelled) The write speed is determined by the drive firmware btw - it reads a small info track on the disc which tells it the designed speed, size and type - this is then reported back to the program and that then sends the data at a speed to match Yes, LG HL-DT-ST DVDRRW GSA-2166D is connected to a 2.0 USB port. it works fine with burning DVD+_ R or RW. Eversince I installed Creator 9, I noticed that I'm only having writing errors with DVD+R DL. it's not only with burning my DVD projects or images, I couldn't burn data files too on DVD+R DL. I know that writre speed is determined by the drive firmware/disc info. Philips: 2.4x certified, Memorex: up to 2.4x . but the drive is writing at 4.0x (5.4MB/Sec) on both types od discs. Link to comment Share on other sites More sharing options...
malatekid Posted February 16, 2007 Report Share Posted February 16, 2007 Going back to the iso image, does the preview look fine? You can preview the iso file by using Disc Copier and using the Preview tool there. Link to comment Share on other sites More sharing options...
ridebouk Posted February 15, 2007 Author Report Share Posted February 15, 2007 What LG drive? Have you tried creator classic to burn the iso?If that won't work try imgburn (Google) free iso burn tool, in test mode at 2.4X cd I'm using LG HL-DT-ST DVDRRW GSA-2166D (USB) firmware 1.01 I just tried creator classic. it did start the image burning process, got to 13% & I got an error: End of user area encountered on this track - Illegal request there was an error trying to open the file I tried to burn data files on a DVD+R DL & It started the process but a few minutes later got an error: Sense: 03 ASC: 80 ASCQ: 04 (Command 2A) ------------------------------------------------------- Px.dll: 3.0.88.500 PxAFS.DLL: 3.2.41.500 pxdrv.dll: 1.1.94.0 PxMas.dll: 3.0.88.500 PxSFS.DLL: 3.0.88.500 PxWave.dll: 3.0.88.500 pxwma.dll: 1.0.0.3 lost 2 DVD+R DL I noticed that the media burn speed is set to 4x while the DVD+R DL is 2.4 Even in Roxio Classic I only had the option of 4x. I tried imgburn. it couldn't burn the image too! the burn process didn't start. I know for sure that I was burning the same brands of DVD+R DL on the same system & LG drive using My DVD Studio Deluxe v 6.1. I burned data & movie DVD projects on DVD+R DL. Link to comment Share on other sites More sharing options...
cdanteek Posted February 16, 2007 Report Share Posted February 16, 2007 I know that writre speed is determined by the drive firmware/disc info. Philips: 2.4x certified, Memorex: up to 2.4x . but the drive is writing at 4.0x (5.4MB/Sec) on both types od discs. Here is the same Verbatim +R DL disc in two different burners and EMC 9 DVDinfo Pro! Look for the Available Write Descriptor. The Plextor will burn the disc at 2.4, 4, and 6 X and produce a good disc. The BenQ will only burn the disc at 2.4 X any faster and I get what you get a coaster! Check your media before you burn and only burn at the Available Write Descriptors. Media Information Plextor DVDR 716A firmware 1.09 Region information N/A not a DVD-VIDEO Media code/Manufacturer ID MKM 001 Media Product Revision Number 00h Format Capacity Blank Disc Free Blocks 4253024256 Free Capacity 7.96GB(8.55GB) Book Type DVD+R DL Media Type DVD+R DL Manufacturer Rated Speed 2.4x 3324KBps Available Write Descriptor CLV 6.0x 8310KBps Available Write Descriptor CLV 4.0x 5540KBps Available Write Descriptor CLV 2.4x 3324KBps Data area starting sector 30000h Layer 0 end sector 22D7FFh Linear Density 0.293um/bit Track Density 0.74um/track Number of Layers 2 Layer Track Path direction (OTP) Opposite track path Complete Media Code 00000000 01 02 00 00 E1 0F 32 10 00 03 00 00 00 FC FF FF ......2......... 00000010 00 22 D7 FF 00 00 00 4D 4B 4D 00 00 00 00 00 30 .".....MKM.....0 00000020 30 31 00 40 25 25 37 0C 02 2F 63 02 2F 63 21 23 01.@%%7../c./c!# 00000030 0D 0E 14 14 02 01 01 10 00 21 23 0D 0E 14 14 02 .........!#..... Media Information BenQ DVD LS DW1655 firmware BCIB Region information N/A not a DVD-VIDEO Media code/Manufacturer ID MKM 001 Media Product Revision Number 00h Format Capacity Blank Disc Free Blocks 4253024256 Free Capacity 7.96GB(8.55GB) Book Type DVD+R DL Media Type DVD+R DL Manufacturer Rated Speed 2.4x 3324KBps Available Write Descriptor CLV 2.4x 3324KBps Linear Density Blank Disc Track Density Unknown Number of Layers 1 Complete Media Code 00000000 01 02 00 00 E1 0F 32 10 00 03 00 00 00 FC FF FF ......2......... 00000010 00 22 D7 FF 00 00 00 4D 4B 4D 00 00 00 00 00 30 .".....MKM.....0 00000020 30 31 00 40 25 25 37 0C 02 2F 63 02 2F 63 21 23 01.@%%7../c./c!# 00000030 0D 0E 14 14 02 01 01 10 00 21 23 0D 0E 14 14 02 .........!#..... cd Link to comment Share on other sites More sharing options...
gi7omy Posted February 15, 2007 Report Share Posted February 15, 2007 As far as I can tell you have an external USB drive - is it connected to a USB2 port? (you could have problems if your port us only USB 1.1) Also, you may be having problems with the media. Just because it has the same label as before, it needn't be from the same source (a lot of media is outsourced and simply re-labelled) The write speed is determined by the drive firmware btw - it reads a small info track on the disc which tells it the designed speed, size and type - this is then reported back to the program and that then sends the data at a speed to match Link to comment Share on other sites More sharing options...
Question
ridebouk
I had xactly the same problem. I saved an iso image.
whenever I try to burn it I get the message:
this disc is incompatible with the sourse disc.
I tried different brands, but still the same message!
any suggestions?
Link to comment
Share on other sites
11 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.