Jump to content
  • Who's Online   0 Members, 0 Anonymous, 9 Guests (See full list)

    • There are no registered users currently online

6.0 plat


Recommended Posts

Hello. I know this is not 6.0 but maybe someone could help me. 6.0 was working great only problem every now and then when coping a disk that I mad I would get a sourse error, I worked around that. Yesteday it happened again so I said I am going to fix it. I put the roxio disk back in and now I can't get the disk copier to open up, it says cant read the recorders. When I open up the creater classic In the botton right it says defalt recorder NONE. But the drag to disk shows my three burners. So can someone help me. I have unistal and reinstall about 10-12 times tryied the repair part and still have a problem. I have scaned the hard drive, defrag, clean everything and still problem, I did restore to later date it worked but suddenly it quit again. So Please can someone help

 

 

Please respond to thehyland@aol.com Thanks Jerry

 

Hello. I know this is not 6.0 but maybe someone could help me. 6.0 was working great only problem every now and then when coping a disk that I mad I would get a sourse error, I worked around that. Yesteday it happened again so I said I am going to fix it. I put the roxio disk back in and now I can't get the disk copier to open up, it says cant read the recorders. When I open up the creater classic In the botton right it says defalt recorder NONE. But the drag to disk shows my three burners. So can someone help me. I have unistal and reinstall about 10-12 times tryied the repair part and still have a problem. I have scaned the hard drive, defrag, clean everything and still problem, I did restore to later date it worked but suddenly it quit again. So Please can someone help

Please respond to thehyland@aol.com Thanks Jerry

 

 

p.s. nero works fine.

Link to comment
Share on other sites

Is Nero's InCD installed? If so, remove it and drag-to-disc. The two conflict, and its not a great idea to have either of them on your system. Also, If you have IE 7 or WMP 11 installed, roll back to the previous version of each.

Link to comment
Share on other sites

Thanks so far. I have had the roxio 6.0 plat for about three years and have had the nero for about 1.5 years with no conflicts. I am using media player 10 and have done so for the same amount of time. The drag to disk works or did work fine, it is showing me the three burning drives. What is IE7? I know there can be a simple fix, download something that makes this program read the recorders for each, creater classic and the disk copier.

 

Next question, just say I wanted to update to the 9.0 can someone give me some good and I mean good feed back. When I updated from the 5.0 to the 6.0 the disk to drag program would not read cdrw's, so I had to format all of them and start over.

 

Next question I dont use the 6.0 but to burn stuff and save stuff with the drag to disk. Is there another program that might be better then roxio, becuase the dvd builder, photo suit I dont use. I love my pinnacle for dvd's

 

 

Is the 9.0 good or is it crap.

 

 

Thanks Jerry THEHYLAND@AOL.COM

 

Thanks so far. I have had the roxio 6.0 plat for about three years and have had the nero for about 1.5 years with no conflicts. I am using media player 10 and have done so for the same amount of time. The drag to disk works or did work fine, it is showing me the three burning drives. What is IE7? I know there can be a simple fix, download something that makes this program read the recorders for each, creater classic and the disk copier.

 

Next question, just say I wanted to update to the 9.0 can someone give me some good and I mean good feed back. When I updated from the 5.0 to the 6.0 the disk to drag program would not read cdrw's, so I had to format all of them and start over.

 

Next question I dont use the 6.0 but to burn stuff and save stuff with the drag to disk. Is there another program that might be better then roxio, becuase the dvd builder, photo suit I dont use. I love my pinnacle for dvd's

Is the 9.0 good or is it crap. P.S. I also had roxio 5.0 plat in my system and all three programs worked.

Thanks Jerry THEHYLAND@AOL.COM

Link to comment
Share on other sites

Thanks so far. I have had the roxio 6.0 plat for about three years and have had the nero for about 1.5 years with no conflicts. I am using media player 10 and have done so for the same amount of time. The drag to disk works or did work fine, it is showing me the three burning drives. What is IE7? I know there can be a simple fix, download something that makes this program read the recorders for each, creater classic and the disk copier.

 

Next question, just say I wanted to update to the 9.0 can someone give me some good and I mean good feed back. When I updated from the 5.0 to the 6.0 the disk to drag program would not read cdrw's, so I had to format all of them and start over.

 

Next question I dont use the 6.0 but to burn stuff and save stuff with the drag to disk. Is there another program that might be better then roxio, becuase the dvd builder, photo suit I dont use. I love my pinnacle for dvd's

 

 

Is the 9.0 good or is it crap.

 

 

Thanks Jerry THEHYLAND@AOL.COM

 

Have you tried the built in burning capabilities in XP (this is assuming you have XP as you did not say what O/S you have).

 

For more info on D2D read this http://forums.support.roxio.com/index.php?...c=14628&hl=

Link to comment
Share on other sites

Have you tried the built in burning capabilities in XP (this is assuming you have XP as you did not say what O/S you have).

 

For more info on D2D read this http://forums.support.roxio.com/index.php?...c=14628&hl=

No I did not try using the xp burning program, is it good,But I still will need to beable to look at the cdrw and dvdrw with roxio.

 

 

 

 

Thanks Jerry

Link to comment
Share on other sites

No I did not try using the xp burning program, is it good,But I still will need to beable to look at the cdrw and dvdrw with roxio.

Thanks Jerry

 

 

Ok Mr. James and who ever can help me. I am using Roxio Easy CD & DVD Creator Home 6.2.0.110

updates

audio v1.1.0.277.exe

creator v6.2.0.111.exe

drgds v6.2.0.110.exe

du20041203.exe

engine v6.2.0.134.exe

label v6.2.0.110.exe

 

system windows xp

home edition

version 2002

service pack 2

hp pavilion

pentium® 4 cpu 2.60ghz

2.60ghz, 2.24gb of ram

 

I have one dvd/cd rom internal

one cd burner internal

one polaroid cd burner external

one hp dvd740e dvd+-/+-rw 16x

double-layer lightscribe drive

one all in one media reader for camera cards

 

 

Hope this helps Jerry Thehyland

Link to comment
Share on other sites

What is IE7?

 

Is the 9.0 good or is it crap.

 

IE7 is Internet Explorer 7 and it breaks the version that you have. You can get the program to work again by uninstalling IE7 and using Internet Explorer 6.

 

The link on how to uninstall it is here http://forums.support.roxio.com/index.php?showtopic=23162

 

As far as version 9, you need a computer that exceeds the recommended specifications.

 

If all you're doing is burning CDs, you'd be better off burning them with the built in XP burning tool as ogdens recommended. Go to the Windows Help and type ' write to CD ' for instructions.

Link to comment
Share on other sites

Ok Mr. James and who ever can help me. I am using Roxio Easy CD & DVD Creator Home 6.2.0.110

updates

audio v1.1.0.277.exe

creator v6.2.0.111.exe

drgds v6.2.0.110.exe

du20041203.exe

engine v6.2.0.134.exe

label v6.2.0.110.exe

 

system windows xp

home edition

version 2002

service pack 2

hp pavilion

pentium® 4 cpu 2.60ghz

2.60ghz, 2.24gb of ram

 

I have one dvd/cd rom internal

one cd burner internal

one polaroid cd burner external

one hp dvd740e dvd+-/+-rw 16x

double-layer lightscribe drive

one all in one media reader for camera cards

120 gig hard drive

250 ext hard drive

Hope this helps Jerry Thehyland

 

 

IE7 is Internet Explorer 7 and it breaks the version that you have. You can get the program to work again by uninstalling IE7 and using Internet Explorer 6.

 

The link on how to uninstall it is here http://forums.support.roxio.com/index.php?showtopic=23162

 

As far as version 9, you need a computer that exceeds the recommended specifications.

 

If all you're doing is burning CDs, you'd be better off burning them with the built in XP burning tool as ogdens recommended. Go to the Windows Help and type ' write to CD ' for instructions.

 

 

I am using IE6 I also back everything up with cdrw and dvd rws, every thing. Thanks Jerry

 

I am using IE6 I also back everything up with cdrw and dvd rws, every thing. Thanks Jerry

p.s. is my system good for the 9.0

Link to comment
Share on other sites

If you are "backing up" to RW media, you aren't really backing up, owing to the fact the it will fade to blank over time. Since about 2002, when a new, cheaper coating was discovered, they are less stable. They generally last months, but can be weeks or years. If formatted for Packet-Witing (Drag2Disc, Nero's InCD, Sonic's DLA, etc) they generally will fail faster.

 

And, of course, different brands cannot read each other's formatting, and often different Versions of the same brand can't be cross-readable.

 

You do NOT have a "great-big floppy-disc", you have a disaster in waiting.

 

For long-term backups use R media, and DO NOT FORMAT. WinXP's built-in burning would work fine for that.

 

Lynn

 

Edit: PS - it's not a good idea to post your email address, since thise are public Forums searched by google and other search engines, which in turn are searched by spammers seeking to "harvest" email addresses for spamming purposes.

 

However, since your email has been copied into several of the replies, it's probably too late now :(

Link to comment
Share on other sites

If you are "backing up" to RW media, you aren't really backing up, owing to the fact the it will fade to blank over time. Since about 2002, when a new, cheaper coating was discovered, they are less stable. They generally last months, but can be weeks or years. If formatted for Packet-Witing (Drag2Disc, Nero's InCD, Sonic's DLA, etc) they generally will fail faster.

 

And, of course, different brands cannot read each other's formatting, and often different Versions of the same brand can't be cross-readable.

 

You do NOT have a "great-big floppy-disc", you have a disaster in waiting.

 

For long-term backups use R media, and DO NOT FORMAT. WinXP's built-in burning would work fine for that.

 

Lynn

 

Edit: PS - it's not a good idea to post your email address, since thise are public Forums searched by google and other search engines, which in turn are searched by spammers seeking to "harvest" email addresses for spamming purposes.

 

However, since your email has been copied into several of the replies, it's probably too late now :(

 

 

Thank you for your help. I use the rw's for current stuff and after a while I burn cdr disk and dvdr+ disk

that way I have a solid hard copy. Is this right

 

Thanks Jerry

Link to comment
Share on other sites

You'd be better off to burn directly to CD-R making an appendable data disc.

 

Both Creator Classic and WinXP burning do that.

 

Lynn

I have not tried xp burner because I have the roxio, but my roxio creator classic and disc copier are not working will not read recorders.

 

 

Thanks Jerry

Link to comment
Share on other sites

I get the impression what you think you want to do is format the disc and use it "like a great-big floppy-disc".

 

Formatting the disc is a great way to permantly LOSE the info if used for archiving purposs.

 

Using RW media is a great way to permantly lose info.

 

Used together, you lose the info faster.

 

I'm suggesting an altrnative which avoids at least one of the problems.

 

Lynn

Link to comment
Share on other sites

I get the impression what you think you want to do is format the disc and use it "like a great-big floppy-disc".

 

Formatting the disc is a great way to permantly LOSE the info if used for archiving purposs.

 

Using RW media is a great way to permantly lose info.

 

Used together, you lose the info faster.

 

I'm suggesting an altrnative which avoids at least one of the problems.

 

Lynn

Thanks Lynn but that is not why I am here. I have or had no problems with the rw or cd's or dvds. I keep cdrw's for current and about every 3-6mo I burn to cdr or dvdr+, that way I have two copies.

 

 

MY problem is that my disk copier and creater classic will not reconize the recorders, so how do I fix.

I have read alot of post and have done most everything to no solution. This sucks because I have had roxio 5.0.6.0, and nero all on the same comp with no problems for about 2 years now. Then suddenly after putting the 6.0 disk in to repair, BOOM NOW I HAVE A PROBLEM WHAT THE H*LL. seems to be there sould be a quick and normal fix. So can anybody help me with that problem or should I right off roxio for good, I have spent over 22 hrs trying to fix.

 

 

Thanks Jerry not a happy person right now

Link to comment
Share on other sites

Thanks Lynn but that is not why I am here. I have or had no problems with the rw or cd's or dvds. I keep cdrw's for current and about every 3-6mo I burn to cdr or dvdr+, that way I have two copies.

 

 

MY problem is that my disk copier and creater classic will not reconize the recorders, so how do I fix.

I have read alot of post and have done most everything to no solution. This sucks because I have had roxio 5.0.6.0, and nero all on the same comp with no problems for about 2 years now. Then suddenly after putting the 6.0 disk in to repair, BOOM NOW I HAVE A PROBLEM WHAT THE H*LL. seems to be there sould be a quick and normal fix. So can anybody help me with that problem or should I right off roxio for good, I have spent over 22 hrs trying to fix.

 

 

Thanks Jerry not a happy person right now

 

Try this http://kb.roxio.com/content/kb/Creator/EEZ000005

Link to comment
Share on other sites

 

 

I have already tried this I did the one where roxio is instal. My windows can see the recorders, they work, I can even burn with nero. MY PROBLEM IS WITH ROXIO ONLY. when I try to do a disk copy, no recorder is supported, when I open creator classic everything is there but the recorders, the default recoRder says "NONE". every other program in roxio works. So what is the fix.

 

 

Thanks Jerry not to happy

Link to comment
Share on other sites

I have already tried this I did the one where roxio is instal. My windows can see the recorders, they work, I can even burn with nero. MY PROBLEM IS WITH ROXIO ONLY. when I try to do a disk copy, no recorder is supported, when I open creator classic everything is there but the recorders, the default recoRder says "NONE". every other program in roxio works. So what is the fix.

 

 

Thanks Jerry not to happy

 

Have you tried uninstalling/re-installing

 

Go into add/remove programs and remove Roxio.

Next use this program to remove anything left over Roxizap is at - http://tools.roxio.com/support/tools/roxizap.exe

 

Install from your installation disc.

 

If your recorders are still not recognized go to the Software Update page and follow directions.

Link to comment
Share on other sites

Mmmm ... if you have a formatted disc in the drive, whether formatted by Nero or Roxio (and since the formatting is incompatible, neither would be able to read the other) - remove it. Put in a BLANK blank, directly off the spindle or out of the package.

 

Lynn

Link to comment
Share on other sites

Again Lynn u are not on the same page, please no more responses about formatted disk, I have that under control.

 

 

Jerry

 

 

OK What have I done. I uninstal roxio 5.0, 6.0, roxizap, searched and deleted roxio stuff, scan the hard drive, defrag the hard drive, update norton, full system scan with norton, scan hard drive again and defrag.

 

All of my drives work with windows, I can see them in My comp, I can open with the eject from the comp and not even touch the drive. the device mang says each drive is working, so no more problems.

 

I put the roxio 6.0 in and did a install. everything good so far. once done program says to reboot. Once I do that my system crashes and I cant even start windows. I have to restore in safe mode to last saved restore point. I did this couple of times and same thing. Once I get back to windows in the normal setting no roxio on the desk top. If I go to explore the shared file is there and so is the roxio program. One point to make is when I open the program up there is no exe files in any of the folder. The strange thing is in safe mond roxio is on the desk top and everything works but for the creator classic. When I try to open it I get a "can not initalize API. When I go back to the normal mode for windows no roxio on the desk top. What is API and were do I go from here.

 

 

Thanks Jerry yesterday I spend over 12 hrs on this dam thing for one program

Link to comment
Share on other sites

Again Lynn u are not on the same page, please no more responses about formatted disk, I have that under control.

Jerry

OK What have I done. I uninstal roxio 5.0, 6.0, roxizap, searched and deleted roxio stuff, scan the hard drive, defrag the hard drive, update norton, full system scan with norton, scan hard drive again and defrag.

 

All of my drives work with windows, I can see them in My comp, I can open with the eject from the comp and not even touch the drive. the device mang says each drive is working, so no more problems.

 

I put the roxio 6.0 in and did a install. everything good so far. once done program says to reboot. Once I do that my system crashes and I cant even start windows. I have to restore in safe mode to last saved restore point. I did this couple of times and same thing. Once I get back to windows in the normal setting no roxio on the desk top. If I go to explore the shared file is there and so is the roxio program. One point to make is when I open the program up there is no exe files in any of the folder. The strange thing is in safe mond roxio is on the desk top and everything works but for the creator classic. When I try to open it I get a "can not initalize API. When I go back to the normal mode for windows no roxio on the desk top. What is API and were do I go from here.

Thanks Jerry yesterday I spend over 12 hrs on this dam thing for one program

 

Is there a way to transfer the program in safe mode to normal mode.

 

 

Thanks Jerry :unsure:

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...