CharlieR Posted July 28, 2007 Report Share Posted July 28, 2007 I have got some new DVD that are 16* write speed and can't seem to burn dvd's now and keep getting "error code = 0*80004005" Any ideas Secondly when i put background music on the intro pages it plays 30 secs and then starts again. Can this be changed? Fogot to say it is on Videowave 7 Cheers Charlie Link to comment Share on other sites More sharing options...
grandpabruce Posted July 28, 2007 Report Share Posted July 28, 2007 I have got some new DVD that are 16* write speed and can't seem to burn dvd's now and keep getting "error code = 0*80004005" Any ideas Secondly when i put background music on the intro pages it plays 30 secs and then starts again. Can this be changed? Fogot to say it is on Videowave 7 Cheers Charlie Try updating the firmware for your burner. It may not be properly recognizing your DVD media. You're stuck with the 30 seconds on the music. Link to comment Share on other sites More sharing options...
CharlieR Posted July 28, 2007 Author Report Share Posted July 28, 2007 Try updating the firmware for your burner. It may not be properly recognizing your DVD media. You're stuck with the 30 seconds on the music. Thanks again for that. Firmware is updated, can I change the burn speed as the 4* disc worked after trying the 16* disc. Cheers Charlie Link to comment Share on other sites More sharing options...
gi7omy Posted July 28, 2007 Report Share Posted July 28, 2007 For video DVDs I'd tend to stick to 4x - ones burnt at a higher speed seem to have problems when it comes to playing them in a standalone player Link to comment Share on other sites More sharing options...
CharlieR Posted July 28, 2007 Author Report Share Posted July 28, 2007 Just burnes=d a 4* DVD and tried a 16* dvd with burn rate at 1 and did not work. Any ideas please, Charlie Link to comment Share on other sites More sharing options...
grandpabruce Posted July 29, 2007 Report Share Posted July 29, 2007 Just burnes=d a 4* DVD and tried a 16* dvd with burn rate at 1 and did not work. Any ideas please, Charlie Charlie, first, it is tough to decipher how you are describing what you are doing. Forget the 4*, it is 4X. If you have the firmware updated for your burner, and you try to burn at a slower speed, and you still have a failure, then either your burner is junk or your media is junk. I would try changing media brand or type. What media are you using? What burner do you have? Link to comment Share on other sites More sharing options...
CharlieR Posted July 29, 2007 Author Report Share Posted July 29, 2007 Charlie, first, it is tough to decipher how you are describing what you are doing. Forget the 4*, it is 4X. If you have the firmware updated for your burner, and you try to burn at a slower speed, and you still have a failure, then either your burner is junk or your media is junk. I would try changing media brand or type. What media are you using? What burner do you have? It is 4x If by media you mean discs then they are phillips dvd - r 4.7gb 120 min Burner is an NEC DVD RW ND 3500AG Can I set Roxio to burn only at 1x or 4x Cheers Link to comment Share on other sites More sharing options...
cdanteek Posted July 29, 2007 Report Share Posted July 29, 2007 CharlieR, the only Phillips Media I see in the NEC (Firmware: NEC DVD_RW ND-3500AG 2.1B) Are, DVD+R9 Dual Layer PHILIPS CD2-000 2.4x, PHILIPS PD2-000 2.4x and, DVD+R5 Single Layer Philips 081-000 8x,6x,4x,2.4x, Philips 081-001 8x,6x,4x,2.4x. The Drive will only burn at a X speed it reads from it's own firmware and from the media your using the media ID (MID). If the media isn't in the firmware it takes on a generic write strategy usually 4X. That sounds like the case with your DVD -R disc's. Use one of the free programs below to see the Write Speed Descriptor(s) or Write speeds for the media your using. Disc & Book Type : [DVD-R] - [DVD-R] Manufacturer Name : [Mitsubishi Chemical Corp.] Manufacturer ID : [MCC 02RG20 ] Blank Disc Capacity : [2,298,496 Sectors = 4.71 GB (4.38 GiB)] ---------------------------------------------------------------------------- ** INFO : Drive = BENQ DVD LS DW1655 [FW BCGB] ** INFO : Write Capabilities = DVD+R DVD+R-DL DVD+RW ** INFO : Write Capabilities = DVD-R DVD-R-DL DVD-RW ** INFO : Disc = [DVD-R:MCC 02RG20 ] ** INFO : Reference Speed : 1x DVD = 1385 kBps ** INFO : An Writeable Disc Is Recommended For Accurate Results ** INFO : Write Speeds (Supported By This Drive On This Disc) Listed Below ** INFO : GET PERFORMANCE Write Speed Descriptor(s) Descriptor #1 = 11080 kBps ( 8.00x) - [CLV/Non-Pure CAV] Descriptor #2 = 5540 kBps ( 4.00x) - [CLV/Non-Pure CAV] Descriptor #3 = 3324 kBps ( 2.40x) - [CLV/Non-Pure CAV] ** INFO : MODE SENSE Write Speed Descriptor(s) [Legacy Command] ** WARNING : MODE SENSE Is Obsolete And Not Always Properly Supported Descriptor #1 = 11080 kBps ( 8.00x) - [CLV/Non-Pure CAV] Descriptor #2 = 5540 kBps ( 4.00x) - [CLV/Non-Pure CAV] Descriptor #3 = 3324 kBps ( 2.40x) - [CLV/Non-Pure CAV] ---------------------------------------------------------------------------- ** INFO : Hex Dump Of 'Media Code'-Block Listed Below ** INFO : 4-Byte Header Preceding 'Media Code'-Block Discarded ** INFO : Format 0Eh - Pre-Recorded Information In Lead-In 0000 : 01 40 c1 fd 9e d8 52 00 02 85 0d 10 88 9a 80 00 .@....R......... 0010 : 03 4d 43 43 20 30 32 00 04 52 47 32 30 20 20 00 .MCC 02..RG20 . 0020 : 05 88 80 00 00 00 02 00 06 09 0d 13 87 78 80 00 .............x.. 0030 : 07 88 80 00 00 00 00 00 08 05 15 0d 10 0b 0a 00 ................ 0040 : 09 98 08 0f 0b 78 88 00 0a 80 00 00 00 00 10 00 .....x.......... 0050 : 0b 07 19 15 a7 88 75 00 0c 99 bc aa a2 20 22 00 ......u...... ". 0060 : 0d 00 00 d0 00 00 00 00 00 00 .......... ** INFO : Hex Dump Of 'Control Data Zone'-Block Listed Below ** INFO : 4-Byte Header Preceding 'CDZ'-Block Discarded ** INFO : Format 10h - Physical Format Information Of Control Data Zone 0000 : 25 0f 02 00 00 03 00 00 00 26 12 7f 00 00 00 00 %........&...... ---------------------------------------------------------------------------- [ DVD Identifier V4.2.0 - http://DVD.Identifier.CDfreaks.com ] ---------------------------------------------------------------------------- Nero CD-DVD Speed: Disc Info In Plextor PX 716A Basic Information Disc type: : DVD+R Book Type : DVD+R Manufacturer: : Verbatim MID : MCC 004 000 (00) Write speeds: : 4 X - 8 X - 12 X - 16 X Blank Capacity : 4.38 GB : 4482 MB : 4700375040 bytes Extended Information Layers : 1 Write strategies : 4 X Disc Status : Empty Raw Data ADIP Information (11h) 0000 - A1 0F 02 00 00 03 00 00 00 26 05 3F 00 00 00 00 - .........&.?.... 0010 - 00 00 07 4D 43 43 00 00 00 00 00 30 30 34 00 38 - ...MCC.....004.8 0020 - 23 54 37 12 02 54 6C 02 92 5F 15 15 0B 0B 08 08 - #T7..Tl.._...... 0030 - 01 19 1B 0C 0C 0C 0D 01 00 00 00 00 00 00 00 00 - ................ 0040 - 01 00 38 38 02 2C 5A 1A 05 2E 23 10 04 1E 1D 01 - ..88.,Z...#..... 0050 - 00 00 02 2C 5A 1A 05 2E 23 10 04 1E 1D 01 00 00 - ...,Z...#....... Download here....http://DVD.Identifier.CDfreaks.com CD-DVD Speed 4.7.5.0....http://www.cdspeed2000.com/ cd Link to comment Share on other sites More sharing options...
Question
CharlieR
I have got some new DVD that are 16* write speed and can't seem to burn dvd's now and keep getting "error code = 0*80004005"
Any ideas
Secondly when i put background music on the intro pages it plays 30 secs and then starts again. Can this be changed?
Fogot to say it is on Videowave 7
Cheers
Charlie
Link to comment
Share on other sites
7 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.