Can't Burn Image...sometimes

[Monty_]

Ok, this has happened several times, on and off, while attmepting to burn a DVD image. Its occurrence seems to be random, and some times it works after waiting a period of time, and some times not. When attempting to burn a DVD image I get the error "There was a problem writing to disk" and the 'Advanced" button shows the following messages:

 

Sense: 05 ASC: 26 ASCQ: 00 (Command BF)

-------------------------------------------------------

px.dll: 3.4.46.500

pxafs.dll: 3.4.46.500

pxdrv.dll: 1.2.1.0

pxmas.dll: 3.4.46.500

pxsfs.dll: 3.4.46.500

pxwave.dll: 3.4.46.500

pxwma.dll: 1.0.0.3

 

Does any one know what this means?

[cdanteek]

>1.To identify your drive in XP. Right click my computer and click properties. The system properties window opens, click the Hardware tab and then click

>device manager. The Device Manager Window opens, from the top, view, make sure a dot is next to view devices by type. Click the + next to DVD/CD-Rom

>Drives, post what it reads? For the firmware version, right click the drive/s and click properties, click the details tab. It should show, example mine

>IDECDROMBENQ_DVD_DD_DW1640_______________BSRB_____. The # where my BSRB is, is what we need you to post with the drive model/name.

 

For my system it's IDE\CDROMPIONEER_DVD-RW__DVR-111D________________1.29____. As far as I can tell, that's the latest firmware version: 1.29.

 

>2.If your drives are on IDE and the Secondary IDE Channel, most are unless you have a newer pc with SATA Drives.

>In Device manager like above, Click the + next to IDE ATA/ATAPI controllers, highlight the Secondary IDE Channel, right click on it uninstall, close the

>windows and reboot/restart the pc.

 

Done, to no avail, but I'll keep that trick handy for other things

 

>3.Click #3 in my signature below and check your settings.

 

"DMA if available" is set on.

 

Monty,

 

what a pleasure to have someone actually answer all the questions instead of posting,

 

so the hint doesn't appear relevant.

 

I downloaded your PIONEER_DVD-RW__DVR-111D 1.29 firmware and extracted all the media ID/ manufacture ID (MID) codes for that firmware. If you like, I could PM them for you to keep as a reference?

 

The ISO image you have that had the error, where did it come from, and did the Roxio EMC 9 software make it, if so what application?

 

What X speed are you burning to the disc's " Verbatim and Memorex "?

 

Open your Roxio EMC 9 programs, tools, DVDInfo Pro. Put a Verbatim disc in the drive, make sure the drive is showing at the bottom of DVDInfo Pro window. Now click the Info tab at top and then click the clipboard. It saves the data to the PC clipboard and you can right click paste here in a reply post, like below, do a Memorex disc also.

 

DVDInfo Pro in Plextor 716A Media Information

Region information N/A not a DVD-VIDEO

Media code/Manufacturer ID MCC 004

Media Product Revision Number 00h

Format Capacity Blank Disc

Free Blocks 405405696

Free Capacity 4.38GB(4.70GB)

Book Type DVD+R

Media Type DVD+R

Manufacturer Rated Speed 16.0x 22160KBp

Available Write Descriptor CLV 16.0x 22160KBps

Available Write Descriptor CLV 12.0x 16620KBps

Available Write Descriptor CLV 8.0x 11080KBps

Available Write Descriptor CLV 6.0x 8310KBps

Available Write Descriptor CLV 4.0x 5540KBps

Data area starting sector 30000h

Linear Density 0.267um/bit

Track Density 0.74um/track

Number of Layers 1

 

Complete Media Code

00000000 01 02 00 00 A1 0F 02 00 00 03 00 00 00 26 05 3F .............&.?

00000010 00 00 00 00 00 00 07 4D 43 43 00 00 00 00 00 30 .......MCC.....0

00000020 30 34 00 38 23 54 37 12 02 54 6C 02 92 5F 15 15 04.8#T7..Tl.._..

00000030 0B 0B 08 08 01 19 1B 0C 0C 0C 0D 01 00 00 00 00 ................

 

cd

[ogdens]

Ok, this has happened several times, on and off, while attmepting to burn a DVD image. Its occurrence seems to be random, and some times it works after waiting a period of time, and some times not. When attempting to burn a DVD image I get the error "There was a problem writing to disk" and the 'Advanced" button shows the following messages:

 

Sense: 05 ASC: 26 ASCQ: 00 (Command BF)

-------------------------------------------------------

px.dll: 3.4.46.500

pxafs.dll: 3.4.46.500

pxdrv.dll: 1.2.1.0

pxmas.dll: 3.4.46.500

pxsfs.dll: 3.4.46.500

pxwave.dll: 3.4.46.500

pxwma.dll: 1.0.0.3

 

Does any one know what this means?

 

A 'Sense' error is referring to a hardware/media problem. Try using a different brand of disc Verbatim / Sony and TDK are good media to look for too.

 

 

 

[Monty_]

A 'Sense' error is referring to a hardware/media problem. Try using a different brand of disc Verbatim / Sony and TDK are good media to look for too.

 

I've tried it with Verbatim and Memorex disks, several different ones of each, all with the same results.

[cdanteek]

I've tried it with Verbatim and Memorex disks, several different ones of each, all with the same results.

 

 

1.To identify your drive in XP. Right click my computer and click properties. The system properties window opens, click the Hardware tab and then click device manager. The Device Manager Window opens, from the top, view, make sure a dot is next to view devices by type. Click the + next to DVD/CD-Rom Drives, post what it reads? For the firmware version, right click the drive/s and click properties, click the details tab. It should show, example mine IDECDROMBENQ_DVD_DD_DW1640_______________BSRB_____. The # where my BSRB is, is what we need you to post with the drive model/name.

 

2.If your drives are on IDE and the Secondary IDE Channel, most are unless you have a newer pc with SATA Drives.

In Device manager like above, Click the + next to IDE ATA/ATAPI controllers, highlight the Secondary IDE Channel, right click on it uninstall, close the windows and reboot/restart the pc.

 

3.Click #3 in my signature below and check your settings.

 

 

**052600 1 2 3 4 5 Invalid field in parameter list.

These errors are difficult to specify a cause for. Most of the times the problem is in the system.

 

Read click here.

 

cd

 

 

[Monty_]

>

>1.To identify your drive in XP. Right click my computer and click properties. The system properties window opens, click the Hardware tab and then click

>device manager. The Device Manager Window opens, from the top, view, make sure a dot is next to view devices by type. Click the + next to DVD/CD-Rom

>Drives, post what it reads? For the firmware version, right click the drive/s and click properties, click the details tab. It should show, example mine

>IDECDROMBENQ_DVD_DD_DW1640_______________BSRB_____. The # where my BSRB is, is what we need you to post with the drive model/name.

 

For my system it's IDE\CDROMPIONEER_DVD-RW__DVR-111D________________1.29____. As far as I can tell, that's the latest firmware version: 1.29.

 

>2.If your drives are on IDE and the Secondary IDE Channel, most are unless you have a newer pc with SATA Drives.

>In Device manager like above, Click the + next to IDE ATA/ATAPI controllers, highlight the Secondary IDE Channel, right click on it uninstall, close the

>windows and reboot/restart the pc.

 

Done, to no avail, but I'll keep that trick handy for other things

 

>3.Click #3 in my signature below and check your settings.

 

"DMA if available" is set on.