Ducmaster Posted November 25, 2008 Report Share Posted November 25, 2008 I have exactly the same error. I did a clean install (several times), I never had .NET 3.5 SP1 installed (only 3.5) , my milcore.dll is there alright,... BUT it still doesn't work !! The error appears when I load Roxio Central. On the splash screen, you see the modules Roxio is loading. I remarked that the error doesn't appear every time at the same module. Sometimes it is after 2 modules, sometimes nearly at the end.... Anyone ???? HELP. Link to comment Share on other sites More sharing options...
Ducmaster Posted November 27, 2008 Author Report Share Posted November 27, 2008 Hi, No, my other post was about the "xxxx.png found but could not be loaded". That has been solved thanks to the "pinned" procedure. The problem that remains is when RoxioCentral starts; You see the splash screen and after a while (this can be a few seconds or 10 seconds) the MS message "this application has encountered....." appears. I've read the posts on the .NET 3.5 SP1 issue, but apparently the result is the same but the cause is not..... I have .NET 3.5 but not SP1 and milcore.dll is there allright. I did already several clean installs without success. Regards Link to comment Share on other sites More sharing options...
Ducmaster Posted December 3, 2008 Author Report Share Posted December 3, 2008 Hello, I did a clean install, installed the fix, but the problem remains. Regards Link to comment Share on other sites More sharing options...
Jim_Hardin Posted December 3, 2008 Report Share Posted December 3, 2008 Hello, I did a clean install, installed the fix, but the problem remains. Regards There are only a certain number of Symptoms and Fixes that we are aware of… Since you have exhausted them, you need to pickup your phone and call Tech Support. Link to comment Share on other sites More sharing options...
Jim_Hardin Posted November 28, 2008 Report Share Posted November 28, 2008 Hi, No, my other post was about the "xxxx.png found but could not be loaded". That has been solved thanks to the "pinned" procedure. The problem that remains is when RoxioCentral starts; You see the splash screen and after a while (this can be a few seconds or 10 seconds) the MS message "this application has encountered....." appears. I've read the posts on the .NET 3.5 SP1 issue, but apparently the result is the same but the cause is not..... I have .NET 3.5 but not SP1 and milcore.dll is there allright. I did already several clean installs without success. Regards You need the SP1 fix – http://www.roxio.com/enu/support/c2009/software_updates.html Download it - Run it - Reboot Link to comment Share on other sites More sharing options...
Ducmaster Posted December 3, 2008 Author Report Share Posted December 3, 2008 OK. I logged a call with Roxio. I'll post the solution (if there's one ...... ;-) ) Thanks for your help. Link to comment Share on other sites More sharing options...
Jim_Hardin Posted December 3, 2008 Report Share Posted December 3, 2008 OK. I logged a call with Roxio. I'll post the solution (if there's one ...... ;-) ) Thanks for your help. Look forward to your resolution – I just realized you are in Belgium. Link to comment Share on other sites More sharing options...
gi7omy Posted November 25, 2008 Report Share Posted November 25, 2008 Ducmaster - if you didn't have SP1 installed, then you don't have the same problem - what you have is something different. Please start a new thread so that someone can deal with your problem on its own rather than having conflicting ideas running through the thread Link to comment Share on other sites More sharing options...
grandpabruce Posted November 25, 2008 Report Share Posted November 25, 2008 I have exactly the same error. I did a clean install (several times), I never had .NET 3.5 SP1 installed (only 3.5) , my milcore.dll is there alright,... BUT it still doesn't work !! The error appears when I load Roxio Central. On the splash screen, you see the modules Roxio is loading. I remarked that the error doesn't appear every time at the same module. Sometimes it is after 2 modules, sometimes nearly at the end.... Anyone ???? HELP. Did you ever get your problem resolved, in another thread you posted in, here? http://forums.support.roxio.com/index.php?...mp;#entry238524 You evidently forgot to come back and let folks know, one way or the other. Link to comment Share on other sites More sharing options...
Question
Ducmaster
I have exactly the same error.
I did a clean install (several times), I never had .NET 3.5 SP1 installed (only 3.5) , my milcore.dll is there alright,...
BUT it still doesn't work !!
The error appears when I load Roxio Central. On the splash screen, you see the modules Roxio is loading.
I remarked that the error doesn't appear every time at the same module. Sometimes it is after 2 modules, sometimes nearly at the end....
Anyone ???? HELP.
Link to comment
Share on other sites
8 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.