willwoms Posted January 17, 2009 Report Share Posted January 17, 2009 800450180 error while opening project came up when i was about to burn a dvd which i had just edited in the advanced movie section on creator 2009.I seem to be getting problems always round trying to get my movies from camcorder to disk help please. Link to comment Share on other sites More sharing options...
willwoms Posted January 19, 2009 Author Report Share Posted January 19, 2009 Good to see that it worked for you! Steve has the right idea on getting a new laptop. Let us know what you decide. Thanks everyone for you help it is most welcome i was getting ready to either slit my wrists or launch the pc out of the window.Thanks again. Paul Link to comment Share on other sites More sharing options...
willwoms Posted January 17, 2009 Author Report Share Posted January 17, 2009 If i use the output as section when i have edited my camcorder movie instead of the dvd button it has create video file at the bottom if i click this it starts rendering the footage once done will this burn direct to disk using the creator classic if i am not right what actually is this option for.I am using roxio creator ultimate 2009. Link to comment Share on other sites More sharing options...
Jim_Hardin Posted January 17, 2009 Report Share Posted January 17, 2009 800450180 error while opening project came up when i was about to burn a dvd which i had just edited in the advanced movie section on creator 2009.I seem to be getting problems always round trying to get my movies from camcorder to disk help please. Oh I hope you don't think that was clear enough for anyone to make a guess about??? Post back with more detail and less editorial Link to comment Share on other sites More sharing options...
Jim_Hardin Posted January 17, 2009 Report Share Posted January 17, 2009 Classic will burn any file you got to a disc! Will it work as a DVD Movie? Absolutely not! The is a posting on Strategy in Tips & Tricks that you need to read. Link to comment Share on other sites More sharing options...
ggrussell Posted January 17, 2009 Report Share Posted January 17, 2009 If i use the output as section when i have edited my camcorder movie instead of the dvd button it has create video file at the bottom ......if i am not right what actually is this option for.There are many reason to output to a file. To upload to You Tube is a good example. Some of us own other video editors. Perhaps there is a special effect that Roxio doesn't have so we output to file and use that file in another editor. There are many uses for output to file. Link to comment Share on other sites More sharing options...
willwoms Posted January 17, 2009 Author Report Share Posted January 17, 2009 There are many reason to output to a file. To upload to You Tube is a good example. Some of us own other video editors. Perhaps there is a special effect that Roxio doesn't have so we output to file and use that file in another editor. There are many uses for output to file. Could anyone give me advice on any other editing software that i could use to edit dvd camcorder footage if i cant solve my issues with creator 2009. Link to comment Share on other sites More sharing options...
ggrussell Posted January 17, 2009 Report Share Posted January 17, 2009 What issues are you having? Be specific. What applications you are using and what steps you have taken. Try not to leave anything out. Sounds like you're just inexperienced with video editing. Link to comment Share on other sites More sharing options...
willwoms Posted January 17, 2009 Author Report Share Posted January 17, 2009 Oh I hope you don't think that was clear enough for anyone to make a guess about??? Post back with more detail and less editorial I used creator 2009 to edit my movie and when i clicked the dvd button everything went ok until it started to do the encoding when i got the error code above.I have also got other error codes when encoding,it seems strange because i was getting error codes saying cant encode but on one occasion it worked and produced a good dvd so i thought my problems were over but here i am again.If you need any more info off will you give me some idea of what you want i am not too clued up at this thanks Paul. Link to comment Share on other sites More sharing options...
willwoms Posted January 17, 2009 Author Report Share Posted January 17, 2009 What issues are you having? Be specific. What applications you are using and what steps you have taken. Try not to leave anything out. I am using creator 2009 i edit my movie no problem then when i come to burn it to a dvd i get error messages one was 80045018 error while opening project the other was 800040005 error while encoding movie.I have got some advice from support about when i click burn do it as image file or folder set but these produce the error codes aswell.I have already managed to burn one edited film to disk so why do i get these errors when it is capable of doing the job.Also they said to defrag my pc which i did but no result from that thanks Paul Link to comment Share on other sites More sharing options...
bimicher Posted January 17, 2009 Report Share Posted January 17, 2009 I am using creator 2009 i edit my movie no problem then when i come to burn it to a dvd i get error messages one was 80045018 error while opening project the other was 800040005 error while encoding movie.I have got some advice from support about when i click burn do it as image file or folder set but these produce the error codes aswell.I have already managed to burn one edited film to disk so why do i get these errors when it is capable of doing the job.Also they said to defrag my pc which i did but no result from that thanks Paul I think it would be a good idea for you to read (and printout) the workflow strategy written by Jim Hardin Also please list your computer specs especially video card. Link to comment Share on other sites More sharing options...
grandpabruce Posted January 19, 2009 Report Share Posted January 19, 2009 Thanks everyone for you help it is most welcome i was getting ready to either slit my wrists or launch the pc out of the window.Thanks again. Paul You're welcome. Link to comment Share on other sites More sharing options...
willwoms Posted January 17, 2009 Author Report Share Posted January 17, 2009 I think it would be a good idea for you to read (and printout) the workflow strategy written by Jim Hardin Also please list your computer specs especially video card. My pc has an intel®82915g/gv/910glexpress chipset it says its internal and 128mb i have windows xp with 1gb ram and 160hd i have no problem putting my movies together and putting titles etc it all when i come to encode and burn i dont know what else i can tell you without you asking me specific questions.I dont know if you do things like msn chat but i would do that if you could help . Link to comment Share on other sites More sharing options...
bimicher Posted January 17, 2009 Report Share Posted January 17, 2009 My pc has an intel®82915g/gv/910glexpress chipset it says its internal and 128mb i have windows xp with 1gb ram and 160hd i have no problem putting my movies together and putting titles etc it all when i come to encode and burn i dont know what else i can tell you without you asking me specific questions.I dont know if you do things like msn chat but i would do that if you could help . Could you explain exactly what you are doing? What are your source files (video, image, etc),what kind of editing are you doing? Waht format are your source files? How long in time is your production? Have you tried rendering in the software mode if its currently inhardware (use File/options)? Have you updated drivers for your (on-board?) chipset? Are you running the latest version of DirectX 9c? I assume you are using Videowave to create your video project (edit, add audio, etc) and then adding the Videowave project in myDVD. While in VW can you output as to a DVD mpeg file? That will tell you if there is a problem with the source video and where the problem is. Link to comment Share on other sites More sharing options...
willwoms Posted January 17, 2009 Author Report Share Posted January 17, 2009 Could you explain exactly what you are doing? What are your source files (video, image, etc),what kind of editing are you doing? Waht format are your source files? How long in time is your production? Have you tried rendering in the software mode if its currently inhardware (use File/options)? Have you updated drivers for your (on-board?) chipset? Are you running the latest version of DirectX 9c? I assume you are using Videowave to create your video project (edit, add audio, etc) and then adding the Videowave project in myDVD. While in VW can you output as to a DVD mpeg file? That will tell you if there is a problem with the source video and where the problem is. I am editing video from a DVD camcorder as far as editing goes i am putting all the clips together in videowave with a scrolling title at the beginning and the end.The files show up as mpg files i dony know if that is because i have viewed them with windows media player.I have to use mydvd le to take them off the camera.My rendering is set to software rendering.As for the drivers i cant find newer ones than the ones i have which is oct 2005.I am running the latest directx 9c.I tried to output as a dvd mpeg file but it wont even let me open the editing part of creator it says it needs video wave and it is running on another user account but i have checked and its not running on any other accounts. Link to comment Share on other sites More sharing options...
grandpabruce Posted January 17, 2009 Report Share Posted January 17, 2009 I am editing video from a DVD camcorder as far as editing goes i am putting all the clips together in videowave with a scrolling title at the beginning and the end.The files show up as mpg files i dony know if that is because i have viewed them with windows media player.I have to use mydvd le to take them off the camera.My rendering is set to software rendering.As for the drivers i cant find newer ones than the ones i have which is oct 2005.I am running the latest directx 9c.I tried to output as a dvd mpeg file but it wont even let me open the editing part of creator it says it needs video wave and it is running on another user account but i have checked and its not running on any other accounts. I think that there are drivers out there that are newer than 2005, but if what you say, about having the most current drivers is accurate, the video chip doesn't have the horses to do the video editing. If your computer is a laptop, you are SOL. If you have a desktop, get a stand alone video card. Link to comment Share on other sites More sharing options...
willwoms Posted January 17, 2009 Author Report Share Posted January 17, 2009 I think that there are drivers out there that are newer than 2005, but if what you say, about having the most current drivers is accurate, the video chip doesn't have the horses to do the video editing. If your computer is a laptop, you are SOL. If you have a desktop, get a stand alone video card. If you say the video card is not upto the job how come it has worked fine with mydvd 8 for the last 2 years and it has let me do one movie with creator 2009 i just dont understand why it has worked but now it doesnt Link to comment Share on other sites More sharing options...
grandpabruce Posted January 18, 2009 Report Share Posted January 18, 2009 If you say the video card is not upto the job how come it has worked fine with mydvd 8 for the last 2 years and it has let me do one movie with creator 2009 i just dont understand why it has worked but now it doesnt No clue, except Creator 2009 is 3 versions newer, and is more demanding on the video card/chip. The important thing is, it isn't working. You could try downloading the latest version of DirectX, and see if that makes a difference. I don't have a link for it and have to go somewhere. Someone should drop in, and give you the link. Link to comment Share on other sites More sharing options...
willwoms Posted January 18, 2009 Author Report Share Posted January 18, 2009 No clue, except Creator 2009 is 3 versions newer, and is more demanding on the video card/chip. The important thing is, it isn't working. You could try downloading the latest version of DirectX, and see if that makes a difference. I don't have a link for it and have to go somewhere. Someone should drop in, and give you the link. I have downloaded the latest directx and it has successfully burnt a movie to disk hope this was the problem but saying that i have had it do this before.I am looking at getting a laptop what specifications do i need it to have to make sure it can cope with video editing and burning with the creator 2009. Link to comment Share on other sites More sharing options...
sknis Posted January 18, 2009 Report Share Posted January 18, 2009 I have downloaded the latest directx and it has successfully burnt a movie to disk hope this was the problem but saying that i have had it do this before.I am looking at getting a laptop what specifications do i need it to have to make sure it can cope with video editing and burning with the creator 2009. One designed for gaming will usually have a fast dual (or more) core CPU, lots of memory, and a stand alone video card and a good DVD burner. All major manufacturers will have a line designed for gaming. Buy the best you can afford. Dell XPS series; HP XDS series, Gateway P-7811FX, Alienware Area-51 m9750, Velocity Micro NoteMagix™ M15 Ultra, etc. Buy what you like and can afford. Don't think of one well under $1000 unless you get a real good steal. When you find one that you like come back and ask for opinions on this forum. Link to comment Share on other sites More sharing options...
grandpabruce Posted January 18, 2009 Report Share Posted January 18, 2009 I have downloaded the latest directx and it has successfully burnt a movie to disk hope this was the problem but saying that i have had it do this before.I am looking at getting a laptop what specifications do i need it to have to make sure it can cope with video editing and burning with the creator 2009. Good to see that it worked for you! Steve has the right idea on getting a new laptop. Let us know what you decide. Link to comment Share on other sites More sharing options...
Question
willwoms
800450180 error while opening project came up when i was about to burn a dvd which i had just edited in the advanced movie section on creator 2009.I seem to be getting problems always round trying to get my movies from camcorder to disk help please.
Link to comment
Share on other sites
20 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.