No Video Signal

[Tex2011]

I have a Sharp Camcorder Model VL-A111U. It has its own VCR built in and I can not get Video or Audio signal. I have reinstalled the software but no go I also tried running it through a VCR. It plays through the input on TV using the same cable the camcorder came with. Any ideas?

[Jim_Hardin]

What Version or Build of V2D do you have? (there are 4)

 

What are your PC Specs, like I have in my signature block)

 

How does it work with DVD Player hooked up to it?

[Tex2011]

A) Build is 201B23A, VHS

 

Windows 7 Ultimate SP1

Hp Pavilion

Intel Pentium Dual CPU T2310 @ 1.46 GHz

RAM: 4 GB

32-bit Operating System

Motherboard - Quanta 30CC (U2E1)

Graphics:

Name Generic PnP Monitor on Mobile Intel 965 Express Chipset Family

Current Resolution 1280x800 pixels

Work Resolution 1280x760 pixels

State enabled, primary

Monitor Width 1280

Monitor Height 800

Monitor BPP 32 bits per pixel

Monitor Frequency 59 Hz

Device \\.\DISPLAY1\Monitor0

Mobile Intel® 965 Express Chipset Family

Memory 384 MB

Memory type 2

Driver version 8.15.10.1930

Mobile Intel® 965 Express Chipset Family

Memory type 2

Driver version 8.15.10.1930

 

C) I have a sharp camcorder VL-A111 that has 3.5 mm Audio/Video Output. I have the original cables and bought a new audio/video cable with no success. The camcorder is a Hi8 and has its own VCR built-in.

 

What Version or Build of V2D do you have? (there are 4)

 

What are your PC Specs, like I have in my signature block)

 

How does it work with DVD Player hooked up to it?

[Jim_Hardin]

Read through cdanteek’s pinned post at the top detailing a Vista Install. (OS is not really relevant here…)

 

Compare his screen caps with your own Device Manager. If they don’t match, it isn’t going to work