Jump to content
  • 0

Video Import In Smart Screen


hotovost
 Share

Question

After clicking Scan tape tyhe program creates new scene's, the media scanns to the end of tape. After selecting thumbnails of the scenes that I want to import and click capture now to record the selected screens, media imports start capturing the selected screens. The import never compleets and keeps capturing to the end of the tape. no thumbnails representing captured video files appear in the import Bin.

Link to comment
Share on other sites

12 answers to this question

Recommended Posts

  • 0

I cannot duplicate your results???

 

I scan a tape:

 

post-39730-005474900 1309115556.jpg

 

I pick 3 Scenes to Capture:

 

post-39730-008817100 1309115559.jpg

 

I get those 3 Scenes and you can see it stopped (purple arrows) at the next detected Scene...

 

post-39730-025553100 1309115562.jpg

 

How about some details about your OS, your camcorder etc. (Win7 will probably need to run in 1394 Legacy mode)

 

Has it ever worked for you?

Link to comment
Share on other sites

  • 0

After clicking Scan tape tyhe program creates new scene's, the media scanns to the end of tape. After selecting thumbnails of the scenes that I want to import and click capture now to record the selected screens, media imports start capturing the selected screens. The import never compleets and keeps capturing to the end of the tape. no thumbnails representing captured video files appear in the import Bin.

Thank you for your reply. I noticed that you are using NORMAL SCAN. I have no problem in the normal scan mode. The above listed problem only exists when I try to use the "SMART SCAN".

Link to comment
Share on other sites

  • 0

Thank you for your reply. I noticed that you are using NORMAL SCAN. I have no problem in the normal scan mode. The above listed problem only exists when I try to use the "SMART SCAN".

 

Don't you see that Jim has selected "Smart Scan"? Why do you say he is using Normal Scan?

Link to comment
Share on other sites

  • 0

The Smart Scan never worked. I just purchased R0xio 2011 last month. My computr knoledge is very limited. You are asking about my OS, and I dont know what is ment by OS.I have Windows 7 (ultimate)instaled on ny computer.

Processor: Pentium ® Dual Core CPU E6300 @ 2.80 GHz 2.80 GHz

Memory Ram 2.00 GB

Sustem Type: 32-bit Operating System

Pan and Touch: No Pan or Touch is availaable for this display

The video camera I am using is Sumsung model# SC-D382/XAA.

I will need to cobtact my compuer expert to make sure that my Windows 7 is capable to run in 1394.

Link to comment
Share on other sites

  • 0

The Smart Scan never worked. I just purchased R0xio 2011 last month. My computr knoledge is very limited. You are asking about my OS, and I dont know what is ment by OS.I have Windows 7 (ultimate)instaled on ny computer.

Processor: Pentium ® Dual Core CPU E6300 @ 2.80 GHz 2.80 GHz

Memory Ram 2.00 GB

Sustem Type: 32-bit Operating System

Pan and Touch: No Pan or Touch is availaable for this display

The video camera I am using is Sumsung model# SC-D382/XAA.

I will need to cobtact my compuer expert to make sure that my Windows 7 is capable to run in 1394.

Yes, OS = Operating System: post-39730-063130500 1310208461.jpg

 

Sounds like a nice PC ;)

 

There is a pinned post at the top of this forum ("FireWire camcorder not recognized") which outlines checking Win7 and how to set the 1394 to Legacy.

 

While yours is already recognized, it still may require the 'Legacy' setting to work properly!

 

And it is possible that it may not work with your camcorder... I've been using FireWire capture even before Roxio got into it (2003) and I know many camcorders simply did not work properly with it :o But the last part you need to check out is the Win7 Legacy issue.

 

Even if it doesn't work, not a big deal... I have been at this since Roxio started to offer it and have yet to bother scanning for scenes... For my use, too many false scenes get detected and I prefer to capture all then split it up manually.

Link to comment
Share on other sites

  • 0

Dear Jim,

 

Thank you for your reply.The Legasy setting works properly and I have decided to take your

suggestion to use Normal Scan, and run into another problem. The program will capture the entire tape

and during the process the individual clips will start to show in the recently imported window.After the capture of the entire tape the individual clips will disapeer and change to one clip consisting of the entire tape, and will be saved to my videos on the hard drive.When I go to edit video-advance and click on

add photo/video, only one thumbnail appears, consisting of the entire tape. What am I douing wronh?

Link to comment
Share on other sites

  • 0

I don't think anything is wrong??? Been so long since I used tape, I will have to drag one out and try it today ;)

 

Check back later.

 

 

In Video Wave, look at the left and select "Show Media Selector" You should see some videos with little right arrows and others with right and down arrows, click on the down arrows.

 

 

post-58-074198200 1310403427.jpg

 

 

Just a reminder that there is a little down arrow that shows the scenes if you click on it.

 

Watch this video. I think it will help.

Edited by sknis
Link to comment
Share on other sites

  • 0

In Video Wave, look at the left and select "Show Media Selector" You should see some videos with little right arrows and others with right and down arrows, click on the down arrows.

 

 

post-58-074198200 1310403427.jpg

 

 

Just a reminder that there is a little down arrow that shows the scenes if you click on it.

 

Watch this video. I think it will help.

Dear Saknis,

Thank you very very much for your help.Your solution to my problems works grate.You would not beleive how many stupid solutions I got from raxio tech support.I have also called roxio toll free phone numer

and ended up talking to some guy in India whose english was so bad that I had to keep asking to repeat over and over again and he could not solve my problem. Again thank you very much for your help.

 

Joe Bauer

Link to comment
Share on other sites

  • 0

Dear Jim,

Thank you very very much for your help.Your solution to my problems works grate.You would not beleive how many stupid solutions I got from raxio tech support.I have also called roxio toll free phone numer

and ended up talking to some guy in India whose english was so bad that I had to keep asking to repeat over and over again and he could not solve my problem. Again thank you very much for your help.

 

Joe Bauer

Link to comment
Share on other sites

  • 0

Glad you got a solution ~ other problems??? Drop in anytime ;)

 

I have had some overseas Tech Support that was just plain afual! On the other hand, I have had Techs in Philadelphia and Baltimore that seemed to be speaking Mumble. Southern Mumble at that :o

Edited by Jim_Hardin
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Answer this question...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...