NFF314 Posted November 9, 2011 Report Share Posted November 9, 2011 Hi I just reloaded version 6 and attempted to create a disk of data and the roxio does not see my drives, When going to my computer they are listed. What can I do to resolve this . I do not want to upgrade to another Roxio version... Any help would be apprecaited. Thank you! Link to comment Share on other sites More sharing options...
ogdens Posted November 9, 2011 Report Share Posted November 9, 2011 Hi I just reloaded version 6 and attempted to create a disk of data and the roxio does not see my drives, When going to my computer they are listed. What can I do to resolve this . I do not want to upgrade to another Roxio version... Any help would be apprecaited. Thank you! Try this.... http://images.roxio.com/en/support/pxengine3_00_58a.zip Link to comment Share on other sites More sharing options...
NFF314 Posted November 9, 2011 Author Report Share Posted November 9, 2011 Try this.... http://images.roxio.com/en/support/pxengine3_00_58a.zip Thank you so much, it worked!!!! Link to comment Share on other sites More sharing options...
NFF314 Posted November 9, 2011 Author Report Share Posted November 9, 2011 Try this.... http://images.roxio.com/en/support/pxengine3_00_58a.zip I did load it and saw one of the two drives that I have installed and now it see's only one drive and when I put in a blank CD, I get a message to put in a blank cd, although there is no in there. Can you still help? Link to comment Share on other sites More sharing options...
ogdens Posted November 9, 2011 Report Share Posted November 9, 2011 I did load it and saw one of the two drives that I have installed and now it see's only one drive and when I put in a blank CD, I get a message to put in a blank cd, although there is no in there. Can you still help? Were both drives working before you re-installed the Roxio software?. Also, does Windows see the drive that the Roxio doesn't?. Link to comment Share on other sites More sharing options...
NFF314 Posted November 9, 2011 Author Report Share Posted November 9, 2011 Were both drives working before you re-installed the Roxio software?. Also, does Windows see the drive that the Roxio doesn't?. Both drives were working prior to the install of Roxio and windows only shows the one drive now. any suggestions? Do you want me to call you to discuss? Link to comment Share on other sites More sharing options...
cdanteek Posted November 10, 2011 Report Share Posted November 10, 2011 I just reloaded version 6 On what operating system and service packs? Version of Internet Explorer and Windows Media Player? Link to comment Share on other sites More sharing options...
NFF314 Posted November 10, 2011 Author Report Share Posted November 10, 2011 On what operating system and service packs? Version of Internet Explorer and Windows Media Player? Thank you, I am using Internet Explorer 8, Windows Xp Service Pack 3 Link to comment Share on other sites More sharing options...
cdanteek Posted November 10, 2011 Report Share Posted November 10, 2011 Thank you, I am using Internet Explorer 8, Windows Xp Service Pack 3 Did it work before with IE 8? Newer versions of IE have caused Roxio Applications to break same same newer versions of Windows Media Player. Did you have a the Creator6 updates saved on your PC/backup? Or did you just install from the disc? If so what version # are you? Problem is Roxio isn't hosting/supporting them where they should be! Do you have Basic or Platinum? Easy CD & DVD Creator 6 Platinum Engine Update (Required) Updates Easy CD & DVD Creator's Burning (Recording) Engine, which is used by all components of the Creator Suite. Locate and install the Engine update by double clicking it. After installing this update, please reboot your system. For more information on fixes included click here . Download Creator Classic Update Updates the Creator Classic and Disc Copier components of Easy CD & DVD Creator 6 Platinum Locate and install the Creator Classic update by double clicking it. After installing this update, please reboot your system. For more information on fixes included click here . Download DVD Builder Update Updates DVD Builder in Easy CD & DVD Creator 6 Platinum Locate and install the DVD Builder update by double clicking it. After installing this update, please reboot your system. For more information on fixes included click here . Download Drag-to-Disc Update Updates the Drag-to-Disc components of Easy CD & DVD Creator 6.0.x.x Locate and install the Drag-to-Disc update by double clicking it. After installing this update, please reboot your system. For more information on fixes included click here . Download Label Creator Update Updates the Label Creator components of Easy CD & DVD Creator 6.0.x.x Locate and install the Label Creator update by double clicking it. After installing this update, please reboot your system. For more information on fixes included click here . Download AudioCentral Update Updates the Audio Central components of Easy CD & DVD Creator 6.0.x.x Locate and install the Audio Central update by double clicking it. After installing this update, please reboot your system. For more information on fixes included click here . Download PhotoSuite Update This Update is PhotoSuite Version Specific, you will need to find the version of PhotoSuite installed on your system before selecting the update. To find the version of PhotoSuite that you have installed first open PhotoSuite and then Go To "Help" and then to "About Roxio PhotoSuite", once the About box opens you will find the version at the bottom center. If you have version 5.1.2529.0 or higher this update is not needed. Updates the PhotoSuite components of Easy CD & DVD Creator 6 PhotoSuite version 5.0.1366.0 only. Note: The latest Easy CD & DVD Creator Engine update should have already been installed. (This update will take 5 to 20 minutes to install, there is no progress bar, so you should not interrupt it.) Download Updates the PhotoSuite components of Easy CD & DVD Creator 6 PhotoSuite version 5.0.1419.0 only. Note: The latest Easy CD & DVD Creator Engine update should have already been installed. (This update will take 5 to 20 minutes to install, there is no progress bar, so you should not interrupt it.) Download Drive Update This update is not needed unless Easy CD & DVD Creator 6 or one of its components does not recognize your CD or DVD Burner. Note: The latest Easy CD & DVD Creator Engine update should have already been installed. Download Link to comment Share on other sites More sharing options...
cdanteek Posted November 10, 2011 Report Share Posted November 10, 2011 Support > Easy CD & DVD Creator 6.x > Software Updates Easy CD & DVD Creator 6 Platinum http://www.roxio.com.es/enu/support/ecddvdc/software_updatesv6_plat.html# You better save them this time! Easy CD & DVD Creator 6 PlatinumEngine Update (Required) Updates Easy CD & DVD Creator's Burning (Recording) Engine, which is used by all components of the Creator Suite. Locate and install the Engine update by double clicking it. After installing this update, please reboot your system. For more information on fixes included click here . Download Creator Classic Update Updates the Creator Classic and Disc Copier components of Easy CD & DVD Creator 6 Platinum Locate and install the Creator Classic update by double clicking it. After installing this update, please reboot your system. For more information on fixes included click here . Download DVD Builder Update Updates DVD Builder in Easy CD & DVD Creator 6 Platinum Locate and install the DVD Builder update by double clicking it. After installing this update, please reboot your system. For more information on fixes included click here . Download Drag-to-Disc Update Updates the Drag-to-Disc components of Easy CD & DVD Creator 6.0.x.x Locate and install the Drag-to-Disc update by double clicking it. After installing this update, please reboot your system. For more information on fixes included click here . Download Label Creator Update Updates the Label Creator components of Easy CD & DVD Creator 6.0.x.x Locate and install the Label Creator update by double clicking it. After installing this update, please reboot your system. For more information on fixes included click here . Download AudioCentral Update Updates the Audio Central components of Easy CD & DVD Creator 6.0.x.x Locate and install the Audio Central update by double clicking it. After installing this update, please reboot your system. For more information on fixes included click here . Download PhotoSuite Update This Update is PhotoSuite Version Specific, you will need to find the version of PhotoSuite installed on your system before selecting the update. To find the version of PhotoSuite that you have installed first open PhotoSuite and then Go To "Help" and then to "About Roxio PhotoSuite", once the About box opens you will find the version at the bottom center. If you have version 5.1.2529.0 or higher this update is not needed. Updates the PhotoSuite components of Easy CD & DVD Creator 6 PhotoSuite version 5.0.1366.0 only. Note: The latest Easy CD & DVD Creator Engine update should have already been installed. (This update will take 5 to 20 minutes to install, there is no progress bar, so you should not interrupt it.) Download Updates the PhotoSuite components of Easy CD & DVD Creator 6 PhotoSuite version 5.0.1419.0 only. Note: The latest Easy CD & DVD Creator Engine update should have already been installed. (This update will take 5 to 20 minutes to install, there is no progress bar, so you should not interrupt it.) Download Drive Update This update is not needed unless Easy CD & DVD Creator 6 or one of its components does not recognize your CD or DVD Burner. Note: The latest Easy CD & DVD Creator Engine update should have already been installed. Download Link to comment Share on other sites More sharing options...
ogdens Posted November 13, 2011 Report Share Posted November 13, 2011 You did not get back with any answers to the questions that you were asked in post # 9. Have you tried to use the internal burning capabilities of XP to see if the burners work ok? Link to comment Share on other sites More sharing options...
NFF314 Posted November 13, 2011 Author Report Share Posted November 13, 2011 You did not get back with any answers to the questions that you were asked in post # 9. Have you tried to use the internal burning capabilities of XP to see if the burners work ok? yes, sorry, the CD burners do work without Roxio, I am using version 6 and deinstalled again. Maybe the best way is to start another install this will be the fifth. I am not a novice to using a Pc but this one has me stumped. There is no one at Roxio to offer live support, by any chance can you? Thank you! Link to comment Share on other sites More sharing options...
cdanteek Posted November 13, 2011 Report Share Posted November 13, 2011 yes, sorry, the CD burners do work without Roxio, I am using version 6 and deinstalled again. Maybe the best way is to start another install this will be the fifth. I am not a novice to using a Pc but this one has me stumped. There is no one at Roxio to offer live support, by any chance can you? Thank you! Obviously installing and uninstalling aren't getting you anywhere. Have you downloaded the updates and applied them in the correct order with the links I provided? Your version 6 came out eight years ago and Roxio says they don't support it anymore. The techs on the support phones have probably never used or worked with this old software! Your best bet is to slow down and read the post's in this thread. Then answer every question asked. Link to comment Share on other sites More sharing options...
ogdens Posted November 13, 2011 Report Share Posted November 13, 2011 yes, sorry, the CD burners do work without Roxio, I am using version 6 and deinstalled again. Maybe the best way is to start another install this will be the fifth. I am not a novice to using a Pc but this one has me stumped. There is no one at Roxio to offer live support, by any chance can you? Thank you! You still did not answer the questions in post #9.........we are trying to help you, but for some reason you refise to answer our questions. Link to comment Share on other sites More sharing options...
NFF314 Posted November 15, 2011 Author Report Share Posted November 15, 2011 You still did not answer the questions in post #9.........we are trying to help you, but for some reason you refise to answer our questions. Did it work before with IE 8? Newer versions of IE have caused Roxio Applications to break same same newer versions of Windows Media Player. > Yes, it did work with IE 8 Did you have a the Creator6 updates saved on your PC/backup? Or did you just install from the disc? > Installed from the disk If so what version # are you? Version 6 Platinum Edition Problem is Roxio isn't hosting/supporting them where they should be! Do you have Basic or Platinum? Version 6 Platinum Edition Link to comment Share on other sites More sharing options...
cdanteek Posted November 16, 2011 Report Share Posted November 16, 2011 Did it work before with IE 8? Newer versions of IE have caused Roxio Applications to break same same newer versions of Windows Media Player. > Yes, it did work with IE 8 Did you have a the Creator6 updates saved on your PC/backup? Or did you just install from the disc? > Installed from the disk If so what version # are you? Version 6 Platinum Edition Problem is Roxio isn't hosting/supporting them where they should be! Do you have Basic or Platinum? Version 6 Platinum Edition Then why haven't you clicked on the blue link in post #10 that takes you to the updates? There is a drive update for missing drives but has to be installed after the engine update. You haven't followed anyone's suggestion in this thread yet so I'm doubtful you will this time! Support > Easy CD & DVD Creator 6.x > Software UpdatesEasy CD & DVD Creator 6 Platinum Engine Update (Required) Updates Easy CD & DVD Creator's Burning (Recording) Engine, which is used by all components of the Creator Suite. Locate and install the Engine update by double clicking it. After installing this update, please reboot your system. For more information on fixes included click here . Download Creator Classic Update Updates the Creator Classic and Disc Copier components of Easy CD & DVD Creator 6 Platinum Locate and install the Creator Classic update by double clicking it. After installing this update, please reboot your system. For more information on fixes included click here . Download DVD Builder Update Updates DVD Builder in Easy CD & DVD Creator 6 Platinum Locate and install the DVD Builder update by double clicking it. After installing this update, please reboot your system. For more information on fixes included click here . Download Drag-to-Disc Update Updates the Drag-to-Disc components of Easy CD & DVD Creator 6.0.x.x Locate and install the Drag-to-Disc update by double clicking it. After installing this update, please reboot your system. For more information on fixes included click here . Download Label Creator Update Updates the Label Creator components of Easy CD & DVD Creator 6.0.x.x Locate and install the Label Creator update by double clicking it. After installing this update, please reboot your system. For more information on fixes included click here . Download AudioCentral Update Updates the Audio Central components of Easy CD & DVD Creator 6.0.x.x Locate and install the Audio Central update by double clicking it. After installing this update, please reboot your system. For more information on fixes included click here . Download PhotoSuite Update This Update is PhotoSuite Version Specific, you will need to find the version of PhotoSuite installed on your system before selecting the update. To find the version of PhotoSuite that you have installed first open PhotoSuite and then Go To "Help" and then to "About Roxio PhotoSuite", once the About box opens you will find the version at the bottom center. If you have version 5.1.2529.0 or higher this update is not needed. Updates the PhotoSuite components of Easy CD & DVD Creator 6 PhotoSuite version 5.0.1366.0 only. Note: The latest Easy CD & DVD Creator Engine update should have already been installed. (This update will take 5 to 20 minutes to install, there is no progress bar, so you should not interrupt it.) Download Updates the PhotoSuite components of Easy CD & DVD Creator 6 PhotoSuite version 5.0.1419.0 only. Note: The latest Easy CD & DVD Creator Engine update should have already been installed. (This update will take 5 to 20 minutes to install, there is no progress bar, so you should not interrupt it.) Download Drive Update This update is not needed unless Easy CD & DVD Creator 6 or one of its components does not recognize your CD or DVD Burner. Note: The latest Easy CD & DVD Creator Engine update should have already been installed. Download Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.