Jump to content
  • 0
KingHoovy

'capture' Will Not Work.

Question

I've gotten it to launch, but now it won't record. Upon opening, it just says no signal. If I change the Quality slider, it picks up sound and the background color of the screen, but that is all. If I try to go to 'Options', it stops responding. If I try to change to Component, it stops responding. Etc, etc.

Share this post


Link to post
Share on other sites

18 answers to this question

Recommended Posts

  • 0

I've gotten it to launch, but now it won't record. Upon opening, it just says no signal. If I change the Quality slider, it picks up sound and the background color of the screen, but that is all. If I try to go to 'Options', it stops responding. If I try to change to Component, it stops responding. Etc, etc.

 

Search through the posts, in this forum. You will see a number of possible fixes for your problem, but YOU have to do the reading.

Share this post


Link to post
Share on other sites
  • 0

I've already read many other posts, and now I've gone and read ALL of them related to mine. 0 of them have a fix for it. The only thing that would even apply to it is a repair, which I've done twice. Now, if I could kindly get some actual help with the problem, it'd be great.

Edited by KingHoovy

Share this post


Link to post
Share on other sites
  • 0

I've already read many other posts, and now I've gone and read ALL of them related to mine. 0 of them have a fix for it. The only thing that would even apply to it is a repair, which I've done twice. Now, if I could kindly get some actual help with the problem, it'd be great.

 

You want spoon-fed pre-chewed easy-to-digest fix it information?

 

We are users like yourself trying to help other users.

 

We can't reach out and slap your PC or software with a stick and fix it.

 

Does the driver show in the correct location in device manager?

 

Are you connected correctly?

 

Did you plugin the RGC USB Device before installing the software?

Share this post


Link to post
Share on other sites
  • 0

1. Yes, if possible, that would be extremely helpful. Isn't that the point of this forum?

 

2. I realize that, and I know you are capable of directly helping me rather than sending me on a scavenger hunt that I learn nothing from.

 

3. But you can at least help me rather than.. well.. ^

 

4. Yes

 

5. Yes.

 

6. I don't remember at all.. it was done over a month ago.

 

Extra info: As far as wires and settings go, they should be fine; I've recorded, edited, and upload 25 videos over the last month+ with no issues, and no wires or settings have been changed since then. My computer specifications are well beyond what is needed for the card, and that was proved over the last month.

Share this post


Link to post
Share on other sites
  • 0
I've recorded, edited, and upload 25 videos over the last month+ with no issues, and no wires or settings have been changed since then.

 

Omitted information that should of been included in your first post, so anyone trying to help you doesn't waste their time wading through questions you could of provided upfront!

 

Your statement above proves something on your computer changed. Who better than you knows what changed?

Share this post


Link to post
Share on other sites
  • 0

??? what happened since THIS topic? :huh:

 

Can we move forward with this now?

 

What shows in your Device Manager with the device plugged in?

 

What color in the "No Signal", red or green?

 

What do you have hooked up to the RGC?

 

HOW?

 

What happens when you try another device like a DVD or BD Player fro the source?

Share this post


Link to post
Share on other sites
  • 0

1: I repaired it. That fixed the launch issue, but now it has an issue running.

 

2. I sure hope so.

 

3. Logitech G35 Headset, NVIDIA High Definition Audio(x4), Roxio GameCAP HD Pro, VIA High Definition Audio.

 

4. The No Signal is red.

 

5. It is hooked up from the Xbox 360 to the pc / tv screen

 

6. HDMI from Xbox to RGC input. USB from RGC to computer. HDMI From RGC to Tv.

 

7. I don't really understand that last part.

Share this post


Link to post
Share on other sites
  • 0
7. I don't really understand that last part.

 

Unplug your x box and plugin the HDMI to a DVD Player and see if it shows as source able to capture in the software?

Share this post


Link to post
Share on other sites
  • 0

Unplug your x box and plugin the HDMI to a DVD Player and see if it shows as source able to capture in the software?

Yes that is what I meant ;)

 

This way you can test it to try to pin down where the problem is!

 

The Red, 'no signal' indicates that the RCG device is being recognized and implies that the Driver is installed...

 

You didn't directly answer the Device Manager/Driver question ^_^

Share this post


Link to post
Share on other sites
  • 0

What do you need to know about the driver exactly? I have the window pulled open here.

 

Also, just checked the status again. It is stuck on 'Component' and the Red 'No Signal' changed to a red 'Capture Device'

 

Also/Also, if you want me to check to see if it picks up signal from another device(DVD player), could I use a Ps3 instead?

Edited by KingHoovy

Share this post


Link to post
Share on other sites
  • 0
could I use a Ps3 instead?

 

Ps3 to RGC USB Device has to use component cables due to Sony using HDCP on the Ps3 device.

Share this post


Link to post
Share on other sites
  • 0

I'm aware, but in the past, when 2 HDMI cables were connected, it still showed a signal, just the start record button was unavailable. If it shows a signal then, would it do the same now?

 

If not, I have component cables around somewhere

Edited by KingHoovy

Share this post


Link to post
Share on other sites
  • 0

Maybe it would be better if you get someone who is pretty savy about PC's to come over and work through this with you???

 

It is always good to have another one there as they often spot things you don't ;)

Share this post


Link to post
Share on other sites
  • 0

Which would be implying I'm not PC savvy.. which, depending on the area, is false.

 

I've checked and rechecked every aspect, I've rebooted, restarted, used different cables, trying them in different order, used them on different devices.. to the best of my knowledge, it simply quit on me. Still get the light and all that, but it's reverted back to not even opening 'Capture' again.

 

All I want is to get this thing back up and running so I can get back to recording and uploading videos :P

Share this post


Link to post
Share on other sites
  • 0

If you were as savvy as you think you are, you would know that the device has NOTHING to do with the Capture App opening and running :huh:

 

Looks like we covered everything from this end... Sorry it did not work out, good luck to you ^_^

Edited by Jim_Hardin

Share this post


Link to post
Share on other sites
  • 0

Well, when I came to the forums, I expected someone to help me and/or walk me through fixing this... Not tell me how much of an idiot I am. I've read through these forums, and there's people who I'm surprised were smart enough to get here in the first place. Yeah, sure, I have no clue how this thing works, but that's why I'm here, isn't it? I'm having a problem, and I want it fixed, simple as that.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×