Green Lines All Fuzzy And Purple

[SeanFromLeeds]

Hello

 

I've tried to follow many different tutorials on youtube on how to set this up but i've had no luck.

 

 

I plug all the games in correct slots and then on the side of my tv I have the colours

 

 

Green, blue red and then below it I have yellow, white, red

 

this is a hd tv.

I plugged the green,blue,red cables into the first set green,blue,red and the audio to red and white

 

 

I have the HDMI cable plugged in too so now when I turn ps3 on and go to display settings video output and select the second option then the screen goes black and I try to change it to "YPbPr" and the screen just stays black.

 

I don't have a clue how to fix this.

Help!!

[cdanteek]

When I click display settings on my ps3 and go to video output and click the second option then click change my screen goes black so then I change to my component channel and its still black and doesn't come on at all.

 

Are you connected like the pic and the video tell you?

 

Did you listen and follow the video tutorial to the 'T'?

[SeanFromLeeds]

No it didn't work at all :(

[Zanatos]

I just scanned through the posts, and I think I know whats going on here. You are going from using HDMI with your PS3, to now using component with your PS3. But, it doesnt switch over, correct? Its because the PS3 is weird when switching inputs from HDMI to component and vice versa. Right now its still looking for that good HDMI connect. Maybe.....I could be totally off base, but lets try.

 

1) Turn your PS3 off.

2) Hook up your GameCap with the component cables (unplug the HDMI cord if you have it plugged in at all)

3) Turn on your PS3 by pressing and holding the power buyer for about 10 seconds

 

This will send your PS3 into a video cycle where it will scan for an output. It should then see your new component video connection and should switch to that and you should have video restored.

[SeanFromLeeds]

when I connect the wires in component video out my pc/laptop screen goes mental loads of green flicky lines and some purple too

 

Anyone able to fix this for me please

• Like This
  

 

• Quote
  
• MultiQuote
  
• Topic Solved
  
• Edit
  

[SeanFromLeeds]

Yeah I've done that and nothing comes up at all just a blank screen even when I change to the component channel and I've held the power button when ps3 is turned off and its still not working.

 

Also when I connect the wires in component video out my pc/laptop screen goes mental loads of green flicky lines and some purple too

[ogdens]

Connect everything as shown in the picture in post #11.

 

Nothing else connected to the PS3 (no hdmi).

[SeanFromLeeds]

Any help here guys?

[SeanFromLeeds]

Hello,

 

I've plugged my cables into the following matching the colours up:

 

 

And when I plug all cables in go to display>video output and change to the second option the terminal one then switch channels to YPbPr nothing comes up at all. just a no signal black screen.

[SeanFromLeeds]

Sorry, I've took new picture..

 

its side ways:

[ogdens]

Turn the lights on ,

[SeanFromLeeds]

Is this the right slot to plug into

[cdanteek]

Yes as I've been using the HDMI before I got this roxio and on all the youtube videos the HDMI cable is plugged in to start off with then you need to change the display settings>video output to the compont ones and change channel but I did that and It's not coming on the channel.

 

I also tried to remove the HDMI cable and reset the PS3 and see if it came up and nope it didn't.

 

You have a problem understanding the how to written words and video tutorial.

 

I cannot reach over and fix it for you!

 

You need to do it yourself, if you don't understand or can't follow the instructions, get someone to help you.

[SeanFromLeeds]

Yes as I've been using the HDMI before I got this roxio and on all the youtube videos the HDMI cable is plugged in to start off with then you need to change the display settings>video output to the compont ones and change channel but I did that and It's not coming on the channel.

 

I also tried to remove the HDMI cable and reset the PS3 and see if it came up and nope it didn't.

[cdanteek]

When you change the Display settings and the Video Output settings is the HDMI plugged in?

[SeanFromLeeds]

Yes, I'm connected and still does not work.

[SeanFromLeeds]

When I click display settings on my ps3 and go to video output and click the second option then click change my screen goes black so then I change to my component channel and its still black and doesn't come on at all.

[cdanteek]

What happens when you listen and follow this video tutorial?

 

http://img.roxio.com...ls/ps3-540.html

[SeanFromLeeds]

The HDMI cable is only so I can change it to component onto my TV then I won't need it but It's not letting me pick up the componrent channel.

 

As said 3 times.

[SeanFromLeeds]

I already have that cable!!!

[cdanteek]

[SeanFromLeeds]

I normally run the PS3 by an HDMI Cable so when I have everything set up I turn my PS3 on that's running HDMI then I go to display settings video output and select the second option the screen goes blank and I try change channel to YPbPr and its still blank and does not work at all.

 

I have to have the HDMI cable in at first so I can see my TV/PS3 Screen.

No scart is invloved

[SeanFromLeeds]

when changing the display settings on my PS3 then the screen goes blank and I'm suppose to change channel so I change channel and its still BLANK!

[cdanteek]

I'm confused what would you like me to do mate?

 

If you can't follow and understand the written and video instructions, what is the problem?

 

Is there a SCART connector involved?

[SeanFromLeeds]

I'm confused what would you like me to do mate?

[cdanteek]

Right..

 

 

I have the HDMI cable that goes into my TV to my PS3 so I can see/view my tv screen.

I have all the cables in both sides of my roxio in the correct way.

When I go onto my PS3 to display and go to change display settings >video output then the second option and click change my screen goes blank so I change channel to YPbPr and then its still blank completely

 

Connect the Component Video cables between the outputs of the Roxio GameCAP device and the Component Video inputs to your TV.

Connect the RCA Audio cables between the outputs of the Roxio GameCAP device and the audio inputs to your TV.

Connect the USB to the Roxio GameCAP device and the USB2.0 port of your laptop or PC.

 

 

Read and follow the directions in post number 2!

 

If you can't do that get a friend that will..