Red " No Singal " Issues ( Xbox Hdmi )

[Alenori]

I looked around on here on have found nothing so far, I looking into going into the services area, and fixing the roxio media thing, can't fully remember the name. That did not work either.

I attached an RGC log as well.

I have tried

 

1. Uninstalling, re-installing.

2. repairing.

3. removing device software/drivers, and then re-installing.

 

 

Still did not work. Help would be appreciated.

RGC_Log_9212013_0.txt

[Jim_Hardin]

The file you included is not a Roxio file

 

What color is the "No Signal"?

 

Has it ever worked?

 

What shows in Device Manager when you plug in the RGB Device? Any Errors or Warnings showing there?

 

Have you tried it with a completely different Source ~ DVD or BD Player?

 

Were the 'Services' you refer to, the one in this post (last post)? HERE

[Alenori]

The file was taken using Roxio program, for system informations.

 

The color for no signal is Red, as it also says in the Title of this post.

 

The RGC worked before, then it just stopped working.

I had errors regarding .img files for the in-software buttons.

and yes a different source,and it still did not work.

I DID use the 'services' post to help to see if that was the problem, but it did not work.

[Jim_Hardin]

"System Info" from what? There is not one mention of anything 'Roxio' in that file

 

"I had errors regarding .img files for the in-software buttons" - what does that mean? How does it relate to Roxio?

 

This is extensive, but it what I suggest...

 

Unplug your RGC Device and put it aside until you are completely finished.

 

Download and install the

Revo

Uninstaller. Then run it in

Moderate Mode

to remove any traces of Roxio.

 

Create a New User Account with Administrator Privileges.

 

Turn OFF any A/V & Firewall.

 

Reboot and log on to that new account.

 

Copy your entire disc to a new folder on your HDD.

 

In that new folder, right click on Setup.exe and select Properties.

 

Under the Compatibility tab, make sure

nothing

is checked!

 

Right click Setup.exe and select Open.

 

Allow it to Check for Updates (this is for Roxio not Windows)

 

Use the Default Locations!

[Alenori]

"I had errors regarding .img files for the in-software buttons" - what does that mean? How does it relate to Roxio?

 

In Roxio using the Capture button, and clicking it to start the capture, it would show Errors regarding .img files for the Stop Capture button.

 

I have ultimately got this to work by completely uninstalling EVERYTHING to do with Roxio, including the RGC Device. I installed everything again, starting with the software then the drivers for the RGC Device.

 

It does have Hiccups every now and again, but I am able to get it back up and running, one main thing is that I will try to stop a capture then it would Not respond then freeze up the Capture Tools.