printing on hub printable cds

[daveglenn13]

I have 7.5 and can't firgure out how to print all the way to the center hole! It only prints like its a regular cd. What do I need to do to change this?

[rich86]

I have 7.5 and can't firgure out how to print all the way to the center hole! It only prints like its a regular cd. What do I need to do to change this?

 

This is controlled via "page setup" for the disc label. Click the "disc" tab - and select the appropriate "paper type". On my system, I have a selection for "Epson R300 Hub Print". I confess I do not recall if it came with this, or if I created it to print on hub printable media on my Epson R320. Check yours and if you do not have a selection to serve your purpose, come back and tell me exactly what printer you are using and maybe we can create something to work. Be forewarned - if we do this - you will be modifying files integral to how your label creator works and you will have to be diligent about backing up the original files in case you need to put them back, and be very careful and accurate in your mod's.

[102161]

I have an Epson Stylus R200 printer which prints directly on printable cd's. I've been using Epsons print cd software, which came with the printer and it is able to print all the way to the center hole. That software is unable to import the cd data. What I would like to do is use Roxio Label Creator and print all the way to the center hole.

[mackado]

This is exactly what I need to find out. I posted my question in the "general" topic area.

 

I just picked up a new batch of labels from the 'Stomper' brand that are both Standard and Full Face (allows printing to the center hub) and also has "Center Labels" only if you care to use those.

 

But the Stomper Templates available for EMC 7.0 under 'Page setup" do not match this labels, except in the old standard way.

 

I've read the instructions and played around with 'Label creator" and all attemps to update comes back empty ( has support expired for this version???), and still can't find any way to get this software to print all the way to the hub.

 

Is there any work around to this issue that I don't know??

 

Any "Plug ins" out there?

 

Like previously mentioned, other free software out there do not import 'objects' created in EMC which defeats the purpose of using EMC burning in the fisrt place.

[grandpabruce]

This is exactly what I need to find out. I posted my question in the "general" topic area.

 

I just picked up a new batch of labels from the 'Stomper' brand that are both Standard and Full Face (allows printing to the center hub) and also has "Center Labels" only if you care to use those.

 

But the Stomper Templates available for EMC 7.0 under 'Page setup" do not match this labels, except in the old standard way.

 

I've read the instructions and played around with 'Label creator" and all attemps to update comes back empty ( has support expired for this version???), and still can't find any way to get this software to print all the way to the hub.

 

Is there any work around to this issue that I don't know??

 

Any "Plug ins" out there?

 

Like previously mentioned, other free software out there do not import 'objects' created in EMC which defeats the purpose of using EMC burning in the fisrt place.

 

There sure aren't going to be any updates to the software, for this issue. It is 3 generations old.